openwrt/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca9557.dtsi"

/ {
	compatible = "zyxel,nbg6716", "qca,qca9558";
	model = "ZyXEL NBG6716";

	chosen {
		bootargs = "console=ttyS0,115200n8";
	};

	aliases {
		led-boot = &power;
		led-failsafe = &power;
		led-running = &power;
		led-upgrade = &power;
	};

	leds {
		compatible = "gpio-leds";

		power: power {
			label = "nbg6716:white:power";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		wan {
			label = "nbg6716:white:internet";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
		};

		usb1 {
			label = "nbg6716:white:usb1";
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "usbport";
			trigger-sources = <&hub_port0>;
		};

		usb2 {
			label = "nbg6716:white:usb2";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "usbport";
			trigger-sources = <&hub_port1>;
		};

		wifi2 {
			label = "nbg6716:white:wifi2";
			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		wifi5 {
			label = "nbg6716:white:wifi5";
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		wps {
			label = "nbg6716:white:wps";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

	        wifi_button {
                        label = "WiFi button";
			linux,code = <KEY_RFKILL>;
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

	        usb1 {
			label = "USB1 eject button";
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

	        usb2 {
                        label = "USB2 eject button";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		wps {
			label = "WPS button";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};
};

&gpio {
	gpio_usb_power {
		gpio-hog;
		gpios = <16 0>;
		output-high;
		line-name = "nbg6716:power:usb";
	};
};

&uart {
	status = "okay";
};

&spi {
	status = "okay";
	num-cs = <1>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			uboot: partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;
			};

			uboot_env: partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x010000>;
			};

			art: partition@50000 {
				label = "art";
				reg = <0x050000 0x010000>;
				read-only;
			};

			partition@60000 {
				label = "nbu";
				reg = <0x060000 0xfa0000>;
			};
		};
	};
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "zyxel_rfsd";
			reg = <0x0 0x200000>;
		};

		partition@200000 {
			label = "romd";
			reg = <0x200000 0x200000>;
		};

		partition@400000 {
			label = "header";
			reg = <0x400000 0x100000>;
		};

		firmware@500000 {
			label = "firmware";
			reg = <0x500000 0x7b00000>;
		};

		partition@500000 {
			label = "kernel";
			reg = <0x500000 0x400000>;
		};

		partition@900000 {
			label = "ubi";
			reg = <0x900000 0x7700000>;
		};
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <17>;
		phy-mode = "rgmii-id";
	};

	switch0@1f {
		compatible = "qca,ar8327";
		reg = <0x1f>;
		qca,ar8327-initvals = <
			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
			0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
			0x10 0x81000080 /* POWER_ON_STRIP */
			0x50 0xffb7ffb7 /* LED_CTRL0 */
			0x54 0xffb7ffb7 /* LED_CTRL1 */
			0x58 0xffb7ffb7 /* LED_CTRL2 */
			0x5c 0x03ffff00 /* LED_CTRL3 */
			0x7c 0x0000007e /* PORT0_STATUS */
			0x94 0x0000007e /* PORT6 STATUS */
			>;
	};
};

&mdio1 {
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
		phy-mode = "sgmii";
	};
};


&eth0 {
	status = "okay";

	pll-data = <0xa6000000 0x00000101 0x00001616>;
	phy-handle = <&phy0>;
	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&eth1 {
	status = "okay";

	pll-data = <0x03000101 0x00000101 0x00001616>;
	phy-handle = <&phy1>;
	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gpio {
	status = "okay";
};

&wmac {
	status = "okay";
};

&pcie1 {
        status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0 0 0 0 0>;
		qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
	};
};

&usb_phy0 {
        status = "okay";
};

&usb_phy1 {
        status = "okay";
};

&usb0 {
        status = "okay";

	hub_port0: port@1 {
		reg = <1>;
		#trigger-source-cells = <0>;
	};

};

&usb1 {
        status = "okay";

	hub_port1: port@1 {
		reg = <1>;
		#trigger-source-cells = <0>;
	};
};