You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/brcm2708/patches-4.14/950-0400-staging-bcm2835-ca...

62 lines
2.2 KiB
Diff

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 52499594ce8b48c434bed29062c8bbc15b96cc96 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Wed, 21 Feb 2018 15:39:26 +0000
Subject: [PATCH 400/454] staging: bcm2835-camera: Fix missing lines between
items
Fix checkpatch errors for missing blank lines after variable
or structure declarations.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
.../staging/vc04_services/bcm2835-camera/bcm2835-camera.h | 1 +
drivers/staging/vc04_services/bcm2835-camera/controls.c | 2 ++
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 6 ++++--
3 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
@@ -133,6 +133,7 @@ int set_framerate_params(struct bm2835_m
(pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \
(pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \
}
+
#define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \
{ \
v4l2_dbg(level, debug, dev, \
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -56,6 +56,7 @@ static const s64 ev_bias_qmenu[] = {
static const s64 iso_qmenu[] = {
0, 100000, 200000, 400000, 800000,
};
+
static const uint32_t iso_values[] = {
0, 100, 200, 400, 800,
};
@@ -1272,6 +1273,7 @@ int bm2835_mmal_init_controls(struct bm2
* mismatches.
*/
int i;
+
mask = 1 << V4L2_SCENE_MODE_NONE;
for (i = 0;
i < ARRAY_SIZE(scene_configs);
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
@@ -1886,10 +1886,12 @@ int vchiq_mmal_finalise(struct vchiq_mma
int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance)
{
- int status;
- struct vchiq_mmal_instance *instance;
static VCHI_CONNECTION_T *vchi_connection;
+
static VCHI_INSTANCE_T vchi_instance;
+
+ struct vchiq_mmal_instance *instance;
+ int status;
SERVICE_CREATION_T params = {
.version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER),
.service_id = VC_MMAL_SERVER_NAME,