Browse Source

uboot-rockchip: add NanoPi R2S support

Add support for the FriendlyARM NanoPi R2S.

Signed-off-by: David Bauer <mail@david-bauer.net>
master
David Bauer 2 years ago
parent
commit
04f06787f1
  1. 31
      package/boot/uboot-rockchip/Makefile
  2. 32
      package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch
  3. 530
      package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
  4. 149
      package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c
  5. 72
      package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h

31
package/boot/uboot-rockchip/Makefile

@ -20,6 +20,23 @@ define U-Boot/Default
HIDDEN:=1
endef
# RK3328 boards
define U-Boot/nanopi-r2s-rk3328
BUILD_SUBTARGET:=armv8
NAME:=NanoPi R2S
BUILD_DEVICES:= \
friendlyarm_nanopi-r2s
DEPENDS:=+PACKAGE_u-boot-nanopi-r2s-rk3328:arm-trusted-firmware-rockchip
PKG_BUILD_DEPENDS:=arm-trusted-firmware-rockchip
ATF:=rk3328_bl31.elf
OF_PLATDATA:=$(1)
endef
# RK3399 boards
define U-Boot/rockpro64-rk3399
BUILD_SUBTARGET:=armv8
NAME:=RockPro64
@ -27,19 +44,29 @@ define U-Boot/rockpro64-rk3399
pine64_rockpro64
DEPENDS:=+PACKAGE_u-boot-rockpro64-rk3399:arm-trusted-firmware-rockchip
PKG_BUILD_DEPENDS:=arm-trusted-firmware-rockchip
ATF:=rk3399_bl31.elf
endef
UBOOT_TARGETS := \
rockpro64-rk3399
rockpro64-rk3399 \
nanopi-r2s-rk3328
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
UBOOT_MAKE_FLAGS += \
BL31=$(STAGING_DIR_IMAGE)/rk3399_bl31.elf
BL31=$(STAGING_DIR_IMAGE)/$(ATF)
define Build/Configure
$(call Build/Configure/U-Boot)
ifneq ($(OF_PLATDATA),)
mkdir -p $(PKG_BUILD_DIR)/tpl/dts
mkdir -p $(PKG_BUILD_DIR)/include/generated
$(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-platdata.c $(PKG_BUILD_DIR)/tpl/dts/dt-platdata.c
$(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-structs-gen.h $(PKG_BUILD_DIR)/include/generated/dt-structs-gen.h
endif
$(SED) 's#CONFIG_MKIMAGE_DTC_PATH=.*#CONFIG_MKIMAGE_DTC_PATH="$(PKG_BUILD_DIR)/scripts/dtc/dtc"#g' $(PKG_BUILD_DIR)/.config
echo 'CONFIG_IDENT_STRING=" OpenWrt"' >> $(PKG_BUILD_DIR)/.config
endef

32
package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch

@ -0,0 +1,32 @@
From 55273cf6079ddd3b006da69f0113c2c66c03f17e Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Tue, 14 Jul 2020 22:44:22 +0200
Subject: [PATCH] spl: remove dtoc of-pdata generation
Remove the dtoc of-pdata generation. This generation is dependant on
libpython-dev. As OpenWrt does not ship with this dependency, use
pre-generated pdata files and remove the generation from the
build-process.
This only affects RK3328 boards.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
scripts/Makefile.spl | 6 ------
1 file changed, 6 deletions(-)
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -320,12 +320,6 @@ PHONY += dts_dir
dts_dir:
$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
-include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
- $(call if_changed,dtoch)
-
-$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
- $(call if_changed,dtocc)
-
ifdef CONFIG_SAMSUNG
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs

530
package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch

@ -0,0 +1,530 @@
From 67f4c228c2bf515386cd54073104dc2e6eae85ea Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Fri, 10 Jul 2020 14:58:30 +0200
Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
This adds support for the NanoPi R2S from FriendlyArm.
Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (LAN)
USB 2.0 Host Port
MicroSD slot
Reset button
WAN - LAN - SYS LED
Signed-off-by: David Bauer <mail@david-bauer.net>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 34 +++
arch/arm/dts/rk3328-nanopi-r2s.dts | 334 +++++++++++++++++++++
board/rockchip/evb_rk3328/MAINTAINERS | 7 +
configs/nanopi-r2s-rk3328_defconfig | 99 ++++++
5 files changed, 475 insertions(+)
create mode 100644 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-nanopi-r2s.dts
create mode 100644 configs/nanopi-r2s-rk3328_defconfig
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
rk3328-evb.dtb \
+ rk3328-nanopi-r2s.dtb \
rk3328-roc-cc.dtb \
rk3328-rock64.dtb \
rk3328-rock-pi-e.dtb
--- /dev/null
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2020 David Bauer
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr4-666.dtsi"
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+ };
+};
+
+&gpio0 {
+ u-boot,dm-spl;
+};
+
+&pinctrl {
+ u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+ u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+ u-boot,dm-spl;
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+ u-boot,dm-spl;
+};
--- /dev/null
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+ model = "FriendlyARM NanoPi R2S";
+ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sdio: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_vcc_pin>;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sdio";
+ regulator-settling-time-us = <5000>;
+ regulator-type = "voltage";
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ sys {
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:red:sys";
+ };
+
+ lan {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:lan";
+ };
+
+ wan {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:wan";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ reset {
+ label = "Reset Button";
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <50>;
+ };
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_io>;
+ phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,aal;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x24>;
+ rx_delay = <0x18>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_sdio>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+ leds {
+ led_pins: led-pins {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ button {
+ button_pins: button-pins {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd {
+ sdio_vcc_pin: sdio-vcc-pin {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
--- a/board/rockchip/evb_rk3328/MAINTAINERS
+++ b/board/rockchip/evb_rk3328/MAINTAINERS
@@ -5,6 +5,13 @@ F: board/rockchip/evb_rk3328
F: include/configs/evb_rk3328.h
F: configs/evb-rk3328_defconfig
+NANOPI-R2S-RK3328
+M: David Bauer <mail@david-bauer.net>
+S: Maintained
+F: configs/nanopi-r2s-rk3328_defconfig
+F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+F: arch/arm/dts/rk3328-nanopi-r2s.dts
+
ROC-RK3328-CC
M: Loic Devulder <ldevulder@suse.com>
M: Chen-Yu Tsai <wens@csie.org>
--- /dev/null
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -0,0 +1,99 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SMBIOS_PRODUCT_NAME="nanopi_r2s_rk3328"
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_TPL_OF_PLATDATA=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_TPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_TPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+# CONFIG_TPL_SYSRESET is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
+CONFIG_SMBIOS_MANUFACTURER="pine64"

149
package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c

@ -0,0 +1,149 @@
/*
* DO NOT MODIFY
*
* This file was generated by dtoc from a .dtb (device tree binary) file.
*/
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
static const struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = {
.reg = {0xff100000, 0x1000},
};
U_BOOT_DEVICE(syscon_at_ff100000) = {
.name = "rockchip_rk3328_grf",
.platdata = &dtv_syscon_at_ff100000,
.platdata_size = sizeof(dtv_syscon_at_ff100000),
};
static const struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = {
.reg = {0xff440000, 0x1000},
.rockchip_grf = 0x3a,
};
U_BOOT_DEVICE(clock_controller_at_ff440000) = {
.name = "rockchip_rk3328_cru",
.platdata = &dtv_clock_controller_at_ff440000,
.platdata_size = sizeof(dtv_clock_controller_at_ff440000),
};
static const struct dtd_rockchip_rk3328_uart dtv_serial_at_ff130000 = {
.clock_frequency = 0x16e3600,
.clocks = {
{&dtv_clock_controller_at_ff440000, {40}},
{&dtv_clock_controller_at_ff440000, {212}},},
.dma_names = {"tx", "rx"},
.dmas = {0x10, 0x6, 0x10, 0x7},
.interrupts = {0x0, 0x39, 0x4},
.pinctrl_0 = 0x26,
.pinctrl_names = "default",
.reg = {0xff130000, 0x100},
.reg_io_width = 0x4,
.reg_shift = 0x2,
};
U_BOOT_DEVICE(serial_at_ff130000) = {
.name = "rockchip_rk3328_uart",
.platdata = &dtv_serial_at_ff130000,
.platdata_size = sizeof(dtv_serial_at_ff130000),
};
static const struct dtd_rockchip_rk3328_dw_mshc dtv_mmc_at_ff500000 = {
.bus_width = 0x4,
.cap_mmc_highspeed = true,
.cap_sd_highspeed = true,
.clocks = {
{&dtv_clock_controller_at_ff440000, {317}},
{&dtv_clock_controller_at_ff440000, {33}},
{&dtv_clock_controller_at_ff440000, {74}},
{&dtv_clock_controller_at_ff440000, {78}},},
.disable_wp = true,
.fifo_depth = 0x100,
.interrupts = {0x0, 0xc, 0x4},
.max_frequency = 0x8f0d180,
.pinctrl_0 = {0x47, 0x48, 0x49, 0x4a},
.pinctrl_names = "default",
.reg = {0xff500000, 0x4000},
.u_boot_spl_fifo_mode = true,
.vmmc_supply = 0x4b,
.vqmmc_supply = 0x1e,
};
U_BOOT_DEVICE(mmc_at_ff500000) = {
.name = "rockchip_rk3328_dw_mshc",
.platdata = &dtv_mmc_at_ff500000,
.platdata_size = sizeof(dtv_mmc_at_ff500000),
};
static const struct dtd_rockchip_rk3328_pinctrl dtv_pinctrl = {
.ranges = true,
.rockchip_grf = 0x3a,
};
U_BOOT_DEVICE(pinctrl) = {
.name = "rockchip_rk3328_pinctrl",
.platdata = &dtv_pinctrl,
.platdata_size = sizeof(dtv_pinctrl),
};
static const struct dtd_rockchip_gpio_bank dtv_gpio0_at_ff210000 = {
.clocks = {
{&dtv_clock_controller_at_ff440000, {200}},},
.gpio_controller = true,
.interrupt_controller = true,
.interrupts = {0x0, 0x33, 0x4},
.reg = {0xff210000, 0x100},
};
U_BOOT_DEVICE(gpio0_at_ff210000) = {
.name = "rockchip_gpio_bank",
.platdata = &dtv_gpio0_at_ff210000,
.platdata_size = sizeof(dtv_gpio0_at_ff210000),
};
static const struct dtd_regulator_fixed dtv_sdmmc_regulator = {
.gpio = {0x60, 0x1e, 0x1},
.pinctrl_0 = 0x61,
.pinctrl_names = "default",
.regulator_max_microvolt = 0x325aa0,
.regulator_min_microvolt = 0x325aa0,
.regulator_name = "vcc_sd",
.vin_supply = 0x1c,
};
U_BOOT_DEVICE(sdmmc_regulator) = {
.name = "regulator_fixed",
.platdata = &dtv_sdmmc_regulator,
.platdata_size = sizeof(dtv_sdmmc_regulator),
};
static const struct dtd_rockchip_rk3328_dmc dtv_dmc = {
.reg = {0xff400000, 0x1000, 0xff780000, 0x3000, 0xff100000, 0x1000, 0xff440000, 0x1000,
0xff720000, 0x1000, 0xff798000, 0x1000},
.rockchip_sdram_params = {0x1, 0xa, 0x2, 0x1, 0x0, 0x0, 0x11, 0x0,
0x11, 0x0, 0x0, 0x94291288, 0x0, 0x27, 0x462, 0x15,
0x242, 0xff, 0x14d, 0x0, 0x1, 0x0, 0x0, 0x0,
0x43049010, 0x64, 0x28003b, 0xd0, 0x20053, 0xd4, 0x220000, 0xd8,
0x100, 0xdc, 0x40000, 0xe0, 0x0, 0xe4, 0x110000, 0xe8,
0x420, 0xec, 0x400, 0xf4, 0xf011f, 0x100, 0x9060b06, 0x104,
0x20209, 0x108, 0x505040a, 0x10c, 0x40400c, 0x110, 0x5030206, 0x114,
0x3030202, 0x120, 0x3030b03, 0x124, 0x20208, 0x180, 0x1000040, 0x184,
0x0, 0x190, 0x7030003, 0x198, 0x5001100, 0x1a0, 0xc0400003, 0x240,
0x6000604, 0x244, 0x201, 0x250, 0xf00, 0x490, 0x1, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0x4, 0xc, 0x28, 0xa, 0x2c,
0x0, 0x30, 0x9, 0xffffffff, 0xffffffff, 0x77, 0x88, 0x79,
0x79, 0x87, 0x97, 0x87, 0x78, 0x77, 0x78, 0x87,
0x88, 0x87, 0x87, 0x77, 0x78, 0x78, 0x78, 0x78,
0x78, 0x78, 0x78, 0x78, 0x78, 0x69, 0x9, 0x77,
0x78, 0x77, 0x78, 0x77, 0x78, 0x77, 0x78, 0x77,
0x79, 0x9, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
0x78, 0x78, 0x78, 0x69, 0x9, 0x77, 0x78, 0x77,
0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x79, 0x9,
0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
0x78, 0x69, 0x9, 0x77, 0x78, 0x77, 0x78, 0x77,
0x78, 0x77, 0x78, 0x77, 0x79, 0x9, 0x78, 0x78,
0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x69,
0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77,
0x77, 0x77, 0x79, 0x9},
};
U_BOOT_DEVICE(dmc) = {
.name = "rockchip_rk3328_dmc",
.platdata = &dtv_dmc,
.platdata_size = sizeof(dtv_dmc),
};

72
package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h

@ -0,0 +1,72 @@
/*
* DO NOT MODIFY
*
* This file was generated by dtoc from a .dtb (device tree binary) file.
*/
#include <stdbool.h>
#include <linux/libfdt.h>
struct dtd_regulator_fixed {
fdt32_t gpio[3];
fdt32_t pinctrl_0;
const char * pinctrl_names;
fdt32_t regulator_max_microvolt;
fdt32_t regulator_min_microvolt;
const char * regulator_name;
fdt32_t vin_supply;
};
struct dtd_rockchip_gpio_bank {
struct phandle_1_arg clocks[1];
bool gpio_controller;
bool interrupt_controller;
fdt32_t interrupts[3];
fdt64_t reg[2];
};
struct dtd_rockchip_rk3328_cru {
fdt64_t reg[2];
fdt32_t rockchip_grf;
};
struct dtd_rockchip_rk3328_dmc {
fdt64_t reg[12];
fdt32_t rockchip_sdram_params[196];
};
struct dtd_rockchip_rk3328_dw_mshc {
fdt32_t bus_width;
bool cap_mmc_highspeed;
bool cap_sd_highspeed;
struct phandle_1_arg clocks[4];
bool disable_wp;
fdt32_t fifo_depth;
fdt32_t interrupts[3];
fdt32_t max_frequency;
fdt32_t pinctrl_0[4];
const char * pinctrl_names;
fdt64_t reg[2];
bool u_boot_spl_fifo_mode;
fdt32_t vmmc_supply;
fdt32_t vqmmc_supply;
};
struct dtd_rockchip_rk3328_grf {
fdt64_t reg[2];
};
struct dtd_rockchip_rk3328_pinctrl {
bool ranges;
fdt32_t rockchip_grf;
};
struct dtd_rockchip_rk3328_uart {
fdt32_t clock_frequency;
struct phandle_1_arg clocks[2];
const char * dma_names[2];
fdt32_t dmas[4];
fdt32_t interrupts[3];
fdt32_t pinctrl_0;
const char * pinctrl_names;
fdt64_t reg[2];
fdt32_t reg_io_width;
fdt32_t reg_shift;
};
#define dtd_syscon dtd_rockchip_rk3328_cru
#define dtd_simple_mfd dtd_rockchip_rk3328_grf
#define dtd_snps_dw_apb_uart dtd_rockchip_rk3328_uart
#define dtd_rockchip_cru dtd_rockchip_rk3328_cru
#define dtd_rockchip_rk3288_dw_mshc dtd_rockchip_rk3328_dw_mshc
Loading…
Cancel
Save