You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0419-media-ov5647-Use-g...

55 lines
1.6 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 185076ab6bc5dd83f2da62552fbb79a53d36314d Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Tue, 18 Sep 2018 11:08:51 +0100
Subject: [PATCH 419/454] media: ov5647: Use gpiod_set_value_cansleep
All calls to the gpio library are in contexts that can sleep,
therefore there is no issue with having those GPIOs controlled
by controllers which require sleeping (eg I2C GPIO expanders).
Switch to using gpiod_set_value_cansleep instead of gpiod_set_value
to avoid triggering the warning in gpiolib should the GPIO
controller need to sleep.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/media/i2c/ov5647.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -348,7 +348,7 @@ static int ov5647_sensor_power(struct v4
dev_dbg(&client->dev, "OV5647 power on\n");
if (ov5647->pwdn) {
- gpiod_set_value(ov5647->pwdn, 0);
+ gpiod_set_value_cansleep(ov5647->pwdn, 0);
msleep(PWDN_ACTIVE_DELAY_MS);
}
@@ -390,7 +390,7 @@ static int ov5647_sensor_power(struct v4
clk_disable_unprepare(ov5647->xclk);
- gpiod_set_value(ov5647->pwdn, 1);
+ gpiod_set_value_cansleep(ov5647->pwdn, 1);
}
/* Update the power count. */
@@ -624,13 +624,13 @@ static int ov5647_probe(struct i2c_clien
goto mutex_remove;
if (sensor->pwdn) {
- gpiod_set_value(sensor->pwdn, 0);
+ gpiod_set_value_cansleep(sensor->pwdn, 0);
msleep(PWDN_ACTIVE_DELAY_MS);
}
ret = ov5647_detect(sd);
- gpiod_set_value(sensor->pwdn, 1);
+ gpiod_set_value_cansleep(sensor->pwdn, 1);
if (ret < 0)
goto error;