dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ramips: Add support for 8devices Carambola dev board.

Browse Source 
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
v19.07.3_mercusys_ac12_duma
Gabor Juhos 12 years ago
parent bb0785880a
commit 1617f226a9
11 changed files with 62 additions and 0 deletions
Show Stats Download Patch File Download Diff File

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
Unescape Escape View File

@ -58,6 +58,7 @@ case "$FIRMWARE" in
all5002 | \
argus-atp52b | \
bc2 | \
carambola | \
dir-615-h1 | \
dir-620-a1 | \
esr-9753 | \

1
target/linux/ramips/base-files/etc/uci-defaults/network
Unescape Escape View File

@ -178,6 +178,7 @@ ramips_setup_macs()
;;
all0239-3g | \
carambola | \
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)

1
target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
Unescape Escape View File

@ -37,6 +37,7 @@ preinit_set_mac_address() {
all0239-3g |\
all0256n |\
all5002 |\
carambola |\
dir-615-h1 |\
fonera20n |\
hw550-3g |\

3
target/linux/ramips/base-files/lib/ramips.sh
Unescape Escape View File

@ -47,6 +47,9 @@ ramips_board_name() {
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
case "$machine" in
*"8devices Carambola")
name="carambola"
;;
*"Edimax 3g-6200n")
name="3g-6200n"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
Unescape Escape View File

@ -19,6 +19,7 @@ platform_check_image() {
all0256n | \
all5002 | \
bc2 | \
carambola | \
dir-300-b1 | \
dir-600-b1 | \
dir-600-b2 | \

1
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
Unescape Escape View File

@ -23,6 +23,7 @@ enum ramips_mach_type {
/* RT3050 based machines */
RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */
RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */
RAMIPS_MACH_CARAMBOLA, /* 8devices Carambola */
RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */

5
target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
Unescape Escape View File

@ -2,6 +2,11 @@ if RALINK_RT305X
menu "Ralink RT350x machine selection"
config RT305X_MACH_CARAMBOLA
bool "8devices Carambola dev board support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_3G_6200N
bool "Edimax 3G-6200N board support"
select RALINK_DEV_GPIO_BUTTONS

1
target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
Unescape Escape View File

@ -16,6 +16,7 @@ obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o
obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o
obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o
obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o

42
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c
Unescape Escape View File

@ -0,0 +1,42 @@
/*
* 8devices Carambola dev board support
*
* Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
static void __init carambola_init(void)
{
/* Ugh, inverted logic...
* This actually puts the pins into GPIO mode rather I2C, SPI, ... */
rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) |
RT305X_GPIO_MODE_I2C |
RT305X_GPIO_MODE_SPI |
RT305X_GPIO_MODE_JTAG |
RT305X_GPIO_MODE_MDIO);
rt305x_register_flash(0);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola",
carambola_init);

5
target/linux/ramips/image/Makefile
Unescape Escape View File

@ -403,6 +403,10 @@ define Image/Build/Profile/BC2
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
endef
define Image/Build/Profile/CARAMBOLA
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,carambola,CARAMBOLA,ttyS1,115200,phys)
endef
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
@ -538,6 +542,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ALL5002,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/CARAMBOLA,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/DIR615H1,$(1))
$(call Image/Build/Profile/DAP1350,$(1))

1
target/linux/ramips/rt305x/config-3.3
Unescape Escape View File

@ -92,6 +92,7 @@ CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RT305X_MACH_ALL5002=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
CONFIG_RT305X_MACH_BC2=y
CONFIG_RT305X_MACH_CARAMBOLA=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
CONFIG_RT305X_MACH_DIR_615_H1=y
CONFIG_RT305X_MACH_DAP_1350=y

Write Preview
Loading…
Cancel
Save