brcm47xx: remove kernel 2.6.33

SVN-Revision: 22295
v19.07.3_mercusys_ac12_duma
Hauke Mehrtens 14 years ago
parent d82495ee60
commit 0799e77a8b

@ -1,178 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
# CONFIG_AR7 is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARPD is not set
CONFIG_B44=y
CONFIG_B44_PCI=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_BCM47XX=y
CONFIG_BCM47XX_WDT=y
# CONFIG_BCM63XX is not set
CONFIG_BITREVERSE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_BUG is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CFE=y
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_FSNOTIFY is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAMRADIO is not set
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IRQ_CPU=y
CONFIG_LEDS_GPIO=y
CONFIG_LOONGSON_UART_BASE=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_LOONGSON is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIKROTIK_RB532 is not set
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_BCM47XX=y
CONFIG_NO_HZ=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_POWERTV is not set
# CONFIG_PROC_KCORE is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SPROM=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_USB_SUPPORT=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_ZONE_DMA_FLAG=0

@ -1,25 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -325,6 +325,12 @@ config MTD_CFI_FLAGADM
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
+config MTD_BCM47XX
+ tristate "BCM47xx flash device"
+ depends on MIPS && MTD_CFI && BCM47XX
+ help
+ Support for the flash chips on the BCM947xx board.
+
config MTD_REDWOOD
tristate "CFI Flash devices mapped on IBM Redwood"
depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcms
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o

@ -1,89 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -205,7 +205,6 @@ config MIPS_MALTA
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
- select MIPS_CPU_SCACHE
select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
@@ -1561,13 +1560,6 @@ config IP22_CPU_SCACHE
bool
select BOARD_SCACHE
-#
-# Support for a MIPS32 / MIPS64 style S-caches
-#
-config MIPS_CPU_SCACHE
- bool
- select BOARD_SCACHE
-
config R5000_CPU_SCACHE
bool
select BOARD_SCACHE
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -759,6 +759,8 @@ static inline void cpu_probe_mips(struct
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
__cpu_name[cpu] = "MIPS 25Kc";
+ /* Probe for L2 cache */
+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -33,6 +33,5 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-oct
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
-obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
EXTRA_CFLAGS += -Werror
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1148,7 +1148,6 @@ static void __init loongson2_sc_init(voi
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
-extern int mips_sc_init(void);
static void __cpuinit setup_scache(void)
{
@@ -1202,29 +1201,17 @@ static void __cpuinit setup_scache(void)
#endif
default:
- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M32R2 ||
- c->isa_level == MIPS_CPU_ISA_M64R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R2) {
-#ifdef CONFIG_MIPS_CPU_SCACHE
- if (mips_sc_init ()) {
- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
- scache_size >> 10,
- way_string[c->scache.ways], c->scache.linesz);
- }
-#else
- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
- panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-#endif
- return;
- }
sc_present = 0;
}
if (!sc_present)
return;
+ if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
+ c->isa_level == MIPS_CPU_ISA_M64R1) &&
+ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
+
/* compute a couple of other cache variables */
c->scache.waysize = scache_size / c->scache.ways;

@ -1,367 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -17,6 +17,20 @@
#include <asm/cpu-features.h>
#include <asm/mipsmtregs.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+
+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Invalidate_I, addr);
}
@@ -219,6 +237,7 @@ static inline void protected_flush_icach
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
static inline void blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
+ \
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
unsigned long addr = start & ~(lsize - 1); \
unsigned long aend = (end - 1) & ~(lsize - 1); \
+ war \
\
__##pfx##flush_prologue \
\
while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -430,6 +430,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set mips0
.endm
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -35,6 +35,9 @@
#include <asm/cacheflush.h> /* for run_uncached() */
+/* For enabling BCM4710 cache workarounds */
+int bcm4710 = 0;
+
/*
* Special Variant of smp_call_function for use by cache functions:
*
@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -680,6 +692,8 @@ static void local_r4k_flush_cache_sigtra
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
+ BCM4710_PROTECTED_FILL_TLB(addr);
+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
@@ -1298,6 +1312,17 @@ static void __cpuinit coherency_setup(vo
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BCM3302:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1354,6 +1379,15 @@ void __cpuinit r4k_cache_init(void)
break;
}
+ /* Check if special workarounds are required */
+#ifdef CONFIG_BCM47XX
+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
setup_scache();
@@ -1412,5 +1446,13 @@ void __cpuinit r4k_cache_init(void)
#if !defined(CONFIG_MIPS_CMP)
local_r4k___flush_cache_all(NULL);
#endif
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -749,6 +749,9 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
@@ -1203,6 +1206,9 @@ build_r4000_tlbchange_handler_head(u32 *
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else

@ -1,77 +0,0 @@
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -107,6 +107,9 @@
#ifndef cpu_has_pindexed_dcache
#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_use_kmap_coherent 0
+
+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapped(page) && !Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page, KM_USER0);
@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr, KM_USER0);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -209,7 +209,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to, KM_USER1);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -231,7 +231,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -249,7 +249,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

@ -1,45 +0,0 @@
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -126,6 +126,7 @@ static __init void prom_init_cmdline(voi
static __init void prom_init_mem(void)
{
unsigned long mem;
+ unsigned long max;
/* Figure out memory size by finding aliases.
*
@@ -134,21 +135,26 @@ static __init void prom_init_mem(void)
* want to reuse the memory used by CFE (around 4MB). That means cfe_*
* functions stop to work at some point during the boot, we should only
* call them at the beginning of the boot.
+ *
+ * BCM47XX uses 128MB for addressing the ram, if the system contains
+ * less that that amount of ram it remaps the ram more often into the
+ * available space.
+ * Accessing memory after 128MB will cause an exception.
+ * max contains the biggest possible address supported by the platform.
+ * If the method wants to try something above we assume 128MB ram.
*/
+ max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
+ if (((unsigned long)(prom_init) + mem) > max) {
+ mem = (128 << 20);
+ printk("assume 128MB RAM\n");
+ break;
+ }
if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
*(unsigned long *)(prom_init))
break;
}
- /* Ignoring the last page when ddr size is 128M. Cached
- * accesses to last page is causing the processor to prefetch
- * using address above 128M stepping out of the ddr address
- * space.
- */
- if (mem == 0x8000000)
- mem -= 0x1000;
-
add_memory_region(0, mem, BOOT_MEM_RAM);
}

@ -1,86 +0,0 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -339,7 +339,7 @@ static int b44_phy_reset(struct b44 *bp)
}
}
- return 0;
+ return err;
}
static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
+#ifdef CONFIG_SSB_DRIVER_MIPS
extern char *nvram_get(char *name);
static void b44_wap54g10_workaround(struct b44 *bp)
{
@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
}
#endif
+#ifdef CONFIG_SSB_DRIVER_MIPS
+static inline int startswith (const char *source, const char *cmp)
+{
+ return !strncmp(source,cmp,strlen(cmp));
+}
+
+#define getvar(str) (nvram_get(str) ? : "")
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ } else {
+ /* WL-HDD */
+ struct ssb_device *sdev = bp->sdev;
+ if (startswith(getvar("hardware_version"), "WL300-"))
+ {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ }
+ }
+ return;
+}
+
+#else
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
+#endif
+
static int b44_setup_phy(struct b44 *bp)
{
u32 val;
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
return 0;
@@ -2094,6 +2127,8 @@ static int __devinit b44_get_invariants(
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
@@ -2223,6 +2258,10 @@ static int __devinit b44_init_one(struct
*/
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
+ /* do a phy reset to test if there is an active phy */
+ if (b44_phy_reset(bp) < 0)
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+
printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
dev->name, dev->dev_addr);

@ -1,17 +0,0 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -189,11 +189,13 @@ static int b44_wait_bit(struct b44 *bp,
udelay(10);
}
if (i == timeout) {
- printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
+#if 0
+ printk(KERN_DEBUG PFX "%s: BUG! Timeout waiting for bit %08x of register "
"%lx to %s.\n",
bp->dev->name,
bit, reg,
(clear ? "clear" : "set"));
+#endif
return -ENODEV;
}
return 0;

@ -1,42 +0,0 @@
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
+ return;
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
+ return;
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -217,6 +217,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
rate = 200000000;
+ } else if (bus->chip_id == 0x5354) {
+ rate = 240000000;
} else {
rate = ssb_calc_clock_rate(pll_type, n, m);
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1072,6 +1072,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
if (bus->chip_id == 0x5365) {
rate = 100000000;
+ } else if (bus->chip_id == 0x5354) {
+ rate = 120000000;
} else {
rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */

@ -1,60 +0,0 @@
---
drivers/usb/host/ohci-ssb.c | 39 ++++++++++++++++++++++++++++++++++++---
1 file changed, 36 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de
int err = -ENOMEM;
u32 tmp, flags = 0;
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+ /* Put the device into host-mode. */
flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-
- ssb_device_enable(dev, flags);
+ ssb_device_enable(dev, flags);
+ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+ /*
+ * USB 2.0 special considerations:
+ *
+ * 1. Since the core supports both OHCI and EHCI functions, it must
+ * only be reset once.
+ *
+ * 2. In addition to the standard SSB reset sequence, the Host Control
+ * Register must be programmed to bring the USB core and various
+ * phy components out of reset.
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
+ udelay(1);
+ if (dev->id.revision == 1) { // bug in rev 1
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+ printk("USB20H fcr: 0x%0x\n", tmp);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+ printk("USB20H shim: 0x%0x\n", tmp);
+ }
+ } else
+ ssb_device_enable(dev, 0);
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev_name(dev->dev));
@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

@ -1,16 +0,0 @@
---
drivers/usb/host/ohci-ssb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -106,6 +106,9 @@ static int ssb_ohci_attach(struct ssb_de
int err = -ENOMEM;
u32 tmp, flags = 0;
+ if (ssb_dma_set_mask(dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
/* Put the device into host-mode. */
flags |= SSB_OHCI_TMSLOW_HOSTMODE;

@ -1,271 +0,0 @@
---
drivers/usb/host/Kconfig | 13 ++
drivers/usb/host/ehci-hcd.c | 12 ++
drivers/usb/host/ehci-ssb.c | 201 ++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/host/ohci-ssb.c | 23 +++++
4 files changed, 247 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,6 +150,19 @@ config USB_OXU210HP_HCD
To compile this driver as a module, choose M here: the
module will be called oxu210hp-hcd.
+config USB_EHCI_HCD_SSB
+ bool "EHCI support for Broadcom SSB EHCI core"
+ depends on USB_EHCI_HCD && SSB && EXPERIMENTAL
+ default n
+ ---help---
+ Support for the Sonics Silicon Backplane (SSB) attached
+ Broadcom USB EHCI core.
+
+ This device is present in some embedded devices with
+ Broadcom based SSB bus.
+
+ If unsure, say N.
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1159,8 +1159,16 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_atmel_driver
#endif
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+#include "ehci-ssb.c"
+#define SSB_EHCI_DRIVER ssb_ehci_driver
+#endif
+
+#if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(OF_PLATFORM_DRIVER) && \
+ !defined(SSB_EHCI_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
--- /dev/null
+++ b/drivers/usb/host/ehci-ssb.c
@@ -0,0 +1,158 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core EHCI driver (SSB bus glue)
+ *
+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
+ *
+ * Derived from the OHCI-SSB driver
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the EHCI-PCI driver
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+
+struct ssb_ehci_device {
+ struct ehci_hcd ehci; /* _must_ be at the beginning. */
+
+ u32 enable_flags;
+};
+
+static inline
+struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
+{
+ return (struct ssb_ehci_device *)(hcd->hcd_priv);
+}
+
+static int ssb_ehci_reset(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int err;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ err = ehci_halt(ehci);
+
+ if (err)
+ return err;
+
+ err = ehci_init(hcd);
+
+ if (err)
+ return err;
+
+ ehci_reset(ehci);
+
+ return err;
+}
+
+static const struct hc_driver ssb_ehci_hc_driver = {
+ .description = "ssb-usb-ehci",
+ .product_desc = "SSB EHCI Controller",
+ .hcd_priv_size = sizeof(struct ssb_ehci_device),
+
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .reset = ssb_ehci_reset,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ .get_frame_number = ehci_get_frame,
+
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
+{
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+
+ usb_remove_hcd(hcd);
+
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ usb_put_hcd(hcd);
+}
+EXPORT_SYMBOL_GPL(ssb_ehci_detach);
+
+static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
+{
+ struct ssb_ehci_device *ehcidev;
+ struct usb_hcd *hcd;
+ int err = -ENOMEM;
+ u32 tmp, flags = 0;
+
+ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
+ dev_name(dev->dev));
+ if (!hcd)
+ goto err_dev_disable;
+
+ ehcidev = hcd_to_ssb_ehci(hcd);
+ ehcidev->enable_flags = flags;
+ tmp = ssb_read32(dev, SSB_ADMATCH0);
+ hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+ hcd->rsrc_len = 0x100; /* ehci reg block size */
+ /*
+ * start & size modified per sbutils.c
+ */
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs)
+ goto err_put_hcd;
+ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED | IRQF_DISABLED);
+ if (err)
+ goto err_iounmap;
+
+ *ehci_hcd = hcd;
+
+ return err;
+
+err_iounmap:
+ iounmap(hcd->regs);
+err_put_hcd:
+ usb_put_hcd(hcd);
+err_dev_disable:
+ ssb_device_disable(dev, flags);
+ return err;
+}
+EXPORT_SYMBOL_GPL(ssb_ehci_attach);
+
+static const struct ssb_device_id ssb_ehci_table[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -17,6 +17,8 @@
*/
#include <linux/ssb/ssb.h>
+extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
+extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
@@ -24,6 +26,7 @@ struct ssb_ohci_device {
struct ohci_hcd ohci; /* _must_ be at the beginning. */
u32 enable_flags;
+ struct usb_hcd *ehci_hcd;
};
static inline
@@ -92,13 +95,25 @@ static const struct hc_driver ssb_ohci_h
static void ssb_ohci_detach(struct ssb_device *dev)
{
struct usb_hcd *hcd = ssb_get_drvdata(dev);
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+#endif
usb_remove_hcd(hcd);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+ /*
+ * Also detach ehci function
+ */
+ if (dev->id.coreid == SSB_DEV_USB20_HOST)
+ ssb_ehci_detach(dev, ohcidev->ehci_hcd);
+#endif
ssb_device_disable(dev, 0);
}
+
static int ssb_ohci_attach(struct ssb_device *dev)
{
struct ssb_ohci_device *ohcidev;
@@ -165,6 +180,14 @@ static int ssb_ohci_attach(struct ssb_de
ssb_set_drvdata(dev, hcd);
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+ /*
+ * attach ehci function in this core
+ */
+ if (dev->id.coreid == SSB_DEV_USB20_HOST)
+ err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
+#endif
+
return err;
err_iounmap:

@ -1,63 +0,0 @@
This patch significantly improves the reliability of high speed
usb writes on the bcm5354. It implements a work around for version 2
of the usb20 core that was cribbed from the GPL sources for the
Asus wl500gpv2 and verified against the wl520gu sources.
Reference:
GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
Signed-off-by: Steve Brown <sbrown@cortland.com>
---
drivers/usb/host/ohci-ssb.c | 37 +++++++++++++++++++++++--------------
1 file changed, 23 insertions(+), 14 deletions(-)
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de
*/
ssb_device_enable(dev, 0);
ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+
udelay(1);
- if (dev->id.revision == 1) { // bug in rev 1
- /* Change Flush control reg */
- tmp = ssb_read32(dev, 0x400);
- tmp &= ~8;
- ssb_write32(dev, 0x400, tmp);
- tmp = ssb_read32(dev, 0x400);
- printk("USB20H fcr: 0x%0x\n", tmp);
-
- /* Change Shim control reg */
- tmp = ssb_read32(dev, 0x304);
- tmp &= ~0x100;
- ssb_write32(dev, 0x304, tmp);
- tmp = ssb_read32(dev, 0x304);
- printk("USB20H shim: 0x%0x\n", tmp);
+ /* Work around for 5354 failures */
+ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
+ /* Change syn01 reg */
+ tmp = 0x00fe00fe;
+ ssb_write32(dev, 0x894, tmp);
+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
}
} else
ssb_device_enable(dev, 0);

@ -1,16 +0,0 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -141,6 +141,8 @@ config SSB_DRIVER_MIPS
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS
+ select USB_EHCI_HCD_SSB if USB_EHCI_HCD
+ select USB_OHCI_HCD_SSB if USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

@ -1,31 +0,0 @@
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
}
}
-static void r4k___flush_cache_all(void)
+void r4k___flush_cache_all(void)
{
r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1);
}
@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
}
}
-static void r4k_flush_cache_page(struct vm_area_struct *vma,
+void r4k_flush_cache_page(struct vm_area_struct *vma,
unsigned long addr, unsigned long pfn)
{
struct flush_cache_page_args args;
@@ -1456,3 +1456,10 @@ void __cpuinit r4k_cache_init(void)
coherency_setup();
#endif
}
+
+// fuse package DCACHE BUG patch exports
+void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
+void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
+ unsigned long pfn) = r4k_flush_cache_page;
+EXPORT_SYMBOL(fuse_flush_cache_page);
+EXPORT_SYMBOL(fuse_flush_cache_all);

@ -1,82 +0,0 @@
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -533,6 +533,11 @@ static void fuse_copy_finish(struct fuse
}
}
+#ifdef DCACHE_BUG
+extern void (*fuse_flush_cache_all)(void);
+extern void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+#endif
+
/*
* Get another pagefull of userspace buffer, and map it to kernel
* address space, and lock request
@@ -541,6 +546,9 @@ static int fuse_copy_fill(struct fuse_co
{
unsigned long offset;
int err;
+#ifdef DCACHE_BUG
+ struct vm_area_struct *vma;
+#endif
unlock_request(cs->fc, cs->req);
fuse_copy_finish(cs);
@@ -552,14 +560,22 @@ static int fuse_copy_fill(struct fuse_co
cs->nr_segs--;
}
down_read(&current->mm->mmap_sem);
+#ifndef DCACHE_BUG
err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0,
&cs->pg, NULL);
+#else
+ err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0,
+ &cs->pg, &vma);
+#endif
up_read(&current->mm->mmap_sem);
if (err < 0)
return err;
BUG_ON(err != 1);
offset = cs->addr % PAGE_SIZE;
cs->mapaddr = kmap_atomic(cs->pg, KM_USER0);
+#ifdef DCACHE_BUG
+ fuse_flush_cache_page(vma, cs->addr, page_to_pfn(cs->pg));
+#endif
cs->buf = cs->mapaddr + offset;
cs->len = min(PAGE_SIZE - offset, cs->seglen);
cs->seglen -= cs->len;
@@ -573,6 +589,11 @@ static int fuse_copy_do(struct fuse_copy
{
unsigned ncpy = min(*size, cs->len);
if (val) {
+#ifdef DCACHE_BUG
+ // patch from mailing list, it is very important, otherwise,
+ // can't mount, or ls mount point will hang
+ fuse_flush_cache_all();
+#endif
if (cs->write)
memcpy(cs->buf, *val, ncpy);
else
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -8,6 +8,7 @@
#ifndef _FS_FUSE_I_H
#define _FS_FUSE_I_H
+#define DCACHE_BUG
#include <linux/fuse.h>
#include <linux/fs.h>
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -1201,6 +1201,10 @@ static int __init fuse_init(void)
printk(KERN_INFO "fuse init (API version %i.%i)\n",
FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
+#ifdef DCACHE_BUG
+printk("fuse init: DCACHE_BUG enabled\n");
+#endif
+
INIT_LIST_HEAD(&fuse_conn_list);
res = fuse_fs_init();
if (res)

@ -1,66 +0,0 @@
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -43,6 +43,7 @@
#ifndef __ASSEMBLY__
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
#include <asm/io.h>
extern void build_clear_page(void);
@@ -78,13 +79,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
- struct page *to);
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -203,30 +203,6 @@ void kunmap_coherent(void)
preempt_check_resched();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to, KM_USER1);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from, KM_USER0);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom, KM_USER0);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto, KM_USER1);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

@ -1,319 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -62,6 +62,7 @@ config BCM47XX
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
select SSB_EMBEDDED
+ select SSB_B43_PCI_BRIDGE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -23,10 +24,19 @@
*/
#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
#include <asm/irq_cpu.h>
+
+extern struct ssb_bus ssb_bcm47xx;
+
+
void plat_irq_dispatch(void)
{
u32 cause;
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -24,10 +24,10 @@
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <nvram.h>
+#include "include/nvram.h"
#define MB * 1048576
-extern struct ssb_bus ssb;
+extern struct ssb_bus ssb_bcm47xx;
static char nvram_buf[NVRAM_SPACE];
static int cfe_env;
@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
{
- struct ssb_mipscore *mcore = &ssb.mipscore;
+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
struct nvram_header *header;
int i;
u32 base, lim, off;
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -2,7 +2,7 @@
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
* Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -25,18 +25,28 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/init.h>
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
-#include <bcm47xx.h>
#include <asm/fw/cfe/cfe_api.h>
+#include <linux/pm.h>
+
+#include "include/nvram.h"
struct ssb_bus ssb_bcm47xx;
EXPORT_SYMBOL(ssb_bcm47xx);
+extern void bcm47xx_pci_init(void);
+
static void bcm47xx_machine_restart(char *command)
{
printk(KERN_ALERT "Please stand by while rebooting the system...\n");
@@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void)
cpu_relax();
}
-static void str2eaddr(char *str, char *dest)
+static void e_aton(char *str, char *dest)
{
int i = 0;
@@ -73,52 +83,142 @@ static void str2eaddr(char *str, char *d
}
}
-static int bcm47xx_get_invariants(struct ssb_bus *bus,
- struct ssb_init_invariants *iv)
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
{
- char buf[100];
+ char *s;
- /* Fill boardinfo structure */
- memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
+ memset(sprom, 0xFF, sizeof(struct ssb_sprom));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
-
- /* Fill sprom structure */
- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- iv->sprom.revision = 3;
-
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et0mac);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et1mac);
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ sprom->revision = 1;
+ if ((s = nvram_get("il0macaddr")))
+ e_aton(s, sprom->il0mac);
+ if ((s = nvram_get("et0macaddr")))
+ e_aton(s, sprom->et0mac);
+ if ((s = nvram_get("et1macaddr")))
+ e_aton(s, sprom->et1mac);
+ if ((s = nvram_get("et0phyaddr")))
+ sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("et1phyaddr")))
+ sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("et0mdcport")))
+ sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
+ if ((s = nvram_get("et1mdcport")))
+ sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
+ if ((s = nvram_get("pa0b0")))
+ sprom->pa0b0 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa0b1")))
+ sprom->pa0b1 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa0b2")))
+ sprom->pa0b2 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa1b0")))
+ sprom->pa1b0 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa1b1")))
+ sprom->pa1b1 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa1b2")))
+ sprom->pa1b2 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("wl0gpio0")))
+ sprom->gpio0 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("wl0gpio1")))
+ sprom->gpio1 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("wl0gpio2")))
+ sprom->gpio2 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("wl0gpio3")))
+ sprom->gpio3 = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa0maxpwr")))
+ sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa1maxpwr")))
+ sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa0itssit")))
+ sprom->itssi_bg = simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("pa1itssit")))
+ sprom->itssi_a = simple_strtoul(s, NULL, 0);
+ sprom->boardflags_lo = 0;
+ if ((s = nvram_get("boardflags")))
+ sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
+ sprom->boardflags_hi = 0;
+ if ((s = nvram_get("boardflags2")))
+ sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
+}
+
+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
+{
+ char *s;
+
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+ if ((s = nvram_get("boardtype")))
+ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
+ if ((s = nvram_get("boardrev")))
+ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
+
+ bcm47xx_fill_sprom(&iv->sprom);
+
+ if ((s = nvram_get("cardbus")))
+ iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
return 0;
}
void __init plat_mem_setup(void)
{
- int err;
+ int i, err;
+ char *s;
+ struct ssb_mipscore *mcore;
+
+ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
+ if (err) {
+ const char *msg = "Failed to initialize SSB bus (err %d)\n";
+ printk(msg, err); /* Make sure the message gets out of the box. */
+ panic(msg, err);
+ }
+ mcore = &ssb_bcm47xx.mipscore;
- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
- bcm47xx_get_invariants);
- if (err)
- panic("Failed to initialize SSB bus (err %d)\n", err);
+ s = nvram_get("kernel_args");
+ if (s && !strncmp(s, "console=ttyS1", 13)) {
+ struct ssb_serial_port port;
+
+ printk("Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+ s.line = i;
+ s.mapbase = (unsigned int) port->regs;
+ s.membase = port->regs;
+ s.irq = port->irq + 2;
+ s.uartclk = port->baud_base;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ s.iotype = SERIAL_IO_MEM;
+ s.regshift = port->reg_shift;
+
+ early_serial_setup(&s);
+ }
+ printk("Serial init done.\n");
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
}
+static int __init bcm47xx_register_gpiodev(void)
+{
+ static struct resource res = {
+ .start = 0xFFFFFFFF,
+ };
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
+ if (!pdev) {
+ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+device_initcall(bcm47xx_register_gpiodev);
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -22,11 +22,17 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/serial_reg.h>
+#include <linux/interrupt.h>
#include <linux/ssb/ssb.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
#include <asm/time.h>
-#include <bcm47xx.h>
+
+extern struct ssb_bus ssb_bcm47xx;
void __init plat_time_init(void)
{

@ -1,18 +0,0 @@
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
if ((idx == PCI_ROM_RESOURCE) &&
(!(r->flags & IORESOURCE_ROM_ENABLE)))
continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource collisions\n",
+ if (!r->start && r->end)
+ printk(KERN_WARNING "PCI: Device %s resource"
+ "collisions detected. Ignoring...\n",
pci_name(dev));
- return -EINVAL;
- }
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)

@ -1,14 +0,0 @@
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

@ -1,329 +0,0 @@
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -41,6 +41,7 @@
#include <linux/prefetch.h>
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <net/checksum.h>
#include <net/ip.h>
@@ -466,8 +467,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
tp->read32_mbox(tp, off);
}
@@ -477,7 +479,7 @@ static void tg3_write32_tx_mbox(struct t
writel(val, mbox);
if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
writel(val, mbox);
- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+ if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
readl(mbox);
}
@@ -777,7 +779,7 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
{
u32 frame_val;
unsigned int loops;
@@ -791,7 +793,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -826,7 +828,12 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+{
+ return __tg3_readphy(tp, tp->phy_addr, reg, val);
+}
+
+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
{
u32 frame_val;
unsigned int loops;
@@ -842,7 +849,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -875,6 +882,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+{
+ return __tg3_writephy(tp, tp->phy_addr, reg, val);
+}
+
static int tg3_bmcr_reset(struct tg3 *tp)
{
u32 phy_control;
@@ -2381,6 +2393,9 @@ static int tg3_nvram_read(struct tg3 *tp
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
@@ -2712,8 +2727,10 @@ static int tg3_set_power_state(struct tg
tg3_frob_aux_power(tp);
/* Workaround for unstable PLL clock */
- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
+ if ((tp->phy_id & PHY_ID_MASK) != PHY_ID_BCM5750_2 &&
+ /* !!! FIXME !!! */
+ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
u32 val = tr32(0x7d00);
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
@@ -3205,6 +3222,14 @@ relink:
tg3_phy_copper_begin(tp);
+ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
+ current_link_up = 1;
+ current_speed = SPEED_1000; //FIXME
+ current_duplex = DUPLEX_FULL;
+ tp->link_config.active_speed = current_speed;
+ tp->link_config.active_duplex = current_duplex;
+ }
+
tg3_readphy(tp, MII_BMSR, &tmp);
if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
(tmp & BMSR_LSTATUS))
@@ -6633,6 +6658,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
@@ -6910,6 +6940,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* BCM4785: In order to avoid repercussions from using potentially
+ * defective internal ROM, stop the Rx RISC CPU, which is not
+ * required. */
+ tg3_stop_fw(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ }
+
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -7089,9 +7127,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
- /* Clear firmware's nvram arbitration. */
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
+ /* Clear firmware's nvram arbitration. */
+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ }
+
return 0;
}
@@ -7154,6 +7195,11 @@ static int tg3_load_5701_a0_firmware_fix
const __be32 *fw_data;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -7213,6 +7259,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
return 0;
@@ -8317,6 +8368,11 @@ static void tg3_timer(unsigned long __op
spin_lock(&tp->lock);
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ /* BCM4785: Flush posted writes from GbE to host memory. */
+ tr32(HOSTCC_MODE);
+ }
+
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -10215,6 +10271,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
return 0;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't have NVRAM. */
+ return 0;
+ }
+
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
@@ -11015,7 +11076,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -11031,7 +11092,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
spin_unlock_bh(&tp->lock);
return err;
@@ -11676,6 +11737,12 @@ static void __devinit tg3_get_5717_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
+ return;
+ }
+
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -11937,6 +12004,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -13247,6 +13317,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ tp->write32_tx_mbox = tg3_write_flush_reg32;
+ tp->write32_rx_mbox = tg3_write_flush_reg32;
+ }
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -13638,6 +13713,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ }
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -14140,6 +14219,7 @@ static char * __devinit tg3_phy_string(s
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
+ case PHY_ID_BCM5750_2: return "5750-2";
case PHY_ID_BCM5752: return "5752";
case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
@@ -14352,6 +14432,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ if (pdev_is_ssb_gige_core(pdev)) {
+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
+ if (ssb_gige_must_flush_posted_writes(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
+ if (ssb_gige_have_roboswitch(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
+ }
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1959,6 +1959,9 @@
#define NIC_SRAM_RGMII_STD_IBND_DISABLE 0x00000004
#define NIC_SRAM_RGMII_EXT_IBND_RX_EN 0x00000008
#define NIC_SRAM_RGMII_EXT_IBND_TX_EN 0x00000010
+#define TG3_FLG3_IS_SSB_CORE 0x00000800
+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00001000
+#define TG3_FLG3_ROBOSWITCH 0x00002000
#define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000
@@ -2874,6 +2877,7 @@ struct tg3 {
#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM5755 0xbc050cc0
+#define PHY_ID_BCM5750_2 0xbc050cd0
#define PHY_ID_BCM5787 0xbc050ce0
#define PHY_ID_BCM5756 0xbc050ed0
#define PHY_ID_BCM5784 0xbc050fa0
@@ -2921,7 +2925,8 @@ struct tg3 {
(X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
(X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
(X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
- (X) == PHY_ID_BCM5717 || (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM5717 || (X) == PHY_ID_BCM8002 || \
+ (X) == PHY_ID_BCM5750_2)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;

@ -1,108 +0,0 @@
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -32,6 +32,7 @@
#include <asm/fw/cfe/cfe_error.h>
static int cfe_cons_handle;
+static void (* __prom_putchar)(char c);
const char *get_system_type(void)
{
@@ -40,65 +41,40 @@ const char *get_system_type(void)
void prom_putchar(char c)
{
+ if (__prom_putchar)
+ __prom_putchar(c);
+}
+
+void prom_putchar_cfe(char c)
+{
while (cfe_write(cfe_cons_handle, &c, 1) == 0)
;
}
-static __init void prom_init_cfe(void)
+static __init int prom_init_cfe(void)
{
uint32_t cfe_ept;
uint32_t cfe_handle;
uint32_t cfe_eptseal;
- int argc = fw_arg0;
- char **envp = (char **) fw_arg2;
- int *prom_vec = (int *) fw_arg3;
-
- /*
- * Check if a loader was used; if NOT, the 4 arguments are
- * what CFE gives us (handle, 0, EPT and EPTSEAL)
- */
- if (argc < 0) {
- cfe_handle = (uint32_t)argc;
- cfe_ept = (uint32_t)envp;
- cfe_eptseal = (uint32_t)prom_vec;
- } else {
- if ((int)prom_vec < 0) {
- /*
- * Old loader; all it gives us is the handle,
- * so use the "known" entrypoint and assume
- * the seal.
- */
- cfe_handle = (uint32_t)prom_vec;
- cfe_ept = 0xBFC00500;
- cfe_eptseal = CFE_EPTSEAL;
- } else {
- /*
- * Newer loaders bundle the handle/ept/eptseal
- * Note: prom_vec is in the loader's useg
- * which is still alive in the TLB.
- */
- cfe_handle = prom_vec[0];
- cfe_ept = prom_vec[2];
- cfe_eptseal = prom_vec[3];
- }
- }
- if (cfe_eptseal != CFE_EPTSEAL) {
- /* too early for panic to do any good */
- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
- while (1) ;
- }
+ cfe_eptseal = (uint32_t) fw_arg3;
+ cfe_handle = (uint32_t) fw_arg0;
+ cfe_ept = (uint32_t) fw_arg2;
+
+ if (cfe_eptseal != CFE_EPTSEAL)
+ return -1;
cfe_init(cfe_handle, cfe_ept);
+ return 0;
}
-static __init void prom_init_console(void)
+static __init void prom_init_console_cfe(void)
{
/* Initialize CFE console */
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
}
-static __init void prom_init_cmdline(void)
+static __init void prom_init_cmdline_cfe(void)
{
static char buf[COMMAND_LINE_SIZE] __initdata;
@@ -160,9 +136,12 @@ static __init void prom_init_mem(void)
void __init prom_init(void)
{
- prom_init_cfe();
- prom_init_console();
- prom_init_cmdline();
+ if (prom_init_cfe() == 0) {
+ //prom_init_console_cfe();
+ //prom_init_cmdline_cfe();
+ __prom_putchar = prom_putchar_cfe;
+ }
+
prom_init_mem();
}

@ -1,178 +0,0 @@
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ssb/ssb.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-/* GPIO definitions for the WGT634U */
-#define WGT634U_GPIO_LED 3
-#define WGT634U_GPIO_RESET 2
-#define WGT634U_GPIO_TP1 7
-#define WGT634U_GPIO_TP2 6
-#define WGT634U_GPIO_TP3 5
-#define WGT634U_GPIO_TP4 4
-#define WGT634U_GPIO_TP5 1
-
-static struct gpio_led wgt634u_leds[] = {
- {
- .name = "power",
- .gpio = WGT634U_GPIO_LED,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static struct gpio_led_platform_data wgt634u_led_data = {
- .num_leds = ARRAY_SIZE(wgt634u_leds),
- .leds = wgt634u_leds,
-};
-
-static struct platform_device wgt634u_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wgt634u_led_data,
- }
-};
-
-
-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
- firmware. */
-static struct mtd_partition wgt634u_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x60000, /* 384k */
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "config",
- .offset = 0x60000,
- .size = 0x20000 /* 128k */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0x140000 /* 1280k */
- },
- {
- .name = "jffs",
- .offset = 0x1c0000,
- .size = 0x620000 /* 6272k */
- },
- {
- .name = "nvram",
- .offset = 0x7e0000,
- .size = 0x20000 /* 128k */
- },
-};
-
-static struct physmap_flash_data wgt634u_flash_data = {
- .parts = wgt634u_partitions,
- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
-};
-
-static struct resource wgt634u_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device wgt634u_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &wgt634u_flash_data, },
- .resource = &wgt634u_flash_resource,
- .num_resources = 1,
-};
-
-/* Platform devices */
-static struct platform_device *wgt634u_devices[] __initdata = {
- &wgt634u_flash,
- &wgt634u_gpio_leds,
-};
-
-static irqreturn_t gpio_interrupt(int irq, void *ignored)
-{
- int state;
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
- state = gpio_get_value(WGT634U_GPIO_RESET);
-
- /* Interrupt are level triggered, revert the interrupt polarity
- to clear the interrupt. */
- gpio_polarity(WGT634U_GPIO_RESET, state);
-
- if (!state) {
- printk(KERN_INFO "Reset button pressed");
- ctrl_alt_del();
- }
-
- return IRQ_HANDLED;
-}
-
-static int __init wgt634u_init(void)
-{
- /* There is no easy way to detect that we are running on a WGT634U
- * machine. Use the MAC address as an heuristic. Netgear Inc. has
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
-
- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- gpio_intmask(WGT634U_GPIO_RESET, 1);
- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
-
- wgt634u_flash_data.width = mcore->flash_buswidth;
- wgt634u_flash_resource.start = mcore->flash_window;
- wgt634u_flash_resource.end = mcore->flash_window
- + mcore->flash_window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
- } else
- return -ENODEV;
-}
-
-module_init(wgt634u_init);
-

@ -1,11 +0,0 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -850,7 +850,7 @@ static int b44_rx(struct b44 *bp, int bu
struct sk_buff *copy_skb;
b44_recycle_rx(bp, cons, bp->rx_prod);
- copy_skb = dev_alloc_skb(len + 2);
+ copy_skb = netdev_alloc_skb(bp->dev, len + 2);
if (copy_skb == NULL)
goto drop_it_no_recycle;

@ -1,10 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -65,7 +65,6 @@ config BCM47XX
select SSB_B43_PCI_BRIDGE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
select CFE
help
Support for BCM47XX based boards

@ -1,135 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -20,10 +20,25 @@
#ifdef CONFIG_BCM47XX
#include <asm/paccess.h>
#include <linux/ssb/ssb.h>
-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void) {
+ return (*(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void*)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr) {
+ return (*(unsigned long *)addr);
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void*)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr) {
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
#else
#define BCM4710_DUMMY_RREG()
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -611,6 +611,9 @@ build_get_pgde32(u32 **p, unsigned int t
#endif
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -749,12 +752,12 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(&p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -766,6 +769,9 @@ static void __cpuinit build_r4000_tlb_re
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
#ifdef CONFIG_HUGETLB_PAGE
@@ -1206,12 +1212,12 @@ build_r4000_tlbchange_handler_head(u32 *
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
#endif
@@ -1248,6 +1254,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_update_entries(p, tmp, ptr);
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -22,6 +22,19 @@
#include <asm/page.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
#define PANIC_PIC(msg) \
.set push; \
.set reorder; \
@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
.set noat
#ifdef CONFIG_BCM47XX
nop
- nop
#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set mips3
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c

@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -911,6 +911,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
exca_writeb(socket, I365_CSCINT, 0);
@@ -925,6 +927,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, 0);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1005,6 +1008,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1243,6 +1250,15 @@ static int __devinit yenta_probe(struct
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

@ -1,45 +0,0 @@
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -384,6 +384,34 @@ static int ssb_device_uevent(struct devi
ssb_dev->id.revision);
}
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf (buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf (buf, "%s\n", ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+ __ATTR_RO(name),
+ __ATTR_RO(core_num),
+ __ATTR_RO(coreid),
+ __ATTR_RO(vendor),
+ __ATTR_RO(revision),
+ __ATTR_RO(irq),
+ __ATTR_NULL,
+};
+
static struct bus_type ssb_bustype = {
.name = "ssb",
.match = ssb_bus_match,
@@ -393,6 +421,7 @@ static struct bus_type ssb_bustype = {
.suspend = ssb_device_suspend,
.resume = ssb_device_resume,
.uevent = ssb_device_uevent,
+ .dev_attrs = ssb_device_attrs,
};
static void ssb_buses_lock(void)

@ -1,104 +0,0 @@
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -92,6 +92,14 @@ const char *ssb_core_name(u16 coreid)
return "ARM 1176";
case SSB_DEV_ARM_7TDMI:
return "ARM 7TDMI";
+ case SSB_DEV_ETHERNET_GBIT2:
+ return "Gigabit MAC";
+ case SSB_DEV_MIPS_74K:
+ return "MIPS 74k";
+ case SSB_DEV_DDR_CTRLR:
+ return "DDR1/2 memory controller";
+ case SSB_DEV_I2S:
+ return "I2S";
}
return "UNKNOWN";
}
@@ -150,6 +158,7 @@ static u8 chipid_to_nrcores(u16 chipid)
case 0x4710:
case 0x4610:
case 0x4704:
+ case 0x4716:
return 9;
default:
ssb_printk(KERN_ERR PFX
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -151,9 +151,16 @@ struct ssb_bus_ops {
#define SSB_DEV_MINI_MACPHY 0x823
#define SSB_DEV_ARM_1176 0x824
#define SSB_DEV_ARM_7TDMI 0x825
+#define SSB_DEV_ETHERNET_GBIT2 0x82d
+#define SSB_DEV_MIPS_74K 0x82c
+#define SSB_DEV_DDR_CTRLR 0x82e
+#define SSB_DEV_I2S 0x834
+#define SSB_DEV_DEFAULT 0xfff
/* Vendor-ID values */
#define SSB_VENDOR_BROADCOM 0x4243
+#define SSB_VENDOR_BROADCOM2 0x04BF
+#define SSB_VENDOR_ARM 0x43b
/* Some kernel subsystems poke with dev->drvdata, so we must use the
* following ugly workaround to get from struct device to struct ssb_device */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -11,6 +11,7 @@
#define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */
#define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */
#define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */
+#define SSB_AI_BASE 0x18100000 /* base for AI registers */
#define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */
#define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */
@@ -26,6 +27,7 @@
#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000)
#define SSB_LED (SSB_EXTIF_BASE + 0x00900000)
+#define SSB_EROM_ASD_SZ_BASE 0x00001000
/* Enumeration space constants */
#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */
@@ -453,5 +455,41 @@ enum {
#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */
#define SSB_ADM_BASE2_SHIFT 16
+/***** EROM defines for AI type busses *****/
+#define SSB_EROM_VALID 1
+#define SSB_EROM_END 0xe
+#define SSB_EROM_TAG 0xe
+/* Adress Space Descriptor */
+#define SSB_EROM_ASD 0x4
+#define SSB_EROM_ASD_SP_MASK 0x00000f00
+#define SSB_EROM_ASD_SP_SHIFT 8
+#define SSB_EROM_ASD_ST_MASK 0x000000c0
+#define SSB_EROM_ASD_ST_SLAVE 0x00000000
+#define SSB_EROM_ASD_ST_BRIDGE 0x00000040
+#define SSB_EROM_ASD_ST_MWRAP 0x000000c0
+#define SSB_EROM_ASD_ST_SWRAP 0x00000080
+#define SSB_EROM_ASD_ADDR_MASK 0xfffff000
+#define SSB_EROM_ASD_AG32 0x00000008
+#define SSB_EROM_ASD_SZ_MASK 0x00000030
+#define SSB_EROM_ASD_SZ_SZD 0x00000030
+#define SSB_EROM_ASD_SZ_SHIFT 4
+#define SSB_EROM_CI 0
+#define SSB_EROM_CIA_CID_MASK 0x000fff00
+#define SSB_EROM_CIA_CID_SHIFT 8
+#define SSB_EROM_CIA_MFG_MASK 0xfff00000
+#define SSB_EROM_CIA_MFG_SHIFT 20
+#define SSB_EROM_CIB_REV_MASK 0xff000000
+#define SSB_EROM_CIB_REV_SHIFT 24
+#define SSB_EROM_CIB_NMW_MASK 0x0007c000
+#define SSB_EROM_CIB_NSW_MASK 0x00f80000
+#define SSB_EROM_CIB_NSP_MASK 0x00003e00
+
+/***** Registers of AI config space *****/
+#define SSB_AI_RESETCTRL 0x800 /* maybe 0x804 for big endian */
+#define SSB_AI_RESETCTRL_RESET 1
+#define SSB_AI_IOCTRL 0x408 /* maybe 0x40c for big endian */
+#define SSB_CF_FGC 0x0002
+#define SSB_CF_CLOCK_EN 0x001
+#define SSB_AI_oobselouta30 0x100
#endif /* LINUX_SSB_REGS_H_ */

@ -1,23 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -29,7 +29,9 @@
#define MB * 1048576
extern struct ssb_bus ssb_bcm47xx;
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
+
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT */
Loading…
Cancel
Save