ar71xx: add support for YunCore AP90Q
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2. Short specification: - 650/600/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz with external PA, up to 29 dBm - 2x internal 5 dBi omni antennas - 4x LED, 1x button - UART (JP1) header on PCB Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Flash instruction under vendor fimrware, using telnet/SSH: 1. Connect PC with 192.168.1.x address to WAN port 2. Power up device, enter failsafe mode with button (no LED indicator!) 3. Change root password and reboot (mount_root, passwd ..., reboot -f) 4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP 5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 6. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9f050000" - mtd erase firmware - mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>v19.07.3_mercusys_ac12_duma
Piotr Dymacz
8 years ago
committed by
John Crispin
parent
16afa08d19
commit
01dda0659e
@ -0,0 +1,123 @@
|
||||
/*
|
||||
* YunCore AP90Q board support
|
||||
*
|
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define AP90Q_GPIO_LED_WAN 4
|
||||
#define AP90Q_GPIO_LED_WLAN 12
|
||||
#define AP90Q_GPIO_LED_LAN 16
|
||||
|
||||
#define AP90Q_GPIO_BTN_RESET 17
|
||||
|
||||
#define AP90Q_KEYS_POLL_INTERVAL 20
|
||||
#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
|
||||
|
||||
static struct gpio_led ap90q_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "ap90q:green:lan",
|
||||
.gpio = AP90Q_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "ap90q:green:wan",
|
||||
.gpio = AP90Q_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "ap90q:green:wlan",
|
||||
.gpio = AP90Q_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = AP90Q_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init ap90q_gpio_setup(void)
|
||||
{
|
||||
/* For LED on GPIO4 */
|
||||
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
||||
|
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
|
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
|
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
|
||||
|
||||
/* Mute LEDs on boot */
|
||||
gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
|
||||
gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
|
||||
|
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
|
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
|
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
|
||||
ap90q_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(ap90q_gpio_keys),
|
||||
ap90q_gpio_keys);
|
||||
}
|
||||
|
||||
static void __init ap90q_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ap90q_gpio_setup();
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
|
||||
/* LAN */
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* WAN */
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_wmac(art, NULL);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);
|
||||
Loading…
Reference in New Issue