ramips: apply consistent device name/compatible to ZBT-WE1026-5G

All Zbtlink ramips devices except the ZBT-WE1026-5G include the
zbt-/ZBT- prefix in their model name.

This changes ZBT-WE1026-5G to also follow that scheme.

The patch moves some block to keep alphatical order.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -445,10 +445,6 @@ youku,yk1)
 	set_wifi_led "$boardname:blue:air"
 	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
 	;;
-zbtlink,we1026-5g-16m)
-	ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
-	set_wifi_led "we1026-5g:green:wifi"
-	;;
 zbtlink,zbt-ape522ii)
 	ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
 	ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
@@ -461,6 +457,10 @@ zbtlink,zbt-we826-16m|\
 zbtlink,zbt-we826-32m)
 	set_wifi_led "zbt-we826:green:wifi"
 	;;
+zbtlink,zbt-we1026-5g-16m)
+	ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
+	set_wifi_led "we1026-5g:green:wifi"
+	;;
 zbtlink,zbt-we1226)
 	set_wifi_led "$boardname:green:wlan"
 	ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -451,7 +451,7 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
 		;;
 	sparklan,wcr-150gn|\
-	zbtlink,we1026-5g-16m)
+	zbtlink,zbt-we1026-5g-16m)
 		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
 		;;

target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026-5g-16m.dts

@@ -33,10 +33,10 @@
 
 /dts-v1/;
 
-#include "mt7620a_zbtlink_we1026-5g.dtsi"
+#include "mt7620a_zbtlink_zbt-we1026-5g.dtsi"
 
 / {
-	compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc";
+	compatible = "zbtlink,zbt-we1026-5g-16m", "ralink,mt7620a-soc";
 	model = "Zbtlink ZBT-WE1026-5G (16M)";
 };
 

target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026-5g.dtsi

@@ -37,7 +37,7 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc";
+	compatible = "zbtlink,zbt-we1026-5g", "ralink,mt7620a-soc";
 
 	chosen {
 		bootargs = "console=ttyS0,115200";

target/linux/ramips/image/mt7620.mk

@@ -943,17 +943,6 @@ define Device/yukai_bocco
 endef
 TARGET_DEVICES += yukai_bocco
 
-define Device/zbtlink_we1026-5g-16m
-  MTK_SOC := mt7620a
-  IMAGE_SIZE := 16064k
-  DEVICE_VENDOR := Zbtlink
-  DEVICE_MODEL := ZBT-WE1026-5G
-  DEVICE_VARIANT := 16M
-  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
-  SUPPORTED_DEVICES += we1026-5g-16m
-endef
-TARGET_DEVICES += zbtlink_we1026-5g-16m
-
 define Device/zbtlink_zbt-ape522ii
   MTK_SOC := mt7620a
   IMAGE_SIZE := 15872k
@@ -984,6 +973,17 @@ define Device/zbtlink_zbt-wa05
 endef
 TARGET_DEVICES += zbtlink_zbt-wa05
 
+define Device/zbtlink_zbt-we1026-5g-16m
+  MTK_SOC := mt7620a
+  IMAGE_SIZE := 16064k
+  DEVICE_VENDOR := Zbtlink
+  DEVICE_MODEL := ZBT-WE1026-5G
+  DEVICE_VARIANT := 16M
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
+  SUPPORTED_DEVICES += we1026-5g-16m zbtlink,we1026-5g-16m
+endef
+TARGET_DEVICES += zbtlink_zbt-we1026-5g-16m
+
 define Device/zbtlink_zbt-we2026
   MTK_SOC := mt7620n
   IMAGE_SIZE := 7552k