You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/tools/firmware-utils/src/mktplinkfw2.c

1045 lines
23 KiB
C

/*
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This tool was based on:
* TP-Link WR941 V2 firmware checksum fixing tool.
* Copyright (C) 2008,2009 Wang Jian <lark@linux.net.cn>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h> /* for unlink() */
#include <libgen.h>
#include <getopt.h> /* for getopt() */
#include <stdarg.h>
#include <errno.h>
#include <stdbool.h>
#include <endian.h>
#include <sys/stat.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include "md5.h"
#define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
#define MD5SUM_LEN 16
struct file_info {
char *file_name; /* name of the file */
uint32_t file_size; /* length of the file */
};
struct fw_header {
uint32_t version; /* 0x00: header version */
char fw_version[48]; /* 0x04: fw version string */
uint32_t hw_id; /* 0x34: hardware id */
uint32_t hw_rev; /* 0x38: FIXME: hardware revision? */
uint32_t hw_ver_add; /* 0x3c: additional hardware version */
uint8_t md5sum1[MD5SUM_LEN]; /* 0x40 */
uint32_t unk2; /* 0x50: 0x00000000 */
uint8_t md5sum2[MD5SUM_LEN]; /* 0x54 */
uint32_t unk3; /* 0x64: 0xffffffff */
uint32_t kernel_la; /* 0x68: kernel load address */
uint32_t kernel_ep; /* 0x6c: kernel entry point */
uint32_t fw_length; /* 0x70: total length of the image */
uint32_t kernel_ofs; /* 0x74: kernel data offset */
uint32_t kernel_len; /* 0x78: kernel data length */
uint32_t rootfs_ofs; /* 0x7c: rootfs data offset */
uint32_t rootfs_len; /* 0x80: rootfs data length */
uint32_t boot_ofs; /* 0x84: bootloader offset */
uint32_t boot_len; /* 0x88: bootloader length */
uint16_t unk4; /* 0x8c: 0x55aa */
uint8_t sver_hi; /* 0x8e */
uint8_t sver_lo; /* 0x8f */
uint8_t unk5; /* 0x90: magic: 0xa5 */
uint8_t ver_hi; /* 0x91 */
uint8_t ver_mid; /* 0x92 */
uint8_t ver_lo; /* 0x93 */
uint8_t pad[364];
} __attribute__ ((packed));
struct flash_layout {
char *id;
uint32_t fw_max_len;
uint32_t kernel_la;
uint32_t kernel_ep;
uint32_t rootfs_ofs;
};
struct board_info {
char *id;
uint32_t hw_id;
uint32_t hw_rev;
uint32_t hw_ver_add;
char *layout_id;
uint32_t hdr_ver;
bool endian_swap;
};
/*
* Globals
*/
static char *ofname;
static char *progname;
static char *vendor = "TP-LINK Technologies";
static char *version = "ver. 1.0";
static char *fw_ver = "0.0.0";
static char *sver = "1.0";
static uint32_t hdr_ver = 2;
static struct board_info custom_board;
static char *board_id;
static struct board_info *board;
static char *layout_id;
static struct flash_layout *layout;
static char *opt_hw_id;
static char *opt_hw_rev;
static char *opt_hw_ver_add;
static int fw_ver_lo;
static int fw_ver_mid;
static int fw_ver_hi;
static int sver_lo;
static int sver_hi;
static struct file_info kernel_info;
static uint32_t kernel_la = 0;
static uint32_t kernel_ep = 0;
static uint32_t kernel_len = 0;
static struct file_info rootfs_info;
static uint32_t rootfs_ofs = 0;
static uint32_t rootfs_align;
static struct file_info boot_info;
static int combined;
static int strip_padding;
static int add_jffs2_eof;
static unsigned char jffs2_eof_mark[4] = {0xde, 0xad, 0xc0, 0xde};
static struct file_info inspect_info;
static int extract = 0;
char md5salt_normal[MD5SUM_LEN] = {
0xdc, 0xd7, 0x3a, 0xa5, 0xc3, 0x95, 0x98, 0xfb,
0xdc, 0xf9, 0xe7, 0xf4, 0x0e, 0xae, 0x47, 0x37,
};
char md5salt_boot[MD5SUM_LEN] = {
firmware-utils: mktplinkfw2: fix MD5 salt LEDE supports few devices using TP-Link firmware format (V2 or V3): ArcherC20i, ArcherC50, ArcherMR200, TDW8970, TDW8980, TL-WR840N v4, TL-WR841N v13 and VR200v Testing mktplinkfw2 tool with official (vendor generated) firmware files for above devices has shown an error when comparing calculated and included MD5 sum, e.g.: > mktplinkfw2 -i Archer_C20iv1_0.9.1_3.2_up_boot\(170221\)_2017-02-21_17.14.03.bin | grep -A 1 MD5Sum1 Header MD5Sum1 : 22 5a cb 92 10 d2 95 7b df 62 9a f8 62 17 37 10 (*ERROR*) --> expected : ad 19 11 d1 78 98 a7 42 5f 2e 64 da 8a 34 ec cb This problem has been verified to occur with: Archer_C20iv1_0.9.1_3.2_up_boot(170221)_2017-02-21_17.14.03.bin Archer MR200v1_0.9.1_1.1_up_boot_v004a.0 Build 160905 Rel.60037n.bin TD-W8970v3_0.9.1_2.0_up_boot(160816)_2016-08-16_10.40.57.bin TD-W8980v1_0.6.0_1.8_up_boot(150514)_2015-05-14_11.16.43.bin Archer_VR200vv2_0.2.0_0.8.0_up_boot(161202)_2016-12-05_14.39.06.bin For some images, e.g.: Archer_C50v3_EU_0.9.1_0.3_up_boot[170417-rel52298].bin TL-WR840Nv4_EU_0.9.1_4.16_up_boot[170421-rel70692].bin TL-WR841Nv13_0.9.1_3.16_up_boot(161012).bin mktplinkfw2 calculates zero MD5 so these has to be fixed separately: > mktplinkfw2 -i TL-WR841Nv13_0.9.1_3.16_up_boot\(161012\).bin | grep -A 1 MD5Sum1 Header MD5Sum1 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (*ERROR*) --> expected : 6f 1d 9b 57 5d 42 14 6d bf a2 03 9d 46 7d 55 55 It's most likely that MD5 salt used in mktplinkfw2 has been always wrong (and it's not a matter of e.g. a vendor change). Update it to fix MD5 calculation. This has been also verified to calculate MD5 correctly for other (not yet supported) devices, e.g.: Archer_C3150v2_0.1.0_0.9.1_up_boot(160812)_2016-08-12_10.52.54.bin Archer_C3200v1_0.9.1_0.1_up_boot(160704)_2016-07-04_15.48.28.bin Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Mathias Kresin <dev@kresin.me>
7 years ago
0x8c, 0xef, 0x33, 0x5f, 0xd5, 0xc5, 0xce, 0xfa,
0xac, 0x9c, 0x28, 0xda, 0xb2, 0xe9, 0x0f, 0x42,
};
static struct flash_layout layouts[] = {
{
.id = "8Mltq",
.fw_max_len = 0x7a0000,
.kernel_la = 0x80002000,
.kernel_ep = 0x80002000,
.rootfs_ofs = 0x140000,
}, {
.id = "16Mltq",
.fw_max_len = 0xf90000,
.kernel_la = 0x80002000,
.kernel_ep = 0x800061b0,
.rootfs_ofs = 0x140000,
}, {
.id = "8Mmtk",
.fw_max_len = 0x7a0000,
.kernel_la = 0x80000000,
.kernel_ep = 0x80000000,
.rootfs_ofs = 0x140000,
}, {
.id = "8MLmtk",
.fw_max_len = 0x7b0000,
.kernel_la = 0x80000000,
.kernel_ep = 0x80000000,
.rootfs_ofs = 0x140000,
}, {
/* terminating entry */
}
};
static struct board_info boards[] = {
{
.id = "TD-W8970v1",
.hw_id = 0x89700001,
.hw_rev = 1,
.layout_id = "8Mltq",
}, {
.id = "TD-W8980v1",
.hw_id = 0x89800001,
.hw_rev = 14,
.layout_id = "8Mltq",
}, {
.id = "ArcherC20i",
.hw_id = 0xc2000001,
.hw_rev = 58,
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
.id = "ArcherVR200V",
.hw_id = 0x73b70801,
.hw_rev = 0x2f,
.layout_id = "16Mltq",
.hdr_ver = 2,
}, {
.id = "ArcherC50",
.hw_id = 0xc7500001,
.hw_rev = 69,
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
.id = "ArcherMR200",
.hw_id = 0xd7500001,
.hw_rev = 0x4a,
.layout_id = "8MLmtk",
.hdr_ver = 3,
.endian_swap = true,
ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 TP-Link TL-WR840N v4 and TL-WR841N v13 are simple N300 routers with 5-port FE switch and non-detachable antennas. Both are very similar and are based on MediaTek MT7628NN (aka MT7628N) WiSoC. The difference between these two models is in number of available LEDs, buttons and power input switch. This work is partially based on GitHub PR#974. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - TL-WR840N v4: 5x LED (GPIO-controlled), 1x button - TL-WR841N v13: 8x LED (GPIO-controlled*), 2x button, power input switch * WAN LED in TL-WR841N v13 is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Factory image notes: These devices use version 3 of TP-Link header, fortunately without RSA signature (at least in case of devices sold in Europe). The difference lays in the requirement for a non-zero value in "Additional Hardware Version" field. Ideally, it should match the value stored in vendor firmware header on device ("0x4"/"0x13" for these devices) but it seems that anything other than "0" is correct. We are able to prepare factory firwmare file which is accepted and (almost) correctly flashed from the vendor GUI. As it turned out, it accepts files without U-Boot image with second header at the beginning but due to some kind of bug in upgrade routine, flashed image gets corrupted before it's written to flash. Tests showed that the GUI upgrade routine copies value of "Additional Hardware Version" from existing firmware into offset "0x2023c" in provided file, _before_ storing it in flash. In case of vendor firmware upgrade files (which all include U-Boot image and two headers), this offset points to the matching field in kernel+rootfs firmware part header. Unfortunately, in case of LEDE factory image file which contains only one header, it points to the offset "0x2023c" in kernel image. This leads to a corrupted kernel and ends up with a "soft-bricked" device. The good news is that U-Boot in these devices contains well known tftp recovery mode, which can be triggered with "reset" button. What's more, in comparison to some of older MediaTek based TP-Link devices, this recovery mode doesn't write whole file at offset "0x0" in flash, without verifying provided file in advance. In case of recovery mode in these devices, first "0x20000" bytes are always skipped and "0x7a0000" bytes from rest of the file are stored in flash at offset "0x20000". Flash instruction: Until (if at all) TP-Link fixes described problem, the only way to flash LEDE image in these devices is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "lede-ramips-mt7628-tl-wr84...-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. To access U-Boot CLI, keep pressed "4" key during boot. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
}, {
.id = "TL-WR840NV4",
.hw_id = 0x08400004,
.hw_rev = 0x1,
.hw_ver_add = 0x4,
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
.id = "TL-WR841NV13",
.hw_id = 0x08410013,
.hw_rev = 0x268,
.hw_ver_add = 0x13,
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
/* terminating entry */
}
};
/*
* Message macros
*/
#define ERR(fmt, ...) do { \
fflush(0); \
fprintf(stderr, "[%s] *** error: " fmt "\n", \
progname, ## __VA_ARGS__ ); \
} while (0)
#define ERRS(fmt, ...) do { \
int save = errno; \
fflush(0); \
fprintf(stderr, "[%s] *** error: " fmt ": %s\n", \
progname, ## __VA_ARGS__, strerror(save)); \
} while (0)
#define DBG(fmt, ...) do { \
fprintf(stderr, "[%s] " fmt "\n", progname, ## __VA_ARGS__ ); \
} while (0)
static struct board_info *find_board(char *id)
{
struct board_info *ret;
struct board_info *board;
ret = NULL;
for (board = boards; board->id != NULL; board++){
if (strcasecmp(id, board->id) == 0) {
ret = board;
break;
}
};
return ret;
}
static struct board_info *find_board_by_hwid(uint32_t hw_id)
{
struct board_info *board;
for (board = boards; board->id != NULL; board++) {
if (hw_id == board->hw_id)
return board;
};
return NULL;
}
static struct flash_layout *find_layout(char *id)
{
struct flash_layout *ret;
struct flash_layout *l;
ret = NULL;
for (l = layouts; l->id != NULL; l++){
if (strcasecmp(id, l->id) == 0) {
ret = l;
break;
}
};
return ret;
}
static void usage(int status)
{
FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
struct board_info *board;
fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
fprintf(stream,
"\n"
"Options:\n"
" -B <board> create image for the board specified with <board>\n"
" -c use combined kernel image\n"
" -e swap endianness in kernel load address and entry point\n"
" -E <ep> overwrite kernel entry point with <ep> (hexval prefixed with 0x)\n"
" -L <la> overwrite kernel load address with <la> (hexval prefixed with 0x)\n"
" -H <hwid> use hardware id specified with <hwid>\n"
" -W <hwrev> use hardware revision specified with <hwrev>\n"
" -w <hwveradd> use additional hardware version specified with <hwveradd>\n"
" -F <id> use flash layout specified with <id>\n"
" -k <file> read kernel image from the file <file>\n"
" -r <file> read rootfs image from the file <file>\n"
" -a <align> align the rootfs start on an <align> bytes boundary\n"
" -R <offset> overwrite rootfs offset with <offset> (hexval prefixed with 0x)\n"
" -o <file> write output to the file <file>\n"
" -s strip padding from the end of the image\n"
" -j add jffs2 end-of-filesystem markers\n"
" -N <vendor> set image vendor to <vendor>\n"
" -T <version> set header version to <version>\n"
" -V <version> set image version to <version>\n"
" -v <version> set firmware version to <version>\n"
" -y <version> set secondary version to <version>\n"
" -i <file> inspect given firmware file <file>\n"
" -x extract kernel and rootfs while inspecting (requires -i)\n"
" -h show this screen\n"
);
exit(status);
}
static int get_md5(char *data, int size, char *md5)
{
MD5_CTX ctx;
MD5_Init(&ctx);
MD5_Update(&ctx, data, size);
MD5_Final(md5, &ctx);
}
static int get_file_stat(struct file_info *fdata)
{
struct stat st;
int res;
if (fdata->file_name == NULL)
return 0;
res = stat(fdata->file_name, &st);
if (res){
ERRS("stat failed on %s", fdata->file_name);
return res;
}
fdata->file_size = st.st_size;
return 0;
}
static int read_to_buf(struct file_info *fdata, char *buf)
{
FILE *f;
int ret = EXIT_FAILURE;
f = fopen(fdata->file_name, "r");
if (f == NULL) {
ERRS("could not open \"%s\" for reading", fdata->file_name);
goto out;
}
errno = 0;
fread(buf, fdata->file_size, 1, f);
if (errno != 0) {
ERRS("unable to read from file \"%s\"", fdata->file_name);
goto out_close;
}
ret = EXIT_SUCCESS;
out_close:
fclose(f);
out:
return ret;
}
static int check_options(void)
{
int ret;
if (inspect_info.file_name) {
ret = get_file_stat(&inspect_info);
if (ret)
return ret;
return 0;
} else if (extract) {
ERR("no firmware for inspection specified");
return -1;
}
if (board_id == NULL && opt_hw_id == NULL) {
ERR("either board or hardware id must be specified");
return -1;
}
if (board_id) {
board = find_board(board_id);
if (board == NULL) {
ERR("unknown/unsupported board id \"%s\"", board_id);
return -1;
}
if (layout_id == NULL)
layout_id = board->layout_id;
if (board->hdr_ver)
hdr_ver = board->hdr_ver;
} else {
board = &custom_board;
if (layout_id == NULL) {
ERR("flash layout is not specified");
return -1;
}
board->hw_id = strtoul(opt_hw_id, NULL, 0);
if (opt_hw_rev)
board->hw_rev = strtoul(opt_hw_rev, NULL, 0);
else
board->hw_rev = 1;
if (opt_hw_ver_add)
board->hw_ver_add = strtoul(opt_hw_ver_add, NULL, 0);
else
board->hw_ver_add = 0;
}
layout = find_layout(layout_id);
if (layout == NULL) {
ERR("unknown flash layout \"%s\"", layout_id);
return -1;
}
if (!kernel_la)
kernel_la = layout->kernel_la;
if (!kernel_ep)
kernel_ep = layout->kernel_ep;
if (!rootfs_ofs)
rootfs_ofs = layout->rootfs_ofs;
if (kernel_info.file_name == NULL) {
ERR("no kernel image specified");
return -1;
}
ret = get_file_stat(&kernel_info);
if (ret)
return ret;
kernel_len = kernel_info.file_size;
if (combined) {
if (kernel_info.file_size >
layout->fw_max_len - sizeof(struct fw_header)) {
ERR("kernel image is too big");
return -1;
}
} else {
if (rootfs_info.file_name == NULL) {
ERR("no rootfs image specified");
return -1;
}
ret = get_file_stat(&rootfs_info);
if (ret)
return ret;
if (rootfs_align) {
kernel_len += sizeof(struct fw_header);
kernel_len = ALIGN(kernel_len, rootfs_align);
kernel_len -= sizeof(struct fw_header);
DBG("kernel length aligned to %u", kernel_len);
if (kernel_len + rootfs_info.file_size >
layout->fw_max_len - sizeof(struct fw_header)) {
ERR("images are too big");
return -1;
}
} else {
if (kernel_info.file_size >
rootfs_ofs - sizeof(struct fw_header)) {
ERR("kernel image is too big");
return -1;
}
if (rootfs_info.file_size >
(layout->fw_max_len - rootfs_ofs)) {
ERR("rootfs image is too big");
return -1;
}
}
}
if (ofname == NULL) {
ERR("no output file specified");
return -1;
}
ret = sscanf(fw_ver, "%d.%d.%d", &fw_ver_hi, &fw_ver_mid, &fw_ver_lo);
if (ret != 3) {
ERR("invalid firmware version '%s'", fw_ver);
return -1;
}
ret = sscanf(sver, "%d.%d", &sver_hi, &sver_lo);
if (ret != 2) {
ERR("invalid secondary version '%s'", sver);
return -1;
}
return 0;
}
static void fill_header(char *buf, int len)
{
struct fw_header *hdr = (struct fw_header *)buf;
unsigned ver_len;
memset(hdr, '\xff', sizeof(struct fw_header));
hdr->version = htonl(bswap_32(hdr_ver));
ver_len = strlen(version);
if (ver_len > (sizeof(hdr->fw_version) - 1))
ver_len = sizeof(hdr->fw_version) - 1;
memcpy(hdr->fw_version, version, ver_len);
hdr->fw_version[ver_len] = 0;
hdr->hw_id = htonl(board->hw_id);
hdr->hw_rev = htonl(board->hw_rev);
hdr->hw_ver_add = htonl(board->hw_ver_add);
if (boot_info.file_size == 0) {
memcpy(hdr->md5sum1, md5salt_normal, sizeof(hdr->md5sum1));
hdr->boot_ofs = htonl(0);
hdr->boot_len = htonl(0);
} else {
memcpy(hdr->md5sum1, md5salt_boot, sizeof(hdr->md5sum1));
hdr->boot_ofs = htonl(rootfs_ofs + rootfs_info.file_size);
hdr->boot_len = htonl(rootfs_info.file_size);
}
hdr->kernel_la = htonl(kernel_la);
hdr->kernel_ep = htonl(kernel_ep);
hdr->fw_length = htonl(layout->fw_max_len);
hdr->kernel_ofs = htonl(sizeof(struct fw_header));
hdr->kernel_len = htonl(kernel_len);
if (!combined) {
hdr->rootfs_ofs = htonl(rootfs_ofs);
hdr->rootfs_len = htonl(rootfs_info.file_size);
}
hdr->boot_ofs = htonl(0);
hdr->boot_len = htonl(boot_info.file_size);
hdr->unk2 = htonl(0);
hdr->unk3 = htonl(0xffffffff);
hdr->unk4 = htons(0x55aa);
hdr->unk5 = 0xa5;
hdr->sver_hi = sver_hi;
hdr->sver_lo = sver_lo;
hdr->ver_hi = fw_ver_hi;
hdr->ver_mid = fw_ver_mid;
hdr->ver_lo = fw_ver_lo;
if (board->endian_swap) {
hdr->kernel_la = bswap_32(hdr->kernel_la);
hdr->kernel_ep = bswap_32(hdr->kernel_ep);
}
get_md5(buf, len, hdr->md5sum1);
}
static int pad_jffs2(char *buf, int currlen)
{
int len;
uint32_t pad_mask;
len = currlen;
pad_mask = (64 * 1024);
while ((len < layout->fw_max_len) && (pad_mask != 0)) {
uint32_t mask;
int i;
for (i = 10; i < 32; i++) {
mask = 1 << i;
if (pad_mask & mask)
break;
}
len = ALIGN(len, mask);
for (i = 10; i < 32; i++) {
mask = 1 << i;
if ((len & (mask - 1)) == 0)
pad_mask &= ~mask;
}
for (i = 0; i < sizeof(jffs2_eof_mark); i++)
buf[len + i] = jffs2_eof_mark[i];
len += sizeof(jffs2_eof_mark);
}
return len;
}
static int write_fw(char *data, int len)
{
FILE *f;
int ret = EXIT_FAILURE;
f = fopen(ofname, "w");
if (f == NULL) {
ERRS("could not open \"%s\" for writing", ofname);
goto out;
}
errno = 0;
fwrite(data, len, 1, f);
if (errno) {
ERRS("unable to write output file");
goto out_flush;
}
DBG("firmware file \"%s\" completed", ofname);
ret = EXIT_SUCCESS;
out_flush:
fflush(f);
fclose(f);
if (ret != EXIT_SUCCESS) {
unlink(ofname);
}
out:
return ret;
}
static int build_fw(void)
{
int buflen;
char *buf;
char *p;
int ret = EXIT_FAILURE;
int writelen = 0;
buflen = layout->fw_max_len;
buf = malloc(buflen);
if (!buf) {
ERR("no memory for buffer\n");
goto out;
}
memset(buf, 0xff, buflen);
p = buf + sizeof(struct fw_header);
ret = read_to_buf(&kernel_info, p);
if (ret)
goto out_free_buf;
writelen = sizeof(struct fw_header) + kernel_len;
if (!combined) {
if (rootfs_align)
p = buf + writelen;
else
p = buf + rootfs_ofs;
ret = read_to_buf(&rootfs_info, p);
if (ret)
goto out_free_buf;
if (rootfs_align)
writelen += rootfs_info.file_size;
else
writelen = rootfs_ofs + rootfs_info.file_size;
if (add_jffs2_eof)
writelen = pad_jffs2(buf, writelen);
}
if (!strip_padding)
writelen = buflen;
fill_header(buf, writelen);
ret = write_fw(buf, writelen);
if (ret)
goto out_free_buf;
ret = EXIT_SUCCESS;
out_free_buf:
free(buf);
out:
return ret;
}
/* Helper functions to inspect_fw() representing different output formats */
static inline void inspect_fw_pstr(char *label, char *str)
{
printf("%-23s: %s\n", label, str);
}
static inline void inspect_fw_phex(char *label, uint32_t val)
{
printf("%-23s: 0x%08x\n", label, val);
}
static inline void inspect_fw_phexpost(char *label,
uint32_t val, char *post)
{
printf("%-23s: 0x%08x (%s)\n", label, val, post);
}
static inline void inspect_fw_phexdef(char *label,
uint32_t val, uint32_t defval)
{
printf("%-23s: 0x%08x ", label, val);
if (val == defval)
printf("(== OpenWrt default)\n");
else
printf("(OpenWrt default: 0x%08x)\n", defval);
}
static inline void inspect_fw_phexexp(char *label,
uint32_t val, uint32_t expval)
{
printf("%-23s: 0x%08x ", label, val);
if (val == expval)
printf("(ok)\n");
else
printf("(expected: 0x%08x)\n", expval);
}
static inline void inspect_fw_phexdec(char *label, uint32_t val)
{
printf("%-23s: 0x%08x / %8u bytes\n", label, val, val);
}
static inline void inspect_fw_phexdecdef(char *label,
uint32_t val, uint32_t defval)
{
printf("%-23s: 0x%08x / %8u bytes ", label, val, val);
if (val == defval)
printf("(== OpenWrt default)\n");
else
printf("(OpenWrt default: 0x%08x)\n", defval);
}
static inline void inspect_fw_pmd5sum(char *label, uint8_t *val, char *text)
{
int i;
printf("%-23s:", label);
for (i=0; i<MD5SUM_LEN; i++)
printf(" %02x", val[i]);
printf(" %s\n", text);
}
static int inspect_fw(void)
{
char *buf;
struct fw_header *hdr;
uint8_t md5sum[MD5SUM_LEN];
struct board_info *board;
int ret = EXIT_FAILURE;
buf = malloc(inspect_info.file_size);
if (!buf) {
ERR("no memory for buffer!\n");
goto out;
}
ret = read_to_buf(&inspect_info, buf);
if (ret)
goto out_free_buf;
hdr = (struct fw_header *)buf;
inspect_fw_pstr("File name", inspect_info.file_name);
inspect_fw_phexdec("File size", inspect_info.file_size);
switch(bswap_32(ntohl(hdr->version))) {
case 2:
case 3:
break;
default:
ERR("file does not seem to have V2/V3 header!\n");
goto out_free_buf;
}
inspect_fw_phexdec("Version 2 Header size", sizeof(struct fw_header));
memcpy(md5sum, hdr->md5sum1, sizeof(md5sum));
if (ntohl(hdr->boot_len) == 0)
memcpy(hdr->md5sum1, md5salt_normal, sizeof(md5sum));
else
memcpy(hdr->md5sum1, md5salt_boot, sizeof(md5sum));
get_md5(buf, inspect_info.file_size, hdr->md5sum1);
if (memcmp(md5sum, hdr->md5sum1, sizeof(md5sum))) {
inspect_fw_pmd5sum("Header MD5Sum1", md5sum, "(*ERROR*)");
inspect_fw_pmd5sum(" --> expected", hdr->md5sum1, "");
} else {
inspect_fw_pmd5sum("Header MD5Sum1", md5sum, "(ok)");
}
if (ntohl(hdr->unk2) != 0)
inspect_fw_phexdec("Unknown value 2", hdr->unk2);
inspect_fw_pmd5sum("Header MD5Sum2", hdr->md5sum2,
"(purpose yet unknown, unchecked here)");
if (ntohl(hdr->unk3) != 0xffffffff)
inspect_fw_phexdec("Unknown value 3", hdr->unk3);
if (ntohs(hdr->unk4) != 0x55aa)
inspect_fw_phexdec("Unknown value 4", hdr->unk4);
if (hdr->unk5 != 0xa5)
inspect_fw_phexdec("Unknown value 5", hdr->unk5);
printf("\n");
inspect_fw_pstr("Firmware version", hdr->fw_version);
board = find_board_by_hwid(ntohl(hdr->hw_id));
if (board) {
layout = find_layout(board->layout_id);
inspect_fw_phexpost("Hardware ID",
ntohl(hdr->hw_id), board->id);
inspect_fw_phexexp("Hardware Revision",
ntohl(hdr->hw_rev), board->hw_rev);
inspect_fw_phexexp("Additional HW Version",
ntohl(hdr->hw_ver_add), board->hw_ver_add);
} else {
inspect_fw_phexpost("Hardware ID",
ntohl(hdr->hw_id), "unknown");
inspect_fw_phex("Hardware Revision",
ntohl(hdr->hw_rev));
inspect_fw_phex("Additional HW Version",
ntohl(hdr->hw_ver_add));
}
printf("%-23s: %d.%d.%d-%d.%d\n", "Software version",
hdr->ver_hi, hdr->ver_mid, hdr->ver_lo,
hdr->sver_hi, hdr->sver_lo);
printf("\n");
inspect_fw_phexdec("Kernel data offset",
ntohl(hdr->kernel_ofs));
inspect_fw_phexdec("Kernel data length",
ntohl(hdr->kernel_len));
if (board) {
inspect_fw_phexdef("Kernel load address",
ntohl(hdr->kernel_la),
layout ? layout->kernel_la : 0xffffffff);
inspect_fw_phexdef("Kernel entry point",
ntohl(hdr->kernel_ep),
layout ? layout->kernel_ep : 0xffffffff);
inspect_fw_phexdecdef("Rootfs data offset",
ntohl(hdr->rootfs_ofs),
layout ? layout->rootfs_ofs : 0xffffffff);
} else {
inspect_fw_phex("Kernel load address",
ntohl(hdr->kernel_la));
inspect_fw_phex("Kernel entry point",
ntohl(hdr->kernel_ep));
inspect_fw_phexdec("Rootfs data offset",
ntohl(hdr->rootfs_ofs));
}
inspect_fw_phexdec("Rootfs data length",
ntohl(hdr->rootfs_len));
inspect_fw_phexdec("Boot loader data offset",
ntohl(hdr->boot_ofs));
inspect_fw_phexdec("Boot loader data length",
ntohl(hdr->boot_len));
inspect_fw_phexdec("Total firmware length",
ntohl(hdr->fw_length));
if (extract) {
FILE *fp;
char *filename;
printf("\n");
filename = malloc(strlen(inspect_info.file_name) + 8);
sprintf(filename, "%s-kernel", inspect_info.file_name);
printf("Extracting kernel to \"%s\"...\n", filename);
fp = fopen(filename, "w");
if (fp) {
if (!fwrite(buf + ntohl(hdr->kernel_ofs),
ntohl(hdr->kernel_len), 1, fp)) {
ERR("error in fwrite(): %s", strerror(errno));
}
fclose(fp);
} else {
ERR("error in fopen(): %s", strerror(errno));
}
free(filename);
filename = malloc(strlen(inspect_info.file_name) + 8);
sprintf(filename, "%s-rootfs", inspect_info.file_name);
printf("Extracting rootfs to \"%s\"...\n", filename);
fp = fopen(filename, "w");
if (fp) {
if (!fwrite(buf + ntohl(hdr->rootfs_ofs),
ntohl(hdr->rootfs_len), 1, fp)) {
ERR("error in fwrite(): %s", strerror(errno));
}
fclose(fp);
} else {
ERR("error in fopen(): %s", strerror(errno));
}
free(filename);
}
out_free_buf:
free(buf);
out:
return ret;
}
int main(int argc, char *argv[])
{
int ret = EXIT_FAILURE;
int err;
FILE *outfile;
progname = basename(argv[0]);
while ( 1 ) {
int c;
c = getopt(argc, argv, "a:B:H:E:F:L:V:N:W:w:ci:k:r:R:o:xhsjv:y:T:e");
if (c == -1)
break;
switch (c) {
case 'a':
sscanf(optarg, "0x%x", &rootfs_align);
break;
case 'B':
board_id = optarg;
break;
case 'H':
opt_hw_id = optarg;
break;
case 'E':
sscanf(optarg, "0x%x", &kernel_ep);
break;
case 'F':
layout_id = optarg;
break;
case 'W':
opt_hw_rev = optarg;
break;
case 'w':
opt_hw_ver_add = optarg;
break;
case 'L':
sscanf(optarg, "0x%x", &kernel_la);
break;
case 'V':
version = optarg;
break;
case 'v':
fw_ver = optarg;
break;
case 'y':
sver = optarg;
break;
case 'N':
vendor = optarg;
break;
case 'c':
combined++;
break;
case 'k':
kernel_info.file_name = optarg;
break;
case 'r':
rootfs_info.file_name = optarg;
break;
case 'R':
sscanf(optarg, "0x%x", &rootfs_ofs);
break;
case 'o':
ofname = optarg;
break;
case 's':
strip_padding = 1;
break;
case 'i':
inspect_info.file_name = optarg;
break;
case 'j':
add_jffs2_eof = 1;
break;
case 'x':
extract = 1;
break;
case 'T':
hdr_ver = atoi(optarg);
break;
case 'e':
custom_board.endian_swap = true;
break;
case 'h':
usage(EXIT_SUCCESS);
break;
default:
usage(EXIT_FAILURE);
break;
}
}
ret = check_options();
if (ret)
goto out;
if (!inspect_info.file_name)
ret = build_fw();
else
ret = inspect_fw();
out:
return ret;
}