You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0210-ASoC-allo-boss-dac...

57 lines
1.7 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From ae1a548ef0cb1a25242201bca5fefa5090728ea8 Mon Sep 17 00:00:00 2001
From: Matthias Reichl <hias@horus.com>
Date: Fri, 2 Feb 2018 20:30:42 +0100
Subject: [PATCH 210/454] ASoC: allo-boss-dac: fix S24_LE format
Remove set_bclk_ratio call so 24-bit data is transmitted in
24 bclk cycles.
Signed-off-by: Matthias Reichl <hias@horus.com>
---
sound/soc/bcm/allo-boss-dac.c | 20 ++------------------
1 file changed, 2 insertions(+), 18 deletions(-)
--- a/sound/soc/bcm/allo-boss-dac.c
+++ b/sound/soc/bcm/allo-boss-dac.c
@@ -222,14 +222,6 @@ static int snd_allo_boss_update_rate_den
return 0;
}
-static int snd_allo_boss_set_bclk_ratio_pro(
- struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params)
-{
- int bratio = snd_pcm_format_physical_width(params_format(params))
- * params_channels(params);
- return snd_soc_dai_set_bclk_ratio(cpu_dai, bratio);
-}
-
static void snd_allo_boss_gpio_mute(struct snd_soc_card *card)
{
if (mute_gpio)
@@ -281,9 +273,6 @@ static int snd_allo_boss_hw_params(
{
int ret = 0;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- unsigned int sample_bits =
- snd_pcm_format_physical_width(params_format(params));
if (snd_soc_allo_boss_master) {
struct snd_soc_codec *codec = rtd->codec;
@@ -291,13 +280,8 @@ static int snd_allo_boss_hw_params(
snd_allo_boss_set_sclk(codec,
params_rate(params));
- ret = snd_allo_boss_set_bclk_ratio_pro(cpu_dai,
- params);
- if (!ret)
- ret = snd_allo_boss_update_rate_den(
- substream, params);
- } else {
- ret = snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+ ret = snd_allo_boss_update_rate_den(
+ substream, params);
}
return ret;
}