ipq40xx: integrate ath10kcal_patch_mac into ath10kcal_patch_mac_crc

In the thread: "ipq806x: add ath10k calibration data MAC addresses patching"
Chuanhong Guo <gch981213@gmail.com> noted that:
"All ath10k calibration data have a checksum at 0x2.
ath10kcal_patch_mac works for QCA9880/QCA9882 only because
the ath10k firmware for these two chips doesn't check the
checksum value. (QCA proprietary driver checks this and
refuses to use caldata with incorrect checksum.)"

This patch updates 11-ath10k-caldata of the ipq40xx target accordingly.

Reported-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -53,14 +53,6 @@ ath10kcal_ubi_extract() {
 		ath10kcal_die "failed to extract from $ubi"
 }
 
-ath10kcal_patch_mac() {
-	local mac=$1
-
-	[ -z "$mac" ] && return
-
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
-
 ath10kcal_patch_mac_crc() {
 	local mac=$1
 	local mac_offset=6
@@ -69,19 +61,21 @@ ath10kcal_patch_mac_crc() {
 	local xor_fw_mac
 	local xor_fw_chksum
 
+	[ -z "$mac" ] && return
+
 	xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
 	xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
 
-	ath10kcal_patch_mac "$mac" && {
-		xor_mac=${mac//:/}
-		xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+
+	xor_mac=${mac//:/}
+	xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
 
-		xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
-		xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+	xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+	xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
 
-		printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
-			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
-	}
+	printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+		dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
 }
 
 ath10kcal_is_caldata_valid() {
@@ -106,7 +100,7 @@ case "$FIRMWARE" in
 	meraki,mr33)
 		ath10kcal_ubi_extract "ART" 36864 2116
 		ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
-		ath10kcal_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
 		;;
 	esac
 	;;