You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ar71xx/image/mikrotik.mk

62 lines
2.2 KiB
Makefile

define Device/mikrotik
PROFILES := Default
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
BOARD_NAME := routerboard
LOADER_TYPE := elf
KERNEL_NAME := vmlinux.bin.lzma
KERNEL := kernel-bin | loader-kernel
KERNEL_INITRAMFS_NAME := vmlinux-initramfs.bin.lzma
MIKROTIK_CHUNKSIZE :=
IMAGE/sysupgrade.bin/squashfs :=
endef
DEVICE_VARS += MIKROTIK_CHUNKSIZE
define Device/mikrotik-nand
$(Device/mikrotik)
IMAGE/sysupgrade.bin/squashfs = append-kernel | \
kernel2minor -s $$(MIKROTIK_CHUNKSIZE) -e -c | sysupgrade-tar kernel=$$$$@
endef
define Device/nand-64m
$(Device/mikrotik-nand)
MIKROTIK_CHUNKSIZE := 512
DEVICE_TITLE := MikroTik RouterBoard (64 MB NAND)
endef
TARGET_DEVICES += nand-64m
define Device/nand-large
$(Device/mikrotik-nand)
MIKROTIK_CHUNKSIZE := 2048
DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND)
endef
TARGET_DEVICES += nand-large
define Device/nand-large-ac
$(Device/mikrotik-nand)
MIKROTIK_CHUNKSIZE := 2048
DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND, 802.11ac)
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
SUPPORTED_DEVICES := rb-921gs-5hpacd-r2 rb-922uags-5hpacd
endef
TARGET_DEVICES += nand-large-ac
define Device/rb-nor-flash-16M
$(Device/mikrotik)
DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR)
ar71xx: complete support for RB mAP 2nD This patch adds support for the MikroTik RouterBOARD mAP 2nD https://mikrotik.com/product/RBmAP2nD Specifications: - SoC: Qualcomm QCA9531 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 2x100M (802.3af/at POE in and passive POE out on ETH2) - USB: microUSB type AB port This patch adds missing code to fully support mAP. Machfile already contained configuration for mAP 2nD, but device specific configuration like LEDs etc., was missing. Note: The POE LED works but doesn't turn on when POE passthrough is enabled, despite being configured with GPIO trigger. Installation 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
7 years ago
DEVICE_PACKAGES := rbcfg rssileds -nand-utils kmod-ledtrig-gpio
IMAGE_SIZE := 16000k
KERNEL_INSTALL := 1
SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-sxt-2nd-r3
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += rb-nor-flash-16M
define Device/rb-nor-flash-16M-ac
$(Device/rb-nor-flash-16M)
DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR, 802.11ac)
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct ath10k-firmware-qca9887-ct kmod-usb-ehci
SUPPORTED_DEVICES += rb-wapg-5hact2hnd
endef
TARGET_DEVICES += rb-nor-flash-16M-ac