You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0240-audioinjector-octo...

105 lines
3.3 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From f7045758fffa176ea68730ea855415e619bf516d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Sat, 3 Mar 2018 16:25:19 +0000
Subject: [PATCH 240/454] audioinjector-octo: Add continuous clock feature
By user request, add a switch to prevent the clocks being stopped when
the stream is paused, stopped or shutdown. Provide access to the switch
by adding a 'non-stop-clocks' parameter to the audioinjector-addons
overlay.
See: https://github.com/raspberrypi/linux/issues/2409
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/overlays/README | 5 +++--
.../overlays/audioinjector-addons-overlay.dts | 6 +++++-
sound/soc/bcm/audioinjector-octo-soundcard.c | 19 +++++++++++--------
3 files changed, 19 insertions(+), 11 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -357,8 +357,9 @@ Params: interrupt GPIO use
Name: audioinjector-addons
Info: Configures the audioinjector.net audio add on soundcards
-Load: dtoverlay=audioinjector-addons
-Params: <None>
+Load: dtoverlay=audioinjector-addons,<param>=<val>
+Params: non-stop-clocks Keeps the clocks running even when the stream
+ is paused or stopped (default off)
Name: audioinjector-wm8731-audio
--- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts
@@ -42,7 +42,7 @@
fragment@2 {
target = <&sound>;
- __overlay__ {
+ snd: __overlay__ {
compatible = "ai,audioinjector-octo-soundcard";
mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>,
<&gpio 24 0>;
@@ -52,4 +52,8 @@
status = "okay";
};
};
+
+ __overrides__ {
+ non-stop-clocks = <&snd>, "non-stop-clocks?";
+ };
};
--- a/sound/soc/bcm/audioinjector-octo-soundcard.c
+++ b/sound/soc/bcm/audioinjector-octo-soundcard.c
@@ -29,6 +29,7 @@
static struct gpio_descs *mult_gpios;
static struct gpio_desc *codec_rst_gpio;
static unsigned int audioinjector_octo_rate;
+static bool non_stop_clocks;
static const unsigned int audioinjector_octo_rates[] = {
96000, 48000, 32000, 24000, 16000, 8000, 88200, 44100, 29400, 22050, 14700,
@@ -133,12 +134,16 @@ static int audioinjector_octo_hw_params(
static int audioinjector_octo_trigger(struct snd_pcm_substream *substream,
int cmd){
int mult[4];
- mult[0] = 0;
- mult[1] = 0;
- mult[2] = 0;
- mult[3] = 0;
+
+ memset(mult, 0, sizeof(mult));
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (!non_stop_clocks)
+ break;
+ /* Drop through... */
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
@@ -177,10 +182,6 @@ static int audioinjector_octo_trigger(st
return -EINVAL;
}
break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- break;
default:
return -EINVAL;
}
@@ -276,6 +277,8 @@ static int audioinjector_octo_probe(stru
if (IS_ERR(codec_rst_gpio))
return PTR_ERR(codec_rst_gpio);
+ non_stop_clocks = of_property_read_bool(pdev->dev.of_node, "non-stop-clocks");
+
if (codec_rst_gpio)
gpiod_set_value(codec_rst_gpio, 1);
msleep(500);