You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0027-clk-bcm2835-Add-cl...

103 lines
3.2 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 7a4c12de72b705c93482f3dd28b230ced588052f Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 13 Feb 2017 17:20:08 +0000
Subject: [PATCH 027/454] clk-bcm2835: Add claim-clocks property
The claim-clocks property can be used to prevent PLLs and dividers
from being marked as critical. It contains a vector of clock IDs,
as defined by dt-bindings/clock/bcm2835.h.
Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and
PLLH_PIX for the vc4_kms_v3d driver.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
drivers/clk/bcm/clk-bcm2835.c | 34 ++++++++++++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1329,6 +1329,8 @@ static const struct clk_ops bcm2835_vpu_
.debug_init = bcm2835_clock_debug_init,
};
+static bool bcm2835_clk_is_claimed(const char *name);
+
static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
const struct bcm2835_pll_data *data)
{
@@ -1345,6 +1347,9 @@ static struct clk_hw *bcm2835_register_p
init.ops = &bcm2835_pll_clk_ops;
init.flags = CLK_IGNORE_UNUSED;
+ if (!bcm2835_clk_is_claimed(data->name))
+ init.flags |= CLK_IS_CRITICAL;
+
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return NULL;
@@ -1398,8 +1403,10 @@ bcm2835_register_pll_divider(struct bcm2
divider->div.table = NULL;
if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
- init.flags |= CLK_IS_CRITICAL;
- divider->div.flags |= CLK_IS_CRITICAL;
+ if (!bcm2835_clk_is_claimed(data->source_pll))
+ init.flags |= CLK_IS_CRITICAL;
+ if (!bcm2835_clk_is_claimed(data->name))
+ divider->div.flags |= CLK_IS_CRITICAL;
}
divider->cprman = cprman;
@@ -2152,6 +2159,8 @@ static const struct bcm2835_clk_desc clk
.ctl_reg = CM_PERIICTL),
};
+static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)];
+
/*
* Permanently take a reference on the parent of the SDRAM clock.
*
@@ -2171,6 +2180,19 @@ static int bcm2835_mark_sdc_parent_criti
return clk_prepare_enable(parent);
}
+static bool bcm2835_clk_is_claimed(const char *name)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {
+ const char *clk_name = *(const char **)(clk_desc_array[i].data);
+ if (!strcmp(name, clk_name))
+ return bcm2835_clk_claimed[i];
+ }
+
+ return false;
+}
+
static int bcm2835_clk_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -2180,6 +2202,7 @@ static int bcm2835_clk_probe(struct plat
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
size_t i;
+ u32 clk_id;
int ret;
cprman = devm_kzalloc(dev, sizeof(*cprman) +
@@ -2195,6 +2218,13 @@ static int bcm2835_clk_probe(struct plat
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);
+ memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed));
+ for (i = 0;
+ !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks",
+ i, &clk_id);
+ i++)
+ bcm2835_clk_claimed[clk_id]= true;
+
memcpy(cprman->real_parent_names, cprman_parent_names,
sizeof(cprman_parent_names));
of_clk_parent_fill(dev->of_node, cprman->real_parent_names,