You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/generic/pending-5.4/306-mips_mem_functions_perf...

107 lines
3.1 KiB
Diff

From: Felix Fietkau <nbd@nbd.name>
Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy for better performance and (in some instances) smaller code
lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
arch/mips/boot/compressed/Makefile | 3 ++-
arch/mips/include/asm/string.h | 38 ++++++++++++++++++++++++++++++++++++++
arch/mips/lib/Makefile | 2 +-
arch/mips/lib/memcmp.c | 22 ++++++++++++++++++++++
4 files changed, 63 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/lib/memcmp.c
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(filter-out -pg, $(KBU
KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
- -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+ -D__ZBOOT__
KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
--- a/arch/mips/include/asm/string.h
+++ b/arch/mips/include/asm/string.h
@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+#ifndef __ZBOOT__
+#define memset(__s, __c, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memset((__s), (__c), __len); \
+ else \
+ __ret = __builtin_memset((__s), (__c), __len); \
+ __ret; \
+})
+
+#define memcpy(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memcpy((dst), (src), __len); \
+ else \
+ __ret = __builtin_memcpy((dst), (src), __len); \
+ __ret; \
+})
+
+#define memmove(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memmove((dst), (src), __len); \
+ else \
+ __ret = __builtin_memmove((dst), (src), __len); \
+ __ret; \
+})
+
+#define __HAVE_ARCH_MEMCMP
+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+#endif
+
#endif /* _ASM_STRING_H */
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -5,7 +5,7 @@
lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
mips-atomic.o strncpy_user.o \
- strnlen_user.o uncached.o
+ strnlen_user.o uncached.o memcmp.o
kernel: add support for kernel 5.4 The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years ago
obj-y += iomap_copy.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+++ b/arch/mips/lib/memcmp.c
@@ -0,0 +1,22 @@
+/*
+ * copied from linux/lib/string.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#undef memcmp
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res = 0;
+
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ if ((res = *su1 - *su2) != 0)
+ break;
+ return res;
+}
+EXPORT_SYMBOL(memcmp);
+