You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0293-net-phy-use-unlock...

57 lines
1.9 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 2d490ea00f141384d57c7e18e44b34e94e572b26 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 2 Jan 2018 10:58:32 +0000
Subject: [PATCH 293/454] net: phy: use unlocked accessors for indirect MMD
accesses
commit 1b2dea2e6a6e3399e88784d57aea80f4fd5e8956 upstream.
Use unlocked accessors for indirect MMD accesses to clause 22 PHYs.
This permits tracing of these accesses.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/phy-core.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -193,13 +193,14 @@ static void mmd_phy_indirect(struct mii_
u16 regnum)
{
/* Write the desired MMD Devad */
- bus->write(bus, phy_addr, MII_MMD_CTRL, devad);
+ __mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
/* Write the desired MMD register address */
- bus->write(bus, phy_addr, MII_MMD_DATA, regnum);
+ __mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
/* Select the Function : DATA with no post increment */
- bus->write(bus, phy_addr, MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ __mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
+ devad | MII_MMD_CTRL_NOINCR);
}
/**
@@ -232,7 +233,7 @@ int phy_read_mmd(struct phy_device *phyd
mmd_phy_indirect(bus, phy_addr, devad, regnum);
/* Read the content of the MMD's selected register */
- val = bus->read(bus, phy_addr, MII_MMD_DATA);
+ val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
mutex_unlock(&bus->mdio_lock);
}
return val;
@@ -271,7 +272,7 @@ int phy_write_mmd(struct phy_device *phy
mmd_phy_indirect(bus, phy_addr, devad, regnum);
/* Write the data into MMD's selected register */
- bus->write(bus, phy_addr, MII_MMD_DATA, val);
+ __mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
mutex_unlock(&bus->mdio_lock);
ret = 0;