openwrt/target/linux/imx6/base-files/etc/board.d/02_network

#!/bin/sh
#
# Copyright (C) 2013-2015 OpenWrt.org
#

. /lib/functions/uci-defaults.sh

board=$(board_name)

board_config_update

case "$board" in
cubox-i |\
*gw51xx |\
*gw52xx |\
*gw5904)
	ucidef_set_interface_lan 'eth0'
	;;
*gw53xx |\
*gw54xx |\
*gw552x)
	ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
	;;
*wandboard)
	ucidef_set_interface_wan 'eth0'
	;;
esac

board_config_flush

exit 0
imx6: add new target SVN-Revision: 36753 11 years ago			`#!/bin/sh`
			`#`
imx6: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47738 9 years ago			`# Copyright (C) 2013-2015 OpenWrt.org`
imx6: add new target SVN-Revision: 36753 11 years ago			`#`

all: drop old uci-defaults.sh Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867 9 years ago			`. /lib/functions/uci-defaults.sh`
imx6: use /lib/imx6.sh inside the uci-defaults script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41257 10 years ago
treewide: use the generic board_name function Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 7 years ago			`board=$(board_name)`
imx6: add new target SVN-Revision: 36753 11 years ago
imx6: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47738 9 years ago			`board_config_update`
imx6: add new target SVN-Revision: 36753 11 years ago
imx6: use /lib/imx6.sh inside the uci-defaults script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41257 10 years ago			`case "$board" in`
imx6: Initial support for SolidRun CuBox-i devices based on i.MX6 processors (i1, i2, i2eX, and i4Pro). - Specifications - CuBox i1: - SoC: i.MX6 Solo - Cores: 1 - Memory Size: 512MB - GPU: GC880 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i2 \| i2eX: - SoC: i.MX6 Dual Lite - Cores: 2 - Memory Size: 1GB - GPU: GC2000 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i4Pro \| i4x4: - SoC: i.MX6 Quad - Cores: 4 - Memory Size: 2/4 GB - GPU: GC2000 - Wifi/Bluetooth: Build In - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps Built-in u-boot requires SPL (secondary program loader) to be present on the SD-card regardless of the image type which will be loaded. SPL is generated by the u-boot-mx6cuboxi package which is preselected by the target device and can be found in bin/u-boot-mx6cuboxi directory. Flashing the SPL: dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=4 dd if=bin/targets/imx6/generic/u-boot-mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1 Preparing the firmware on the SD-card: (echo o; echo n; echo p; echo 1; echo ''; echo ''; echo w) \| fdisk /dev/mmcblk0 mkfs.ext4 /dev/mmcblk0p1 mount /dev/mmcblk0p1 /mnt tar -xzf bin/targets/imx6/generic/openwrt-imx6-device-cubox-i-rootfs.tar.gz -C /mnt/ mkdir -p /mnt/boot cp bin/targets/imx6/generic/{-uImage,.dtb,*.scr} /mnt/boot/ Generated u-boot.img needs to be placed on the first partition: cp bin/targets/imx6/generic/u-boot-mx6cuboxi/u-boot.img /mnt/ To boot from the SD card: Boot script which sets mmc/dtb parameters and boots the board is automatically sourced. If this does not work for any reason: mmc dev 0; load mmc 0:1 $scriptaddr boot/boot.scr; source $scriptaddr Currently imx6dl-cubox-i.dtb (Dual Lite) and imx6q-cubox-i.dtb (Quad) device trees are available. Tested on i4Pro, MMC, USB (+ HiD), HDMI and ethernet ports are working. Wireless and bluetooth are broken ATM. According to SolidRun forums, BCM4329/BCM4330 firmware is used which works fine on older kernels. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> 6 years ago			`cubox-i \|\`
imx6: fix platform checking Fix platform checking when configuring networks and when doing sysupgrade. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47168 9 years ago			`*gw51xx \|\`
imx6: add support for GW5904 Signed-off-by: Tim Harvey <tharvey@gateworks.com> 7 years ago			`*gw52xx \|\`
			`*gw5904)`
imx6: add network defaults for GW5400-A Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37979 11 years ago			`ucidef_set_interface_lan 'eth0'`
			`;;`
imx6: fix platform checking Fix platform checking when configuring networks and when doing sysupgrade. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47168 9 years ago			`*gw53xx \|\`
			`*gw54xx \|\`
			`*gw552x)`
imx6: update network defaults for Gateworks Ventana Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38079 11 years ago			`ucidef_set_interfaces_lan_wan 'eth0' 'eth1'`
			`;;`
imx6: fix platform checking Fix platform checking when configuring networks and when doing sysupgrade. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47168 9 years ago			`*wandboard)`
imx6: add new target SVN-Revision: 36753 11 years ago			`ucidef_set_interface_wan 'eth0'`
			`;;`
			`esac`

imx6: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47738 9 years ago			`board_config_flush`
imx6: add new target SVN-Revision: 36753 11 years ago
			`exit 0`