diff --git a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch new file mode 100644 index 0000000000..e2c8980a43 --- /dev/null +++ b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch @@ -0,0 +1,66 @@ +From 66d19a4f8d0fa7539f90cad64d793b4dac6f6e5d Mon Sep 17 00:00:00 2001 +From: Robert Jones +Date: Fri, 14 Feb 2020 13:01:55 -0800 +Subject: [PATCH] ARM: dts: imx: ventana: add fxos8700 on gateworks boards + +Add fxos8700 iio imu entries for Gateworks ventana SBCs. + +Signed-off-by: Robert Jones +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 5 +++++ + arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 +++++ + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 +++++ + 3 files changed, 15 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +index 1a9a9d9..60563ff 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +@@ -313,6 +313,11 @@ + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + }; ++ ++ accel@1e { ++ compatible = "nxp,fxos8700"; ++ reg = <0x1e>; ++ }; + }; + + &ldb { +diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +index 54b2bea..8942bec 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +@@ -304,6 +304,11 @@ + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; ++ ++ accel@1e { ++ compatible = "nxp,fxos8700"; ++ reg = <0x1e>; ++ }; + }; + + &ldb { +diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +index 1b6c133..c40583d 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +@@ -361,6 +361,11 @@ + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + }; ++ ++ accel@1e { ++ compatible = "nxp,fxos8700"; ++ reg = <0x1e>; ++ }; + }; + + &ldb { +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch new file mode 100644 index 0000000000..5f5dc0aed1 --- /dev/null +++ b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch @@ -0,0 +1,59 @@ +From d2cf2f91ba5b6d7696b1870e28017a3e1a7a1bb8 Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Fri, 28 Feb 2020 11:46:07 -0800 +Subject: [PATCH] ARM: dts: imx6qdl-gw5910: add CC1352 UART + +The GW5910-C revision adds a TI CC1352 connected to IMX UART4 + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +index be1af74..30fe47f 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +@@ -220,6 +220,14 @@ + status = "okay"; + }; + ++/* cc1352 */ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart3>; ++ uart-has-rtscts; ++ status = "okay"; ++}; ++ + /* Sterling-LWB Bluetooth */ + &uart4 { + pinctrl-names = "default"; +@@ -411,6 +419,23 @@ + >; + }; + ++ pinctrl_uart3: uart3grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 ++ MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 ++ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ ++ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ ++ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ ++ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ ++ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ ++ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ ++ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ ++ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ ++ >; ++ }; ++ + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch b/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch new file mode 100644 index 0000000000..b0ac409f7e --- /dev/null +++ b/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch @@ -0,0 +1,50 @@ +From 957743b79b1ebb710f5498b61a212cebc302e685 Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Wed, 29 Apr 2020 08:22:35 -0700 +Subject: [PATCH 01/20] ARM: dts: imx6qdl-gw552x: add USB OTG support + +The GW552x-B board revision adds USB OTG support. + +Enable the device-tree node and configure the OTG_ID pin. + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +index dc646b7..bb35971 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +@@ -258,6 +258,14 @@ + status = "okay"; + }; + ++&usbotg { ++ vbus-supply = <®_5p0v>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ + &wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; +@@ -359,6 +367,12 @@ + >; + }; + ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 ++ >; ++ }; ++ + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch new file mode 100644 index 0000000000..cb8f17222a --- /dev/null +++ b/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch @@ -0,0 +1,81 @@ +From 9e72702a3d9a967edac02d8e937bce2b68b77814 Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Tue, 12 May 2020 13:59:37 -0700 +Subject: [PATCH 05/20] ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn + support + +Add one node for the accel/gyro i2c device and another for the separate +magnetometer device in the lsm9ds1. + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +index e8e36df..69ca70d 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +@@ -295,6 +295,15 @@ + VDDIO-supply = <®_3p3v>; + }; + ++ magn@1c { ++ compatible = "st,lsm9ds1-magn"; ++ reg = <0x1c>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_mag>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_RISING>; ++ }; ++ + tca8418: keypad@34 { + compatible = "ti,tca8418"; + pinctrl-names = "default"; +@@ -389,6 +398,16 @@ + }; + }; + }; ++ ++ imu@6a { ++ compatible = "st,lsm9ds1-imu"; ++ reg = <0x6a>; ++ st,drdy-int-pin = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_imu>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; ++ }; + }; + + &i2c3 { +@@ -609,6 +628,12 @@ + >; + }; + ++ pinctrl_imu: imugrp { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 ++ >; ++ }; ++ + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ +@@ -616,6 +641,12 @@ + >; + }; + ++ pinctrl_mag: maggrp { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 ++ >; ++ }; ++ + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch new file mode 100644 index 0000000000..9befdbe0a0 --- /dev/null +++ b/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch @@ -0,0 +1,74 @@ +From c8756cbad816954be912ba32277ccd55fe7acc01 Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Tue, 12 May 2020 13:59:56 -0700 +Subject: [PATCH 06/20] ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn + support + +Add one node for the accel/gyro i2c device and another for the separate +magnetometer device in the lsm9ds1. + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +index 6d21cc6..76d6cf5 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +@@ -248,6 +248,15 @@ + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + ++ magn@1c { ++ compatible = "st,lsm9ds1-magn"; ++ reg = <0x1c>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_mag>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <17 IRQ_TYPE_EDGE_RISING>; ++ }; ++ + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; +@@ -320,6 +329,16 @@ + }; + }; + }; ++ ++ imu@6a { ++ compatible = "st,lsm9ds1-imu"; ++ reg = <0x6a>; ++ st,drdy-int-pin = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_imu>; ++ interrupt-parent = <&gpio4>; ++ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; ++ }; + }; + + &i2c3 { +@@ -501,6 +520,18 @@ + >; + }; + ++ pinctrl_imu: imugrp { ++ fsl,pins = < ++ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 ++ >; ++ }; ++ ++ pinctrl_mag: maggrp { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 ++ >; ++ }; ++ + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch b/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch new file mode 100644 index 0000000000..ca11c5462a --- /dev/null +++ b/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch @@ -0,0 +1,87 @@ +From d40edafe80569c5b4d8893c1cdd1060c54ef433c Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Tue, 12 May 2020 14:54:15 -0700 +Subject: [PATCH 07/20] ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt + +The Sterling-LWB has a BCM4330 which has a UART based bluetooth +HCI. Add support for binding to the bcm_hci driver to take care +of handling the shutdown gpio and loading firmware. + +Because the shutdown gpio is more of an enable than a regulator +go ahead and replace the regulator with a shutdown-gpio. + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 32 ++++++++++++-------------------- + 1 file changed, 12 insertions(+), 20 deletions(-) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +index 30fe47f..b850f8f 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +@@ -83,19 +83,6 @@ + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +- +- reg_bt: regulator-bt { +- pinctrl-names = "default"; +- pinctrl-0 = <&pinctrl_reg_bt>; +- compatible = "regulator-fixed"; +- regulator-name = "bt"; +- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; +- startup-delay-us = <100>; +- enable-active-high; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-always-on; +- }; + }; + + +@@ -231,9 +218,14 @@ + /* Sterling-LWB Bluetooth */ + &uart4 { + pinctrl-names = "default"; +- pinctrl-0 = <&pinctrl_uart4>; ++ pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; + uart-has-rtscts; + status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm4330-bt"; ++ shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; ++ }; + }; + + /* GPS */ +@@ -288,6 +280,12 @@ + >; + }; + ++ pinctrl_bten: btengrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 ++ >; ++ }; ++ + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 +@@ -393,12 +391,6 @@ + >; + }; + +- pinctrl_reg_bt: regbtgrp { +- fsl,pins = < +- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 +- >; +- }; +- + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 +-- +2.7.4 + diff --git a/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch b/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch new file mode 100644 index 0000000000..8a9158ae00 --- /dev/null +++ b/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch @@ -0,0 +1,38 @@ +From 4792ff641cc8993606013d27d84cda59d8cc76c5 Mon Sep 17 00:00:00 2001 +From: Tim Harvey +Date: Tue, 12 May 2020 15:02:34 -0700 +Subject: [PATCH 08/20] ARM: dts: imx6qdl-gw5910: fix wlan regulator + +Connect the wl_reg regulator to usdhc2 such that it can be enabled +and disabled as needed. There is no need for this to be always-on. + +Signed-off-by: Tim Harvey +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +index b850f8f..0857de5 100644 +--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +@@ -81,7 +81,6 @@ + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +- regulator-always-on; + }; + }; + +@@ -251,7 +250,7 @@ + &usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; +- vmmc-supply = <®_3p3v>; ++ vmmc-supply = <®_wl>; + non-removable; + bus-width = <4>; + status = "okay"; +-- +2.7.4 +