You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0294-net-phy-add-unlock...

98 lines
3.0 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 6709752e7233afd929a130ac4f3645348be94c1f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 2 Jan 2018 10:58:37 +0000
Subject: [PATCH 294/454] net: phy: add unlocked accessors
commit 788f9933db6172801336d0ae2dec5bdc7525389f upstream.
Add unlocked versions of the bus accessors, which allows access to the
bus with all the tracing. These accessors validate that the bus mutex
is held, which is a basic requirement for all mii bus accesses.
Also added is a read-modify-write unlocked accessor with the same
locking requirements.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/phy-core.c | 25 +++++++++++++++++++++++++
include/linux/phy.h | 28 ++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -280,3 +280,28 @@ int phy_write_mmd(struct phy_device *phy
return ret;
}
EXPORT_SYMBOL(phy_write_mmd);
+
+/**
+ * __phy_modify() - Convenience function for modifying a PHY register
+ * @phydev: a pointer to a &struct phy_device
+ * @regnum: register number
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * Unlocked helper function which allows a PHY register to be modified as
+ * new register value = (old register value & mask) | set
+ */
+int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+ int ret, res;
+
+ ret = __phy_read(phydev, regnum);
+ if (ret >= 0) {
+ res = __phy_write(phydev, regnum, (ret & ~mask) | set);
+ if (res < 0)
+ ret = res;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(__phy_modify);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -726,6 +726,18 @@ static inline int phy_read(struct phy_de
}
/**
+ * __phy_read - convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to read
+ *
+ * The caller must have taken the MDIO bus lock.
+ */
+static inline int __phy_read(struct phy_device *phydev, u32 regnum)
+{
+ return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);
+}
+
+/**
* phy_write - Convenience function for writing a given PHY register
* @phydev: the phy_device struct
* @regnum: register number to write
@@ -741,6 +753,22 @@ static inline int phy_write(struct phy_d
}
/**
+ * __phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * The caller must have taken the MDIO bus lock.
+ */
+static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val)
+{
+ return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum,
+ val);
+}
+
+int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
+
+/**
* phy_interrupt_is_valid - Convenience function for testing a given PHY irq
* @phydev: the phy_device struct
*