ramips: various fixes for zbt-we1226

Convert userspace code to use generic device-tree compatible board
detection method.  Users of the existing code will have to use
sysupgrade -F once to switch to the new generic board naming.
Properly setup pinctrl fixing the switch port LEDs.

Fixes commit 9c4fe103cb (ramips: add support for ZBT-WE1226)
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -491,7 +491,7 @@ zbt-we826-32M)
 	set_wifi_led "zbt-we826:green:wifi"
 	set_usb_led "zbt-we826:green:usb"
 	;;
-zbt-we1226)
+zbtlink,zbt-we1226)
 	set_wifi_led "$boardname:green:wlan"
 	ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
 	ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -350,7 +350,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "0:wan" "6@eth0"
 		;;
-	zbt-we1226|\
+	zbtlink,zbt-we1226|\
 	y1)
 		ucidef_add_switch "switch0" \
 			"0:lan:2" "1:lan:1" "4:wan" "6@eth0"

target/linux/ramips/base-files/etc/diag.sh

@@ -315,8 +315,8 @@ get_status_led() {
 	zbt-we826-32M)
 		status_led="zbt-we826:green:power"
 		;;
-	zbt-we1226)
-		status_led="zbt-we1226:green:wlan"
+	zbtlink,zbt-we1226)
+		status_led="$boardname:green:wlan"
 		;;
 	zbt-wg3526-16M|\
 	zbt-wg3526-32M)

target/linux/ramips/base-files/lib/ramips.sh

@@ -685,9 +685,6 @@ ramips_board_detect() {
 	*"ZBT-WA05")
 		name="zbt-wa05"
 		;;
-	*"ZBT-WE1226")
-		name="zbt-we1226"
-		;;
 	*"ZBT-WE1326")
 		name="zbt-we1326"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -204,7 +204,7 @@ platform_check_image() {
 	zbt-ape522ii|\
 	zbt-cpe102|\
 	zbt-wa05|\
-	zbt-we1226|\
+	zbtlink,zbt-we1226|\
 	zbt-we1326|\
 	zbt-we2026|\
 	zbtlink,zbt-we3526|\

target/linux/ramips/dts/ZBT-WE1226.dts

@@ -5,7 +5,7 @@
 #include "mt7628an.dtsi"
 
 / {
-	compatible = "zbt,we1226", "mediatek,mt7628an-soc";
+	compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
 	model = "Zbtlink ZBT-WE1226";
 
 	chosen {
@@ -33,19 +33,19 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		lan2 {
-			label = "zbt-we1226:green:lan2";
+		wan {
+			label = "zbt-we1226:green:wan";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
 		lan1 {
 			label = "zbt-we1226:green:lan1";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
-			label = "zbt-we1226:green:wan";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		lan2 {
+			label = "zbt-we1226:green:lan2";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan {
@@ -58,7 +58,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
-			ralink,group = "i2c", "wled_an";
+			ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
 			ralink,function = "gpio";
 		};
 	};

target/linux/ramips/image/mt76x8.mk

@@ -248,9 +248,9 @@ define Device/wrtnode2r
 endef
 TARGET_DEVICES += wrtnode2r
 
-define Device/zbt-we1226
+define Device/zbtlink_zbt-we1226
   DTS := ZBT-WE1226
   IMAGE_SIZE := $(ralink_default_fw_size_8M)
   DEVICE_TITLE := ZBTlink ZBT-WE1226
 endef
-TARGET_DEVICES += zbt-we1226
+TARGET_DEVICES += zbtlink_zbt-we1226