ramips: add support for JCG JHR-AC876M

JCG JHR-AC876M is an AC2600M router

Hardware specs:
  SoC: MT7621AT
  2.4GHz: MT7615N 4x4 @ PCIe0
  5GHz: MT7615N 4x4 @ PCIe1
  Flash: Winbond W25Q128JVSQ 16MiB
  RAM: Nanya NT5CB128M16 256MiB
  USB 2.0 and 3.0 ports
  6 LEDs, 3 of which are connected to SoC GPIO
  Reset and WPS buttons

Flash instructions:
Stock to OpenWrt:
  Upload factory.bin in stock firmware's upgrade page,
  do not preserve settings

OpenWrt to stock:
  Push and hold the reset button for 5s while power cycling to
  enter recovery mode;
  Visit 192.168.1.1 and upload stock firmware

MAC addresses map:
  0x0004  *:1c  wlan2g/wan/label
  0x8004  *:20  wlan5g
  0xe000  *:1b  lan
  0xe006  *:1a  not used in stock fw

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
master
DENG Qingfang 4 years ago committed by Adrian Schmutzler
parent 0bf4d681d4
commit 1b7199c90c

@ -0,0 +1,144 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "jcg,jhr-ac876m", "mediatek,mt7621-soc";
model = "JCG JHR-AC876M";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
chosen {
bootargs = "console=ttyS0,57600";
};
leds {
compatible = "gpio-leds";
usb3 {
label = "jhr-ac876m:blue:usb3";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>;
linux,default-trigger = "usbport";
};
usb2 {
label = "jhr-ac876m:blue:usb2";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port2>;
linux,default-trigger = "usbport";
};
led_wps: wps {
label = "jhr-ac876m:blue:wps";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
led {
led-active-low;
};
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
led {
led-active-low;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&state_default {
gpio {
ralink,group = "i2c", "uart3", "jtag", "wdt";
ralink,function = "gpio";
};
};

@ -371,6 +371,19 @@ define Device/iptime_a6ns-m
endef
TARGET_DEVICES += iptime_a6ns-m
define Device/jcg_jhr-ac876m
MTK_SOC := mt7621
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 89.1
JCG_MAXSIZE := 16064k
DEVICE_VENDOR := JCG
DEVICE_MODEL := JHR-AC876M
DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += jcg_jhr-ac876m
define Device/lenovo_newifi-d1
MTK_SOC := mt7621
IMAGE_SIZE := 32448k

@ -14,6 +14,7 @@ ramips_setup_interfaces()
d-team,pbr-m1|\
firefly,firewrt|\
hiwifi,hc5962|\
jcg,jhr-ac876m|\
mediatek,ap-mt7621a-v60|\
mediatek,mt7621-eval-board|\
mqmaker,witi|\
@ -222,6 +223,10 @@ ramips_setup_macs()
iptime,a6ns-m)
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
;;
jcg,jhr-ac876m)
label_mac=$(mtd_get_mac_binary factory 0x4)
wan_mac=$label_mac
;;
mediatek,ap-mt7621a-v60)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x5)" 1)
;;

Loading…
Cancel
Save