lantiq: dts: move partitions into partition node

Signed-off-by: Mathias Kresin <dev@kresin.me>

target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NOR.dts

@@ -17,22 +17,26 @@
 		compatible = "lantiq,nor";
 		bank-width = <2>;
 		reg = <0x0 0x4000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		partition@0 {
-			label = "uboot";
-			reg = <0x00000 0x40000>;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@10000 {
-			label = "uboot_env";
-			reg = <0x40000 0x40000>;
-		};
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x40000>;
+			};
+
+			partition@10000 {
+				label = "uboot_env";
+				reg = <0x40000 0x40000>;
+			};
 
-		partition@20000 {
-			label = "linux";
-			reg = <0x80000 0x3d0000>;
+			partition@20000 {
+				label = "linux";
+				reg = <0x80000 0x3d0000>;
+			};
 		};
 	};
 };

target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2.dtsi

@@ -261,28 +261,32 @@
 	pinctrl-0 = <&pins_spi_default>;
 
 	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <4>;
 		spi-max-frequency = <1000000>;
 
-		urlader: partition@0 {
-			reg = <0x0 0x20000>;
-			label = "urlader";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x10000>;
-			label = "tffs (1)";
-			read-only;
-		};
-
-		partition@30000 {
-			reg = <0x30000 0x10000>;
-			label = "tffs (2)";
-			read-only;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			urlader: partition@0 {
+				reg = <0x0 0x20000>;
+				label = "urlader";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x10000>;
+				label = "tffs (1)";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x30000 0x10000>;
+				label = "tffs (2)";
+				read-only;
+			};
 		};
 	};
 };

target/linux/lantiq/files/arch/mips/boot/dts/WBMR300.dts

@@ -264,49 +264,52 @@
 	pinctrl-0 = <&pins_spi_default>;
 
 	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <4>;
 		spi-max-frequency = <20000000>;
 
-		partition@0 {
-			reg = <0x0 0x10000>;
-			label = "u-boot";
-			read-only;
-		};
-
-		partition@10000 {
-			reg = <0x10000 0x10000>;
-			label = "gphyfirmware";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x80000>;
-			label = "dsl_fw";
-		};
-
-		partition@de0000 {
-			reg = <0xa0000 0xf40000>;
-			label = "firmware";
-		};
-
-		partition@fe0000 {
-			reg = <0xfe0000 0x10000>;
-			label = "sysconfig";
-			read-only;
-		};
-
-		partition@ff0000 {
-			reg = <0xff0000 0x2000>;
-			label = "ubootconfig";
-		};
-
-		partition@ff3000 {
-			reg = <0xff3000 0x2000>;
-			label = "board_config";
-			read-only;
+		partitions {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x10000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@10000 {
+				reg = <0x10000 0x10000>;
+				label = "gphyfirmware";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x80000>;
+				label = "dsl_fw";
+			};
+
+			partition@de0000 {
+				reg = <0xa0000 0xf40000>;
+				label = "firmware";
+			};
+
+			partition@fe0000 {
+				reg = <0xfe0000 0x10000>;
+				label = "sysconfig";
+				read-only;
+			};
+
+			partition@ff0000 {
+				reg = <0xff0000 0x2000>;
+				label = "ubootconfig";
+			};
+
+			partition@ff3000 {
+				reg = <0xff3000 0x2000>;
+				label = "board_config";
+				read-only;
+			};
 		};
 	};
 };

target/linux/lantiq/files/arch/mips/boot/dts/falcon-sflash-16M.dtsi

@@ -5,33 +5,37 @@
 	compatible = "lantiq,sflash-falcon", "simple-bus";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
 		reg = <0 0>;
 		linux,mtd-name = "sflash";
 		spi-max-frequency = <80000000>;
 		m25p,fast-read;
 
-		partition@0 {
-			reg = <0x0 0x40000>;
-			label = "uboot";
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@40000 {
-			reg = <0x40000 0x80000>;
-			label = "uboot_env";
-		};
+			partition@0 {
+				reg = <0x0 0x40000>;
+				label = "uboot";
+				read-only;
+			};
 
-		partition@C0000 {
-			reg = <0xC0000 0x740000>;
-			label = "image0";
-		};
+			partition@40000 {
+				reg = <0x40000 0x80000>;
+				label = "uboot_env";
+			};
+
+			partition@C0000 {
+				reg = <0xC0000 0x740000>;
+				label = "image0";
+			};
 
-		partition@800000 {
-			reg = <0x800000 0x800000>;
-			label = "image1";
+			partition@800000 {
+				reg = <0x800000 0x800000>;
+				label = "image1";
+			};
 		};
 	};
 };