dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

bcm47xx: remove support for kernel 4.14

Browse Source 
We currently support three kernel versions on this target, let's
just get rid of the oldest one.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Adrian Schmutzler 4 years ago
parent a002a24536
commit 06feb09e54
25 changed files with 0 additions and 2795 deletions
Show Stats Download Patch File Download Diff File

215
target/linux/bcm47xx/config-4.14
Unescape Escape View File

@ -1,215 +0,0 @@
CONFIG_ADM6996_PHY=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
# CONFIG_ARCH_HAS_SG_CHAIN is not set
# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_BCM47XX=y
CONFIG_BCM47XX_BCMA=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
# CONFIG_BGMAC_BCMA is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_CPU_BMIPS is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_WDT=y
# CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_GPIO_REGISTER=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
# CONFIG_OF is not set
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_RCU_NEED_SEGCBLIST is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SRCU=y
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SFLASH=y
CONFIG_SSB_SPROM=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_B53=y
# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
CONFIG_SWCONFIG_B53_PHY_DRIVER=y
CONFIG_SWCONFIG_B53_PHY_FIXUP=y
# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_BMIPS=y
CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
CONFIG_WATCHDOG_CORE=y

86
target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
Unescape Escape View File

@ -1,86 +0,0 @@
From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001
From: Dan Haab <dan.haab@luxul.com>
Date: Tue, 27 Mar 2018 11:24:34 -0600
Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
Some Luxul devices use PCIe connected GPIO LEDs that are not available
until the PCI subsytem and its drivers load. Using the same array for
these LEDs would block registering any LEDs until all GPIOs become
available. This may be undesired behavior as some LEDs should be
available as early as possible (e.g. system status LED). This patch will
allow registering available LEDs while deferring these PCIe GPIO
connected 'extra' LEDs until they become available.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18952/
Signed-off-by: James Hogan <jhogan@kernel.org>
---
arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -409,6 +409,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc
};
static const struct gpio_led
+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
+ BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
@@ -435,6 +441,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc
BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
/* Microsoft */
static const struct gpio_led
@@ -528,6 +539,12 @@ static struct gpio_led_platform_data bcm
bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
} while (0)
+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
+#define bcm47xx_set_pdata_extra(dev_leds) do { \
+ bcm47xx_leds_pdata_extra.leds = dev_leds; \
+ bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds); \
+} while (0)
+
void __init bcm47xx_leds_register(void)
{
enum bcm47xx_board board = bcm47xx_board_get();
@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
break;
case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
break;
case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
break;
case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
break;
case BCM47XX_BOARD_MICROSOFT_MN700:
@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
}
gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+ if (bcm47xx_leds_pdata_extra.num_leds)
+ gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
}

96
target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch
Unescape Escape View File

@ -1,96 +0,0 @@
From 88b882ba0b0b7439d16d2c9df7f111cdf793443b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 8 Apr 2018 22:39:15 +0200
Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR1000 V3
This adds support for detecting this model board and registers some LEDs
and buttons.
There are two uncommon things regarding this device:
1) It can use two different "board_id" ID values.
Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
in firmware file header. There are two reports (one from an OpenWrt
user) of a different "U12H139T50_NETGEAR" magic though.
2) Power LEDs share GPIOs with buttons.
Amber one seems to share GPIO 2 with WPS button and green one seems
to share GPIO 3 with reset button. It remains unknown how to support
them and handle buttons at the same time. For that reason they aren't
added to the list of supported LEDs.
---
arch/mips/bcm47xx/board.c | 2 ++
arch/mips/bcm47xx/buttons.c | 9 +++++++++
arch/mips/bcm47xx/leds.c | 9 +++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
4 files changed, 21 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -172,6 +172,8 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -412,6 +412,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_RESTART),
BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
@@ -670,6 +676,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR3500L:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -498,6 +498,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
};
static const struct gpio_led
+bcm47xx_leds_netgear_wnr1000_v3[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -758,6 +764,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR3500L:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -110,6 +110,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_NETGEAR_WNDR4000,
BCM47XX_BOARD_NETGEAR_WNDR4500V1,
BCM47XX_BOARD_NETGEAR_WNDR4500V2,
+ BCM47XX_BOARD_NETGEAR_WNR1000_V3,
BCM47XX_BOARD_NETGEAR_WNR2000,
BCM47XX_BOARD_NETGEAR_WNR3500L,
BCM47XX_BOARD_NETGEAR_WNR3500U,

24
target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch
Unescape Escape View File

@ -1,24 +0,0 @@
From 663beaeacf2552ed07405e69e96a18775e069eab Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 8 Apr 2018 22:51:08 +0200
Subject: [PATCH] firmware: bcm47xx_nvram: support small (0x6000 B) NVRAM
partitions
Some old devices with 4 MiB flashes were using 0x1000 block size and
could use smaller (0x6000 bytes) flash partition for storing NVRAM
content. This adds support for reading NVRAM on Netgear WNR1000 V3.
---
drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -36,7 +36,7 @@ struct nvram_header {
static char nvram_buf[NVRAM_SPACE];
static size_t nvram_len;
-static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
static u32 find_nvram_size(void __iomem *end)
{

34
target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
Unescape Escape View File

@ -1,34 +0,0 @@
From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
Date: Mon, 11 Mar 2019 22:08:22 +0100
Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Eric has reported on OpenWrt's bug tracking system[1], that he's not
able to use USB devices on his WNDR3400v2 device after the boot, until
he turns on GPIO #21 manually through sysfs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Eric Bohlman <ericbohlman@gmail.com>
Tested-by: Eric Bohlman <ericbohlman@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
arch/mips/bcm47xx/workarounds.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/bcm47xx/workarounds.c
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
case BCM47XX_BOARD_NETGEAR_WNR3500L:
bcm47xx_workarounds_enable_usb_power(12);
break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
bcm47xx_workarounds_enable_usb_power(21);
break;

510
target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch
Unescape Escape View File

@ -1,510 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -26,6 +26,38 @@
extern void (*r4k_blast_dcache)(void);
extern void (*r4k_blast_icache)(void);
+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void)
+{
+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr)
+{
+ return *(unsigned long *)addr;
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr)
+{
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
+
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
@@ -206,6 +241,7 @@ static inline int protected_flush_icache
#ifdef CONFIG_EVA
return protected_cachee_op(Hit_Invalidate_I, addr);
#else
+ BCM4710_DUMMY_RREG();
return protected_cache_op(Hit_Invalidate_I, addr);
#endif
}
@@ -219,6 +255,7 @@ static inline int protected_flush_icache
*/
static inline int protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
#ifdef CONFIG_EVA
return protected_cachee_op(Hit_Writeback_Inv_D, addr);
#else
@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
static inline void extra##blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
\
__##pfx##flush_prologue \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
+ \
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
#define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
__BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \
static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long lsize_2 = lsize * 2; \
- unsigned long lsize_3 = lsize * 3; \
- unsigned long lsize_4 = lsize * 4; \
- unsigned long lsize_5 = lsize * 5; \
- unsigned long lsize_6 = lsize * 6; \
- unsigned long lsize_7 = lsize * 7; \
- unsigned long lsize_8 = lsize * 8; \
unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \
- int lines = (aend - addr) / lsize; \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
+ war \
\
__##pfx##flush_prologue \
\
- while (lines >= 8) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- prot##cache_op(hitop, addr + lsize_2); \
- prot##cache_op(hitop, addr + lsize_3); \
- prot##cache_op(hitop, addr + lsize_4); \
- prot##cache_op(hitop, addr + lsize_5); \
- prot##cache_op(hitop, addr + lsize_6); \
- prot##cache_op(hitop, addr + lsize_7); \
- addr += lsize_8; \
- lines -= 8; \
- } \
- \
- if (lines & 0x4) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- prot##cache_op(hitop, addr + lsize_2); \
- prot##cache_op(hitop, addr + lsize_3); \
- addr += lsize_4; \
- } \
- \
- if (lines & 0x2) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- addr += lsize_2; \
- } \
- \
- if (lines & 0x1) { \
+ while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+ addr += lsize; \
} \
\
__##pfx##flush_epilogue \
@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
#ifndef CONFIG_EVA
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
#else
@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
__BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
#endif
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
- protected_, loongson2_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
+ protected_, loongson2_, , )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
/* Currently, this is very specific to Loongson-3 */
#define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize) \
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -428,6 +428,10 @@
eretnc
#else
.set arch=r4000
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set mips0
#endif
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -21,6 +21,19 @@
#include <asm/war.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
__INIT
/*
@@ -32,6 +45,9 @@
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set arch=r4000
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -39,6 +39,9 @@
#include <asm/dma-coherence.h>
#include <asm/mips-cps.h>
+/* For enabling BCM4710 cache workarounds */
+static int bcm4710 = 0;
+
/*
* Bits describing what cache ops an SMP callback function may perform.
*
@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_user_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
}
R4600_HIT_CACHEOP_WAR_IMPL;
+ BCM4710_PROTECTED_FILL_TLB(addr);
+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
if (!cpu_has_ic_fills_f_dc) {
if (dc_lsize)
vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
@@ -1880,6 +1894,17 @@ static void coherency_setup(void)
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1926,6 +1951,15 @@ void r4k_cache_init(void)
extern void build_copy_page(void);
struct cpuinfo_mips *c = &current_cpu_data;
+ /* Check if special workarounds are required */
+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
probe_vcache();
setup_scache();
@@ -2004,7 +2038,15 @@ void r4k_cache_init(void)
*/
local_r4k___flush_cache_all(NULL);
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
board_cache_error_setup = r4k_cache_error_setup;
/*
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -983,6 +983,9 @@ void build_get_pgde32(u32 **p, unsigned
uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -1344,6 +1347,9 @@ static void build_r4000_tlb_refill_handl
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -1355,6 +1361,9 @@ static void build_r4000_tlb_refill_handl
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
@@ -2064,6 +2073,9 @@ build_r4000_tlbchange_handler_head(u32 *
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
@@ -2110,6 +2122,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT

78
target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch
Unescape Escape View File

@ -1,78 +0,0 @@
From: Jeff Hansen <jhansen@cardaccess-inc.com>
Subject: [PATCH] kmap_coherent
On ASUS WL-500gP there are some "Data bus error"s when executing simple
commands liks "ps" or "cat /proc/1/cmdline".
This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
---
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -187,6 +187,9 @@
#ifndef cpu_has_local_ebase
#define cpu_has_local_ebase 1
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -80,4 +80,6 @@
#define cpu_scache_line_size() 0
#define cpu_has_vz 0
+#define cpu_use_kmap_coherent 0
+
#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
map_coherent = (cpu_has_dc_aliases &&
page_mapcount(page) &&
!Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -170,7 +170,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -192,7 +192,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -210,7 +210,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

121
target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch
Unescape Escape View File

@ -1,121 +0,0 @@
From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Nov 2013 17:03:59 +0100
Subject: [PATCH 210/210] b44: register adm switch
---
drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/b44.h | 3 ++
2 files changed, 60 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/adm6996-gpio.h>
#include <linux/uaccess.h>
#include <asm/io.h>
@@ -2251,6 +2253,69 @@ static void b44_adjust_link(struct net_d
}
}
+#ifdef CONFIG_BCM47XX
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ int gpio;
+ struct platform_device *pdev;
+ struct adm6996_gpio_platform_data adm_data = {0};
+ struct platform_device_info info = {0};
+
+ adm_data.model = ADM6996L;
+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
+ if (gpio >= 0)
+ adm_data.eecs = gpio;
+ else
+ adm_data.eecs = 2;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
+ if (gpio >= 0)
+ adm_data.eesk = gpio;
+ else
+ adm_data.eesk = 3;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
+ if (gpio >= 0)
+ adm_data.eedi = gpio;
+ else
+ adm_data.eedi = 4;
+
+ /*
+ * We ignore the "adm_rc" GPIO here. The driver does not use it,
+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
+ */
+
+ info.parent = bp->sdev->dev;
+ info.name = "adm6996_gpio";
+ info.id = -1;
+ info.data = &adm_data;
+ info.size_data = sizeof(adm_data);
+
+ if (!bp->adm_switch) {
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ bp->adm_switch = pdev;
+ }
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+ if (bp->adm_switch)
+ platform_device_unregister(bp->adm_switch);
+}
+#else
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+
+}
+#endif /* CONFIG_BCM47XX */
+
static int b44_register_phy_one(struct b44 *bp)
{
struct mii_bus *mii_bus;
@@ -2286,6 +2351,9 @@ static int b44_register_phy_one(struct b
if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
+ b44_register_adm_switch(bp);
+
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
@@ -2480,6 +2548,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
+ b44_unregister_adm_switch(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
netif_napi_del(&bp->napi);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -408,6 +408,9 @@ struct b44 {
struct mii_bus *mii_bus;
int old_link;
struct mii_if_info mii_if;
+
+ /* platform device for associated switch */
+ struct platform_device *adm_switch;
};
#endif /* _B44_H */

54
target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch
Unescape Escape View File

@ -1,54 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
error:
pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
}
+
+static void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ char buf[20];
+ struct ssb_device *sdev = bp->sdev;
+
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (sdev->bus->sprom.board_num == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ } else {
+ /* WL-HDD */
+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ }
+ }
+ return;
+}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
@@ -2181,6 +2206,8 @@ static int b44_get_invariants(struct b44
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

25
target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch
Unescape Escape View File

@ -1,25 +0,0 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -31,6 +31,7 @@ config BCMA_HOST_PCI
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on BCMA
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
help
Host interface for a Broadcom AIX bus directly mapped into
the memory. This only works with the Broadcom SoCs from the
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -157,6 +157,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

21
target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch
Unescape Escape View File

@ -1,21 +0,0 @@
From: Wolfram Joost <dbox2@frokaschwei.de>
Subject: [PATCH] fork_cacheflush
On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
seem to be caused by a kernel. They can be avoided by:
1) Disabling highpage
2) Using flush_cache_mm in flush_cache_dup_mm
For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -47,7 +47,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

74
target/linux/bcm47xx/patches-4.14/310-no_highpage.patch
Unescape Escape View File

@ -1,74 +0,0 @@
From: Jeff Hansen <jhansen@cardaccess-inc.com>
Subject: [PATCH] no highpage
On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
seem to be caused by a kernel. They can be avoided by:
1) Disabling highpage
2) Using flush_cache_mm in flush_cache_dup_mm
For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
#endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -105,11 +106,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -164,30 +164,6 @@ void kunmap_coherent(void)
preempt_enable();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapcount(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

185
target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
Unescape Escape View File

@ -1,185 +0,0 @@
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
@@ -160,9 +161,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
+ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -27,6 +27,12 @@
/* Asus */
static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn10u[] __initconst = {
+ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(21, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_asus_rtn12[] __initconst = {
BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(1, KEY_RESTART),
@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
};
static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
BCM47XX_GPIO_KEY(5, KEY_WIMAX),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
@@ -385,6 +403,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
/* Netgear */
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(12, KEY_RESTART),
+ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_RESTART),
BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
@@ -471,6 +500,9 @@ int __init bcm47xx_buttons_register(void
int err;
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN10U:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
+ break;
case BCM47XX_BOARD_ASUS_RTN12:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
break;
@@ -601,6 +633,12 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
break;
@@ -664,6 +702,12 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
break;
+ case BCM47XX_BOARD_NETGEAR_R6300_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -72,6 +72,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT300NV11,
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
+ BCM47XX_BOARD_LINKSYS_WRT320N_V1,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
@@ -98,9 +99,12 @@ enum bcm47xx_board {
BCM47XX_BOARD_MOTOROLA_WR850GP,
BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
+ BCM47XX_BOARD_NETGEAR_R6300_V1,
BCM47XX_BOARD_NETGEAR_WGR614V8,
BCM47XX_BOARD_NETGEAR_WGR614V9,
BCM47XX_BOARD_NETGEAR_WGR614_V10,
+ BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
+ BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
BCM47XX_BOARD_NETGEAR_WNDR3300,
BCM47XX_BOARD_NETGEAR_WNDR3400V1,
BCM47XX_BOARD_NETGEAR_WNDR3400V2,
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -30,6 +30,14 @@
/* Asus */
static const struct gpio_led
+bcm47xx_leds_asus_rtn10u[] __initconst = {
+ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_rtn12[] __initconst = {
BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
enum bcm47xx_board board = bcm47xx_board_get();
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN10U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
+ break;
case BCM47XX_BOARD_ASUS_RTN12:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
break;
@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;

34
target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch
Unescape Escape View File

@ -1,34 +0,0 @@
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_
int trx_num = 0; /* Number of found TRX partitions */
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
int err;
+ bool found_nvram = false;
/*
* Some really old flashes (like AT45DB*) had smaller erasesize-s, but
@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_
if (buf[0] == NVRAM_HEADER) {
bcm47xxpart_add_part(&parts[curr_part++], "nvram",
master->size - blocksize, 0);
+ found_nvram = true;
break;
}
}
kfree(buf);
+ if (!found_nvram) {
+ pr_err("can not find a nvram partition reserve last block\n");
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
+ master->size - blocksize * 2, MTD_WRITEABLE);
+ for (i = 0; i < curr_part; i++) {
+ if (parts[i].size + parts[i].offset == master->size)
+ parts[i].offset -= blocksize * 2;
+ }
+ }
+
/*
* Assume that partitions end at the beginning of the one they are
* followed by.

41
target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch
Unescape Escape View File

@ -1,41 +0,0 @@
From: b.sander
Subject: [PATCH] pci: IDE fix
These are standard probing messages when using pdc202xx_old:
pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
PCI: Fixing up device 0000:00:01.0
0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
With the default MAX_HWIFS value after above we get:
ide2: BM-DMA at 0x0400-0x0407
ide3: BM-DMA at 0x0408-0x040f
Probing IDE interface ide2...
hde: CF500, CFA DISK drive
As you can see it's ide2 + ide3 and hde.
With this patch applied we get:
ide0: BM-DMA at 0x0400-0x0407
ide1: BM-DMA at 0x0408-0x040f
Probing IDE interface ide0...
hda: CF500, CFA DISK drive
This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
---
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -241,7 +241,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

17
target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch
Unescape Escape View File

@ -1,17 +0,0 @@
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4264,7 +4264,8 @@ static int tg3_power_down_prepare(struct
static void tg3_power_down(struct tg3 *tp)
{
pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
- pci_set_power_state(tp->pdev, PCI_D3hot);
+ if (!tg3_flag(tp, ROBOSWITCH))
+ pci_set_power_state(tp->pdev, PCI_D3hot);
}
static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)

73
target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
Unescape Escape View File

@ -1,73 +0,0 @@
From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 20 Nov 2014 21:32:42 +0100
Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+#include <bcm47xx_board.h>
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
{ NULL },
};
+/* Some devices use smaller blocks (and have more of them) */
+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
+ { "M25P16", 0x14, 0x1000, 512, },
+ { "M25P32", 0x15, 0x1000, 1024, },
+ { NULL },
+};
+
static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+ const struct bcma_sflash_tbl_e *e;
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WGR614_V10:
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
+ if (e->id == id)
+ return e;
+ }
+ return NULL;
+ default:
+ return NULL;
+ }
+}
+
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
case 0x13:
return -ENOTSUPP;
default:
+ e = bcma_sflash_shrink_flash(id);
+ if (e)
+ break;
+
for (e = bcma_sflash_st_tbl; e->name; e++) {
if (e->id == id)
break;

304
target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch
Unescape Escape View File

@ -1,304 +0,0 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/drivers/firmware/broadcom/Makefile
+++ b/drivers/firmware/broadcom/Makefile
@@ -1,2 +1,2 @@
-obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o
obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
--- /dev/null
+++ b/drivers/firmware/broadcom/cfe_env.c
@@ -0,0 +1,228 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char *cfe_env_get(unsigned char *nv_buf, const char *name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -37,6 +37,8 @@ struct nvram_header {
static char nvram_buf[NVRAM_SPACE];
static size_t nvram_len;
static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
static u32 find_nvram_size(void __iomem *end)
{
@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem
static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
{
struct nvram_header __iomem *header;
+ int i;
u32 off;
+ u32 *src, *dst;
u32 size;
if (nvram_len) {
@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io
return -EEXIST;
}
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *)nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return 0;
+ }
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam
if (!name)
return -EINVAL;
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ if (!value)
+ return -ENOENT;
+ return snprintf(val, val_len, "%s", value);
+ }
+
if (!nvram_len) {
err = nvram_init();
if (err)

101
target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch
Unescape Escape View File

@ -1,101 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -37,6 +37,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
+#include <linux/old_gpio_wdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
+static struct gpio_wdt_platform_data gpio_wdt_data;
+
+static struct platform_device gpio_wdt_device = {
+ .name = "gpio-wdt",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_wdt_data,
+ },
+};
+
+static int __init bcm47xx_register_gpio_watchdog(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
+ gpio_wdt_data.gpio = 7;
+ gpio_wdt_data.interval = HZ;
+ gpio_wdt_data.first_interval = HZ / 5;
+ return platform_device_register(&gpio_wdt_device);
+ default:
+ /* Nothing to do */
+ return 0;
+ }
+}
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
+ bcm47xx_register_gpio_watchdog();
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
CONFIG_BCM47XX_WDT=y
+CONFIG_GPIO_WDT=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_board.h>
+
+static bool ssb_watchdog_supported(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ /* The Huawei E970 has a hardware watchdog using a GPIO */
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ return false;
+ default:
+ return true;
+ }
+}
+#else
+static bool ssb_watchdog_supported(void)
+{
+ return true;
+}
+#endif
+
int ssb_watchdog_register(struct ssb_bus *bus)
{
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
+ if (!ssb_watchdog_supported())
+ return 0;
+
if (ssb_chipco_available(&bus->chipco)) {
wdt.driver_data = &bus->chipco;
wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;

360
target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch
Unescape Escape View File

@ -1,360 +0,0 @@
This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1473,6 +1473,15 @@ config WDT_MTX1
Hardware driver for the MTX-1 boards. This is a watchdog timer that
will reboot the machine after a 100 seconds timer expired.
+config GPIO_WDT
+ tristate "GPIO Hardware Watchdog"
+ help
+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
+ toggle interval settings are platform-specific. The driver
+ will stop toggling the GPIO (i.e. machine reboots) after a
+ 100 second timer expired and no process has written to
+ /dev/watchdog during that time.
+
config PNX833X_WDT
tristate "PNX833x Hardware Watchdog"
depends on SOC_PNX8335
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -163,6 +163,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
--- /dev/null
+++ b/drivers/watchdog/old_gpio_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * Driver for GPIO-controlled Hardware Watchdogs.
+ *
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
+ *
+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
+ *
+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
+ * All Rights Reserved.
+ * http://www.4g-systems.biz
+ *
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
+ *
+ * Release 0.01.
+ * Author: Michael Stickel michael.stickel@4g-systems.biz
+ *
+ * Release 0.02.
+ * Author: Florian Fainelli florian@openwrt.org
+ * use the Linux watchdog/timer APIs
+ *
+ * Release 0.03.
+ * Author: Mathias Adam <m.adam--linux@adamis.de>
+ * make it a generic gpio watchdog driver
+ *
+ * The Watchdog is configured to reset the MTX-1
+ * if it is not triggered for 100 seconds.
+ * It should not be triggered more often than 1.6 seconds.
+ *
+ * A timer triggers the watchdog every 5 seconds, until
+ * it is opened for the first time. After the first open
+ * it MUST be triggered every 2..95 seconds.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+#include <linux/old_gpio_wdt.h>
+
+static int ticks = 100 * HZ;
+
+static struct {
+ struct completion stop;
+ spinlock_t lock;
+ int running;
+ struct timer_list timer;
+ int queue;
+ int default_ticks;
+ unsigned long inuse;
+ unsigned gpio;
+ unsigned int gstate;
+ int interval;
+ int first_interval;
+} gpio_wdt_device;
+
+static void gpio_wdt_trigger(unsigned long unused)
+{
+ spin_lock(&gpio_wdt_device.lock);
+ if (gpio_wdt_device.running && ticks > 0)
+ ticks -= gpio_wdt_device.interval;
+
+ /* toggle wdt gpio */
+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
+
+ if (gpio_wdt_device.queue && ticks > 0)
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
+ else
+ complete(&gpio_wdt_device.stop);
+ spin_unlock(&gpio_wdt_device.lock);
+}
+
+static void gpio_wdt_reset(void)
+{
+ ticks = gpio_wdt_device.default_ticks;
+}
+
+
+static void gpio_wdt_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
+ if (!gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 1;
+ gpio_wdt_device.gstate = 1;
+ gpio_set_value(gpio_wdt_device.gpio, 1);
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
+ }
+ gpio_wdt_device.running++;
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
+}
+
+static int gpio_wdt_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
+ if (gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 0;
+ gpio_wdt_device.gstate = 0;
+ gpio_set_value(gpio_wdt_device.gpio, 0);
+ }
+ ticks = gpio_wdt_device.default_ticks;
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
+ return 0;
+}
+
+/* Filesystem functions */
+
+static int gpio_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
+ return -EBUSY;
+ return nonseekable_open(inode, file);
+}
+
+
+static int gpio_wdt_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &gpio_wdt_device.inuse);
+ return 0;
+}
+
+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = (int __user *)argp;
+ unsigned int value;
+ static const struct watchdog_info ident = {
+ .options = WDIOF_CARDRESET,
+ .identity = "GPIO WDT",
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ break;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ put_user(0, p);
+ break;
+ case WDIOC_SETOPTIONS:
+ if (get_user(value, p))
+ return -EFAULT;
+ if (value & WDIOS_ENABLECARD)
+ gpio_wdt_start();
+ else if (value & WDIOS_DISABLECARD)
+ gpio_wdt_stop();
+ else
+ return -EINVAL;
+ return 0;
+ case WDIOC_KEEPALIVE:
+ gpio_wdt_reset();
+ break;
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+
+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos)
+{
+ if (!count)
+ return -EIO;
+ gpio_wdt_reset();
+ return count;
+}
+
+static const struct file_operations gpio_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .unlocked_ioctl = gpio_wdt_ioctl,
+ .open = gpio_wdt_open,
+ .write = gpio_wdt_write,
+ .release = gpio_wdt_release,
+};
+
+
+static struct miscdevice gpio_wdt_misc = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &gpio_wdt_fops,
+};
+
+
+static int gpio_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
+
+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
+ gpio_wdt_device.interval = gpio_wdt_data->interval;
+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
+ if (gpio_wdt_device.first_interval <= 0) {
+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
+ }
+
+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request gpio");
+ return ret;
+ }
+
+ spin_lock_init(&gpio_wdt_device.lock);
+ init_completion(&gpio_wdt_device.stop);
+ gpio_wdt_device.queue = 0;
+ clear_bit(0, &gpio_wdt_device.inuse);
+ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
+ gpio_wdt_device.default_ticks = ticks;
+
+ gpio_wdt_start();
+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
+ return 0;
+}
+
+static int gpio_wdt_remove(struct platform_device *pdev)
+{
+ /* FIXME: do we need to lock this test ? */
+ if (gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 0;
+ wait_for_completion(&gpio_wdt_device.stop);
+ }
+
+ gpio_free(gpio_wdt_device.gpio);
+ misc_deregister(&gpio_wdt_misc);
+ return 0;
+}
+
+static struct platform_driver gpio_wdt_driver = {
+ .probe = gpio_wdt_probe,
+ .remove = gpio_wdt_remove,
+ .driver.name = "gpio-wdt",
+ .driver.owner = THIS_MODULE,
+};
+
+static int __init gpio_wdt_init(void)
+{
+ return platform_driver_register(&gpio_wdt_driver);
+}
+arch_initcall(gpio_wdt_init);
+
+/*
+ * We do wdt initialization in two steps: arch_initcall probes the wdt
+ * very early to start pinging the watchdog (misc devices are not yet
+ * available), and later module_init() just registers the misc device.
+ */
+static int gpio_wdt_init_late(void)
+{
+ int ret;
+
+ ret = misc_register(&gpio_wdt_misc);
+ if (ret < 0) {
+ pr_err("GPIO_WDT: failed to register misc device\n");
+ return ret;
+ }
+ return 0;
+}
+#ifndef MODULE
+module_init(gpio_wdt_init_late);
+#endif
+
+static void __exit gpio_wdt_exit(void)
+{
+ platform_driver_unregister(&gpio_wdt_driver);
+}
+module_exit(gpio_wdt_exit);
+
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:gpio-wdt");
--- /dev/null
+++ b/include/linux/old_gpio_wdt.h
@@ -0,0 +1,21 @@
+/*
+ * Definitions for the GPIO watchdog driver
+ *
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_WDT_H_
+#define _GPIO_WDT_H_
+
+struct gpio_wdt_platform_data {
+ int gpio; /* GPIO line number */
+ int interval; /* watchdog reset interval in system ticks */
+ int first_interval; /* first wd reset interval in system ticks */
+};
+
+#endif /* _GPIO_WDT_H_ */

30
target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
Unescape Escape View File

@ -1,30 +0,0 @@
From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 8 Apr 2015 06:58:11 +0200
Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
If SoC has a CardBus we can set resources of device at slot 1 only. It's
impossigle to set bridge resources as it simply overwrites device 1
configuration and usually results in Data bus error-s.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/ssb/driver_pcicore.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
SSB_WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
+ /* CardBus SoCs allow configuring dev 1 resources only */
+ if (extpci_core->cardbusmode && dev != 1 &&
+ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
+ goto out;
addr = get_cfgspace_addr(pc, bus, dev, func, off);
if (unlikely(!addr))
goto out;

233
target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch
Unescape Escape View File

@ -1,233 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 18 Dec 2015 07:51:08 +0100
Subject: [PATCH] Revert "bcma: switch GPIO portions to use GPIOLIB_IRQCHIP"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This reverts commit 74f4e0cc61080f63f28e8d519bdf437957e64217.
On BCM47XX (MIPS) bcma_bus_get_host_dev returns NULL which results in:
[ 0.157054] missing gpiochip .dev parent pointer
[ 0.157287] bcma: bus0: Error registering GPIO driver: -22
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/bcma/Kconfig | 2 +-
drivers/bcma/driver_gpio.c | 92 +++++++++++++++++++----------
include/linux/bcma/bcma_driver_chipcommon.h | 1 +
3 files changed, 64 insertions(+), 31 deletions(-)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -104,7 +104,7 @@ config BCMA_DRIVER_GMAC_CMN
config BCMA_DRIVER_GPIO
bool "BCMA GPIO driver"
depends on BCMA && GPIOLIB
- select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
+ select IRQ_DOMAIN if BCMA_HOST_SOC
help
Driver to provide access to the GPIO pins of the bcma bus.
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -8,8 +8,10 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-#include <linux/gpio/driver.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
@@ -72,11 +74,19 @@ static void bcma_gpio_free(struct gpio_c
}
#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcma_drv_cc *cc = gpiochip_get_data(chip);
+
+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+ return irq_find_mapping(cc->irq_domain, gpio);
+ else
+ return -EINVAL;
+}
static void bcma_gpio_irq_unmask(struct irq_data *d)
{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct bcma_drv_cc *cc = gpiochip_get_data(gc);
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
int gpio = irqd_to_hwirq(d);
u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
@@ -86,8 +96,7 @@ static void bcma_gpio_irq_unmask(struct
static void bcma_gpio_irq_mask(struct irq_data *d)
{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct bcma_drv_cc *cc = gpiochip_get_data(gc);
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
int gpio = irqd_to_hwirq(d);
bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
@@ -102,7 +111,6 @@ static struct irq_chip bcma_gpio_irq_chi
static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
{
struct bcma_drv_cc *cc = dev_id;
- struct gpio_chip *gc = &cc->gpio;
u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
@@ -112,58 +120,81 @@ static irqreturn_t bcma_gpio_irq_handler
if (!irqs)
return IRQ_NONE;
- for_each_set_bit(gpio, &irqs, gc->ngpio)
- generic_handle_irq(irq_find_mapping(gc->irqdomain, gpio));
+ for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
+ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
return IRQ_HANDLED;
}
-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
- int hwirq, err;
+ int gpio, hwirq, err;
if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
return 0;
+ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
+ &irq_domain_simple_ops, cc);
+ if (!cc->irq_domain) {
+ err = -ENODEV;
+ goto err_irq_domain;
+ }
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_create_mapping(cc->irq_domain, gpio);
+
+ irq_set_chip_data(irq, cc);
+ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
+ handle_simple_irq);
+ }
+
hwirq = bcma_core_irq(cc->core, 0);
err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
cc);
if (err)
- return err;
+ goto err_req_irq;
bcma_chipco_gpio_intmask(cc, ~0, 0);
bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
- err = gpiochip_irqchip_add(chip,
- &bcma_gpio_irq_chip,
- 0,
- handle_simple_irq,
- IRQ_TYPE_NONE);
- if (err) {
- free_irq(hwirq, cc);
- return err;
- }
-
return 0;
+
+err_req_irq:
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
+err_irq_domain:
+ return err;
}
-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
{
+ struct gpio_chip *chip = &cc->gpio;
+ int gpio;
+
if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
return;
bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
free_irq(bcma_core_irq(cc->core, 0), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
}
#else
-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
{
return 0;
}
-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
{
}
#endif
@@ -182,8 +213,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
- chip->owner = THIS_MODULE;
- chip->parent = bus->dev;
+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
+ chip->to_irq = bcma_gpio_to_irq;
+#endif
#if IS_BUILTIN(CONFIG_OF)
chip->of_node = cc->core->dev.of_node;
#endif
@@ -212,13 +244,13 @@ int bcma_gpio_init(struct bcma_drv_cc *c
else
chip->base = -1;
- err = gpiochip_add_data(chip, cc);
+ err = bcma_gpio_irq_domain_init(cc);
if (err)
return err;
- err = bcma_gpio_irq_init(cc);
+ err = gpiochip_add_data(chip, cc);
if (err) {
- gpiochip_remove(chip);
+ bcma_gpio_irq_domain_exit(cc);
return err;
}
@@ -227,7 +259,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
int bcma_gpio_unregister(struct bcma_drv_cc *cc)
{
- bcma_gpio_irq_exit(cc);
+ bcma_gpio_irq_domain_exit(cc);
gpiochip_remove(&cc->gpio);
return 0;
}
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -645,6 +645,7 @@ struct bcma_drv_cc {
spinlock_t gpio_lock;
#ifdef CONFIG_BCMA_DRIVER_GPIO
struct gpio_chip gpio;
+ struct irq_domain *irq_domain;
#endif
};

46
target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch
Unescape Escape View File

@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
}
@@ -1251,6 +1258,15 @@ static int yenta_probe(struct pci_dev *d
dev_info(&dev->dev, "Socket status: %08x\n",
cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

11
target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch
Unescape Escape View File

@ -1,11 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -389,7 +389,7 @@ static void ssb_pcicore_init_hostmode(st
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
+ mdelay(300);
register_pci_controller(&ssb_pcicore_controller);
}

22
target/linux/bcm47xx/patches-4.14/999-wl_exports.patch
Unescape Escape View File

@ -1,22 +0,0 @@
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -34,7 +34,8 @@ struct nvram_header {
u32 config_ncdl; /* ncdl values for memc */
};
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static size_t nvram_len;
static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
static int cfe_env;
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
Write Preview
Loading…
Cancel
Save