openwrt/package/boot/uboot-envtools/files/kirkwood

#!/bin/sh
#
# Copyright (C) 2012-2014 OpenWrt.org
#

[ -e /etc/config/ubootenv ] && exit 0

touch /etc/config/ubootenv

. /lib/uboot-envtools.sh
. /lib/functions.sh

board=$(board_name)

case "$board" in
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
iom,ix2-200|\
linksys,viper|\
raidsonic,ib-nas62x0|\
seagate,dockstar|\
zyxel,nsa310b|\
zyxel,nsa325)
	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
	;;
linksys,audi)
	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000"
	;;
esac

config_load ubootenv
config_foreach ubootenv_add_app_config ubootenv

exit 0
uboot-envtools: add kirkwood board support SVN-Revision: 32756 12 years ago			`#!/bin/sh`
			`#`
uboot-envtools: add support for kirkwood ea4500 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40872 10 years ago			`# Copyright (C) 2012-2014 OpenWrt.org`
uboot-envtools: add kirkwood board support SVN-Revision: 32756 12 years ago			`#`

			`[ -e /etc/config/ubootenv ] && exit 0`

			`touch /etc/config/ubootenv`

			`. /lib/uboot-envtools.sh`
			`. /lib/functions.sh`

treewide: use the generic board_name function Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 7 years ago			`board=$(board_name)`
uboot-envtools: use new scripts from /lib/ to match boards Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41340 10 years ago
			`case "$board" in`
kirkwood: sort occurrences of boardame alphabetically This restores the alphabetical sort that was present before the renaming of boardname. Signed-off-by: Mathias Kresin <dev@kresin.me> 6 years ago			`cloudengines,pogoe02\|\`
			`cloudengines,pogoplugv4\|\`
kirkwood: add support for Iomega Storcenter ix2-200 Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1000Mhz - Flash-Chip: Hynix NAND - Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16 - RAM: 256MB - LAN: 1x 1000 Mbps Ethernet - WiFi: none - 3x USB 2.0 - UART: for serial console Installation instructions - easy steps: 1. download factory.bin and copy into tftp server 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.13 tftpboot 0x00800000 factory.bin nand erase 0x100000 $(filesize) nand write 0x00800000 0x100000 $(filesize) run bootcmd ``` 3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Installation steps nand bad blocks proof: 1. download initramfs-uImage and copy into usb ext2 partition ``` mkfs.ext2 -L ext2 /dev/sdh1 mount -t ext2 /dev/sdh1 /mnt cp initramfs-uImage /mnt/initramfs.bin umount /mnt ``` 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000 ``` 3. log into openwrt and sysupgrade to install into flash ``` sysupgrade -n /tmp/sysupgrade.bin ``` 4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com> 6 years ago			`iom,ix2-200\|\`
kirkwood: use the generic board detect Drop the target specific detection function in favour of the generic one provided by base-files. Signed-off-by: Mathias Kresin <dev@kresin.me> 7 years ago			`linksys,viper\|\`
kirkwood: sort occurrences of boardame alphabetically This restores the alphabetical sort that was present before the renaming of boardname. Signed-off-by: Mathias Kresin <dev@kresin.me> 6 years ago			`raidsonic,ib-nas62x0\|\`
			`seagate,dockstar\|\`
kirkwood: use the generic board detect Drop the target specific detection function in favour of the generic one provided by base-files. Signed-off-by: Mathias Kresin <dev@kresin.me> 7 years ago			`zyxel,nsa310b\|\`
kirkwood: sort occurrences of boardame alphabetically This restores the alphabetical sort that was present before the renaming of boardname. Signed-off-by: Mathias Kresin <dev@kresin.me> 6 years ago			`zyxel,nsa325)`
uboot-envtools: add kirkwood board support SVN-Revision: 32756 12 years ago			`ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"`
			`;;`
kirkwood: use the generic board detect Drop the target specific detection function in favour of the generic one provided by base-files. Signed-off-by: Mathias Kresin <dev@kresin.me> 7 years ago			`linksys,audi)`
uboot-envtools: kirkwood: fix EA35/4500 board names Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47457 9 years ago			`ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000"`
			`;;`
uboot-envtools: add kirkwood board support SVN-Revision: 32756 12 years ago			`esac`

			`config_load ubootenv`
			`config_foreach ubootenv_add_app_config ubootenv`

			`exit 0`