imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
|
|
|
arm: dts: apalis-ixora: Add status LEDs aliases
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Petr Štetiar <ynezz@true.cz>
|
|
|
|
|
|
|
|
|
|
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
|
|
|
|
|
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
|
|
|
|
|
@@ -60,6 +60,10 @@
|
|
|
|
|
i2c2 = &i2c2;
|
|
|
|
|
rtc0 = &rtc_i2c;
|
|
|
|
|
rtc1 = &snvs_rtc;
|
|
|
|
|
+ led-boot = &led_boot;
|
|
|
|
|
+ led-failsafe = &led_failsafe;
|
|
|
|
|
+ led-running = &led_running;
|
|
|
|
|
+ led-upgrade = &led_upgrade;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
|
@@ -127,22 +131,22 @@
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_leds_ixora>;
|
|
|
|
|
|
|
|
|
|
- led4-green {
|
|
|
|
|
+ led_running: led4-green {
|
|
|
|
|
label = "LED_4_GREEN";
|
|
|
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led4-red {
|
|
|
|
|
+ led_upgrade: led4-red {
|
|
|
|
|
label = "LED_4_RED";
|
|
|
|
|
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led5-green {
|
|
|
|
|
+ led_boot: led5-green {
|
|
|
|
|
label = "LED_5_GREEN";
|
|
|
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led5-red {
|
|
|
|
|
+ led_failsafe: led5-red {
|
|
|
|
|
label = "LED_5_RED";
|
|
|
|
|
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
|
|
|
|
|
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
|
|
|
|
|
@@ -61,6 +61,10 @@
|
|
|
|
|
i2c2 = &i2c2;
|
|
|
|
|
rtc0 = &rtc_i2c;
|
|
|
|
|
rtc1 = &snvs_rtc;
|
|
|
|
|
+ led-boot = &led_boot;
|
|
|
|
|
+ led-failsafe = &led_failsafe;
|
|
|
|
|
+ led-running = &led_running;
|
|
|
|
|
+ led-upgrade = &led_upgrade;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
|
@@ -128,22 +132,22 @@
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_leds_ixora>;
|
|
|
|
|
|
|
|
|
|
- led4-green {
|
|
|
|
|
+ led_running: led4-green {
|
|
|
|
|
label = "LED_4_GREEN";
|
|
|
|
|
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led4-red {
|
|
|
|
|
+ led_upgrade: led4-red {
|
|
|
|
|
label = "LED_4_RED";
|
|
|
|
|
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led5-green {
|
|
|
|
|
+ led_boot: led5-green {
|
|
|
|
|
label = "LED_5_GREEN";
|
|
|
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
- led5-red {
|
|
|
|
|
+ led_failsafe: led5-red {
|
|
|
|
|
label = "LED_5_RED";
|
|
|
|
|
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
