You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0369-staging-bcm2835-ca...

155 lines
4.3 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 5d8eefe0b0b10b346c76cda1c99bceca33d66aac Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Thu, 10 May 2018 12:42:09 -0700
Subject: [PATCH 369/454] staging: bcm2835-camera: Remove bulk_mutex as it is
not required
commit 71fcbc4740ab24c5208a24cf48a8190dc8f5d9ae upstream.
There is no requirement to serialise bulk transfers as that is all
done in VCHI, and if a second MMAL_MSG_TYPE_BUFFER_TO_HOST happened
before the VCHI_CALLBACK_BULK_RECEIVED, then the service_callback
thread is deadlocked.
Remove the bulk_mutex so that multiple receives can be scheduled at a
time.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
.../vc04_services/bcm2835-camera/mmal-vchiq.c | 48 +------------------
1 file changed, 1 insertion(+), 47 deletions(-)
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
@@ -165,9 +165,6 @@ struct vchiq_mmal_instance {
/* ensure serialised access to service */
struct mutex vchiq_mutex;
- /* ensure serialised access to bulk operations */
- struct mutex bulk_mutex;
-
/* vmalloc page to receive scratch bulk xfers into */
void *bulk_scratch;
@@ -335,13 +332,6 @@ static int bulk_receive(struct vchiq_mma
unsigned long flags = 0;
int ret;
- /* bulk mutex stops other bulk operations while we have a
- * receive in progress - released in callback
- */
- ret = mutex_lock_interruptible(&instance->bulk_mutex);
- if (ret != 0)
- return ret;
-
rd_len = msg->u.buffer_from_host.buffer_header.length;
/* take buffer from queue */
@@ -360,8 +350,6 @@ static int bulk_receive(struct vchiq_mma
* waiting bulk receive?
*/
- mutex_unlock(&instance->bulk_mutex);
-
return -EINVAL;
}
@@ -402,11 +390,6 @@ static int bulk_receive(struct vchiq_mma
vchi_service_release(instance->handle);
- if (ret != 0) {
- /* callback will not be clearing the mutex */
- mutex_unlock(&instance->bulk_mutex);
- }
-
return ret;
}
@@ -416,13 +399,6 @@ static int dummy_bulk_receive(struct vch
{
int ret;
- /* bulk mutex stops other bulk operations while we have a
- * receive in progress - released in callback
- */
- ret = mutex_lock_interruptible(&instance->bulk_mutex);
- if (ret != 0)
- return ret;
-
/* zero length indicates this was a dummy transfer */
msg_context->u.bulk.buffer_used = 0;
@@ -438,11 +414,6 @@ static int dummy_bulk_receive(struct vch
vchi_service_release(instance->handle);
- if (ret != 0) {
- /* callback will not be clearing the mutex */
- mutex_unlock(&instance->bulk_mutex);
- }
-
return ret;
}
@@ -497,18 +468,11 @@ buffer_from_host(struct vchiq_mmal_insta
pr_debug("instance:%p buffer:%p\n", instance->handle, buf);
- /* bulk mutex stops other bulk operations while we
- * have a receive in progress
- */
- if (mutex_lock_interruptible(&instance->bulk_mutex))
- return -EINTR;
-
/* get context */
if (!buf->msg_context) {
pr_err("%s: msg_context not allocated, buf %p\n", __func__,
buf);
- ret = -EINVAL;
- goto unlock;
+ return -EINVAL;
}
msg_context = buf->msg_context;
@@ -562,9 +526,6 @@ buffer_from_host(struct vchiq_mmal_insta
vchi_service_release(instance->handle);
-unlock:
- mutex_unlock(&instance->bulk_mutex);
-
return ret;
}
@@ -688,9 +649,6 @@ static void buffer_to_host_cb(struct vch
static void bulk_receive_cb(struct vchiq_mmal_instance *instance,
struct mmal_msg_context *msg_context)
{
- /* bulk receive operation complete */
- mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex);
-
/* replace the buffer header */
port_buffer_from_host(msg_context->u.bulk.instance,
msg_context->u.bulk.port);
@@ -706,9 +664,6 @@ static void bulk_abort_cb(struct vchiq_m
{
pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context);
- /* bulk receive operation complete */
- mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex);
-
/* replace the buffer header */
port_buffer_from_host(msg_context->u.bulk.instance,
msg_context->u.bulk.port);
@@ -2047,7 +2002,6 @@ int vchiq_mmal_init(struct vchiq_mmal_in
return -ENOMEM;
mutex_init(&instance->vchiq_mutex);
- mutex_init(&instance->bulk_mutex);
instance->bulk_scratch = vmalloc(PAGE_SIZE);