ar71xx: use routerboot_find_tag to find wlan data offset on RB751

SVN-Revision: 33348
v19.07.3_mercusys_ac12_duma
Gabor Juhos 12 years ago
parent ccabe4a1b4
commit 3686e18727

@ -83,7 +83,7 @@ CONFIG_ATH79_MACH_WZR_HP_G450H=y
CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
# CONFIG_ATH79_ROUTERBOOT is not set
CONFIG_ATH79_ROUTERBOOT=y
# CONFIG_ATH79_WDT is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y

@ -15,6 +15,7 @@
#include <linux/phy.h>
#include <linux/ar8216_platform.h>
#include <linux/rle.h>
#include <linux/routerboot.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
@ -26,6 +27,7 @@
#include "dev-usb.h"
#include "dev-eth.h"
#include "machtypes.h"
#include "routerboot.h"
static struct rb750_led_data rb750_leds[] = {
{
@ -277,15 +279,16 @@ static void __init rb750gr3_setup(void)
MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
rb750gr3_setup);
#define RB751_HARDCONFIG 0x1f00b000
#define RB751_HARDCONFIG 0x1f00b000
#define RB751_HARDCONFIG_SIZE 0x1000
#define RB751_MAC_ADDRESS_OFFSET 0xE80
#define RB751_CALDATA_OFFSET 0x27C
#define RB751_CALDATA_SIZE 0xc00
static void __init rb751_wlan_setup(void)
{
u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
struct ath9k_platform_data *wmac_data;
u16 tag_len;
u8 *tag;
int err;
wmac_data = ap9x_pci_get_wmac_data(0);
@ -296,11 +299,15 @@ static void __init rb751_wlan_setup(void)
ap9x_pci_setup_wmac_led_pin(0, 9);
err = rle_decode(hardconfig + RB751_CALDATA_OFFSET,
RB751_CALDATA_SIZE,
(unsigned char *) wmac_data->eeprom_data,
sizeof(wmac_data->eeprom_data),
NULL, NULL);
err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
RB_ID_WLAN_DATA, &tag, &tag_len);
if (err) {
pr_err("rb75x: no calibration data found\n");
return;
}
err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
sizeof(wmac_data->eeprom_data), NULL, NULL);
if (err) {
pr_err("rb75x: unable to decode wlan eeprom data\n");
return;

@ -189,7 +189,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -66,6 +137,428 @@ config ATH79_MACH_PB44
@@ -66,6 +137,429 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@ -379,6 +379,7 @@
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+ select RLE_DECOMPRESS
+
+config ATH79_MACH_WNDR3700
@ -618,7 +619,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
@@ -79,6 +572,24 @@ config ATH79_MACH_UBNT_XM
@@ -79,6 +573,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -643,7 +644,7 @@
endmenu
config SOC_AR71XX
@@ -114,10 +625,6 @@ config SOC_QCA955X
@@ -114,10 +626,6 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
@ -654,7 +655,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -128,7 +635,14 @@ config ATH79_DEV_DSA
@@ -128,7 +636,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -670,7 +671,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -156,4 +670,7 @@ config ATH79_PCI_ATH9K_FIXUP
@@ -156,4 +671,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -550,6 +550,16 @@ config ATH79_MACH_TEW_673GRU
@@ -551,6 +551,16 @@ config ATH79_MACH_TEW_673GRU
select ATH79_DEV_USB
select ATH79_NVRAM

@ -1,7 +1,7 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -334,6 +334,11 @@ config ATH79_MACH_RB750
select ATH79_DEV_USB
@@ -335,6 +335,11 @@ config ATH79_MACH_RB750
select ATH79_ROUTERBOOT
select RLE_DECOMPRESS
+config ATH79_MACH_RB2011

Loading…
Cancel
Save