|
|
|
|
# CONFIG_AIO is not set
|
|
|
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
|
CONFIG_ARCH_CLOCKSOURCE_DATA=y
|
|
|
|
|
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
|
|
|
|
|
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
|
|
|
|
|
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
|
|
|
|
|
CONFIG_ARCH_HAS_SET_MEMORY=y
|
|
|
|
|
CONFIG_ARCH_HAS_SG_CHAIN=y
|
|
|
|
|
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
|
|
|
|
|
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
|
|
|
|
|
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
|
|
|
|
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
|
|
|
|
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
|
|
|
CONFIG_ARCH_MEDIATEK=y
|
|
|
|
|
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
|
|
|
|
CONFIG_ARCH_MULTIPLATFORM=y
|
|
|
|
|
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
|
|
|
|
|
CONFIG_ARCH_MULTI_V6_V7=y
|
|
|
|
|
CONFIG_ARCH_MULTI_V7=y
|
|
|
|
|
CONFIG_ARCH_NR_GPIO=0
|
|
|
|
|
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
|
|
|
|
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
|
|
|
|
|
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
|
|
|
|
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
|
|
|
|
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
|
|
|
|
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
|
|
|
|
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
|
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
|
|
|
|
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
|
|
|
|
|
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
|
|
|
|
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
|
|
|
|
CONFIG_ARM=y
|
|
|
|
|
CONFIG_ARM_APPENDED_DTB=y
|
|
|
|
|
CONFIG_ARM_ARCH_TIMER=y
|
|
|
|
|
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
|
|
|
|
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
|
|
|
|
|
CONFIG_ARM_CPU_SUSPEND=y
|
|
|
|
|
# CONFIG_ARM_CPU_TOPOLOGY is not set
|
|
|
|
|
CONFIG_ARM_GIC=y
|
|
|
|
|
CONFIG_ARM_HAS_SG_CHAIN=y
|
|
|
|
|
CONFIG_ARM_L1_CACHE_SHIFT=6
|
|
|
|
|
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
|
|
|
|
# CONFIG_ARM_LPAE is not set
|
|
|
|
|
CONFIG_ARM_MEDIATEK_CPUFREQ=y
|
|
|
|
|
CONFIG_ARM_PATCH_IDIV=y
|
|
|
|
|
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
|
|
|
|
# CONFIG_ARM_SMMU is not set
|
|
|
|
|
CONFIG_ARM_THUMB=y
|
|
|
|
|
CONFIG_ARM_THUMBEE=y
|
|
|
|
|
CONFIG_ARM_UNWIND=y
|
|
|
|
|
CONFIG_ARM_VIRT_EXT=y
|
|
|
|
|
CONFIG_ATAGS=y
|
|
|
|
|
CONFIG_AUTO_ZRELADDR=y
|
mediatek: Add support for the UniElec U7623-02
This commit adds support for the MT7623A-based UniElec U7623-02 router,
with eMMC storage and 512MB RAM. The router can be delivered with NAND
Flash and more memory, but I only have access to the one configuration.
The DTS is structured in such a way that adding support for
more/different storage/memory should be straight forward.
The device has the following specifications:
* MT7623A (quad-core, 1.3 GHz)
* 512MB RAM (DDR3)
* 8GB storage (eMMC 4.5)
* 2x normal miniPCIe slots
* 1x miniPCIe slot that is connected via an internal USB OTG port
* 5x 1Gbps Ethernet (MT7530 switch)
* 1x UART header
* 1x USB 3.0 port
* 1x SATA 3.0
* 1x 40P*0.5mm FPC for MIPI LCD
* 1x SIM slot
* 12x LEDs (2 GPIO controlled)
* 1x reset button
* 1x DC jack for main power (12V)
The following has been tested and is working:
* Ethernet switch
* miniPCIe slots (tested with Wi-Fi cards)
* USB 3.0 port
* sysupgrade
* reset button
Not working:
* The miniPCIe connected via USB OTG. For the port to work, some MUSB
glue must be added. I am currently in the process of porting the glue
from the vendor SDK.
Not tested:
* SATA 3.0
* MIPI LCD
Installation:
The board ships with u-boot, and the first installation needs to be done
via the bootloader using tftp. Step number one is to update the MBR of
the eMMC, as the one that ships with the device is broken. Since the
device can ship with different storage sizes, I will not provide the
exact steps for creating a valid MBR. However, I have made some
assumptions about the disk layout - there must be one 8MB recovery
partition (FAT32) and a partition for the rootfs (Linux).
The board loads the kernel from block 0xA00 (2560) and I have reserved
32MB for the kernel (65536 blocks). I have aligned the partitions on the
erase block size (4096 byte), so the recovery partition must start on
block 69632 and end on 86016 (16385 sectors). The rootfs is assumed to
start on sector 90112.
In order to install the mbr, you run the following commands from the
u-boot command line:
* tftpboot ${loadaddr} <name of mbr file>
* mmc device 0
* mmc write ${loadaddr} 0x00 1
Run the following commands to install + boot OpenWRT:
* tftpboot ${loadaddr} openwrt-mediatek-mt7623-7623a-unielec-u7623-02-emmc-512m-squashfs-sysupgrade-emmc.bin.gz
* run boot_wr_img
* run boot_rd_img
* bootm
Recovery:
In order to recover the router, you need to follow the installation
steps above (no need to replace MBR).
Notes:
* F2FS is used as the overlay filesystem.
* The device does not ship with any valid MAC address, so a random
address has to be generated. As a work-around, I write the initial
random MAC to a file on the recovery partition. The MAC of the WAN
interface is set to the MAC-address contained in this file on each boot,
and the address of the LAN-interfaces are WAN + 1. The MAC file is kept
across sysupgrade/firstboot.
My approach is slightly different than what the stock image does. The
first fives bytes of the MAC addresses in the stock image are static,
and then the last byte is random. I believe it is better to create fully
random MAC addresses.
* In order to support the miniPCIe-slots, I needed to add missing
pcie-nodes to mt7623.dtsi. The nodes are just c&p from the upstream
dtsi.
* One of the USB3.0 phys (u3phy2) on the board can be used as either USB
or PCI, and one of the wifi-cards is connected to this phy. In order to
support switching the phy from USB to PCI, I needed to patch the
phy-driver. The patch is based on a rejected (at least last time I
checked) PCI-driver submitted to the linux-mediatek mailing list.
* The eMMC is configured to boot from the user area, and according to
the data sheet of the eMMC this value can't be changed.
* I tried to structure the MBR more nicely and use for example a
FAT32-parition for the kernel, so that we don't need to write/read from
some offset. The bootloader does not support reading from
FAT32-paritions. While the command (fatload) is there, it just throws an
error when I try to use it.
* I will submit and hope to get the DTS for the device accepted
upstream. If and when that happens, I will update the patches
accordingly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
6 years ago
|
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
|
|
|
CONFIG_BLK_MQ_PCI=y
|
|
|
|
|
CONFIG_BOUNCE=y
|
|
|
|
|
# CONFIG_CACHE_L2X0 is not set
|
|
|
|
|
CONFIG_CC_STACKPROTECTOR=y
|
|
|
|
|
# CONFIG_CC_STACKPROTECTOR_NONE is not set
|
|
|
|
|
CONFIG_CC_STACKPROTECTOR_REGULAR=y
|
|
|
|
|
CONFIG_CLEANCACHE=y
|
|
|
|
|
CONFIG_CLKDEV_LOOKUP=y
|
|
|
|
|
CONFIG_CLKSRC_MMIO=y
|
|
|
|
|
CONFIG_CLONE_BACKWARDS=y
|
|
|
|
|
CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2"
|
|
|
|
|
CONFIG_CMDLINE_FROM_BOOTLOADER=y
|
|
|
|
|
CONFIG_COMMON_CLK=y
|
|
|
|
|
CONFIG_COMMON_CLK_MEDIATEK=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_MMSYS=y
|
|
|
|
|
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
|
|
|
|
|
# CONFIG_COMMON_CLK_MT7622 is not set
|
|
|
|
|
# CONFIG_COMMON_CLK_MT8135 is not set
|
|
|
|
|
# CONFIG_COMMON_CLK_MT8173 is not set
|
|
|
|
|
CONFIG_COREDUMP=y
|
|
|
|
|
# CONFIG_CPUFREQ_DT is not set
|
|
|
|
|
CONFIG_CPU_32v6K=y
|
|
|
|
|
CONFIG_CPU_32v7=y
|
|
|
|
|
CONFIG_CPU_ABRT_EV7=y
|
|
|
|
|
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
|
|
|
|
CONFIG_CPU_CACHE_V7=y
|
|
|
|
|
CONFIG_CPU_CACHE_VIPT=y
|
|
|
|
|
CONFIG_CPU_COPY_V6=y
|
|
|
|
|
CONFIG_CPU_CP15=y
|
|
|
|
|
CONFIG_CPU_CP15_MMU=y
|
|
|
|
|
CONFIG_CPU_FREQ=y
|
|
|
|
|
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_COMMON=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
|
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
|
|
|
|
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
|
|
|
|
CONFIG_CPU_FREQ_STAT=y
|
|
|
|
|
CONFIG_CPU_HAS_ASID=y
|
|
|
|
|
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
|
|
|
|
|
# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
|
|
|
CONFIG_CPU_PABRT_V7=y
|
|
|
|
|
CONFIG_CPU_PM=y
|
|
|
|
|
CONFIG_CPU_RMAP=y
|
|
|
|
|
# CONFIG_CPU_THERMAL is not set
|
|
|
|
|
CONFIG_CPU_THUMB_CAPABLE=y
|
|
|
|
|
CONFIG_CPU_TLB_V7=y
|
|
|
|
|
CONFIG_CPU_V7=y
|
|
|
|
|
CONFIG_CRC16=y
|
|
|
|
|
# CONFIG_CRC32_SARWATE is not set
|
|
|
|
|
CONFIG_CRC32_SLICEBY8=y
|
|
|
|
|
CONFIG_CROSS_MEMORY_ATTACH=y
|
|
|
|
|
CONFIG_CRYPTO_ACOMP2=y
|
|
|
|
|
CONFIG_CRYPTO_AEAD=y
|
|
|
|
|
CONFIG_CRYPTO_AEAD2=y
|
mediatek: Add support for the UniElec U7623-02
This commit adds support for the MT7623A-based UniElec U7623-02 router,
with eMMC storage and 512MB RAM. The router can be delivered with NAND
Flash and more memory, but I only have access to the one configuration.
The DTS is structured in such a way that adding support for
more/different storage/memory should be straight forward.
The device has the following specifications:
* MT7623A (quad-core, 1.3 GHz)
* 512MB RAM (DDR3)
* 8GB storage (eMMC 4.5)
* 2x normal miniPCIe slots
* 1x miniPCIe slot that is connected via an internal USB OTG port
* 5x 1Gbps Ethernet (MT7530 switch)
* 1x UART header
* 1x USB 3.0 port
* 1x SATA 3.0
* 1x 40P*0.5mm FPC for MIPI LCD
* 1x SIM slot
* 12x LEDs (2 GPIO controlled)
* 1x reset button
* 1x DC jack for main power (12V)
The following has been tested and is working:
* Ethernet switch
* miniPCIe slots (tested with Wi-Fi cards)
* USB 3.0 port
* sysupgrade
* reset button
Not working:
* The miniPCIe connected via USB OTG. For the port to work, some MUSB
glue must be added. I am currently in the process of porting the glue
from the vendor SDK.
Not tested:
* SATA 3.0
* MIPI LCD
Installation:
The board ships with u-boot, and the first installation needs to be done
via the bootloader using tftp. Step number one is to update the MBR of
the eMMC, as the one that ships with the device is broken. Since the
device can ship with different storage sizes, I will not provide the
exact steps for creating a valid MBR. However, I have made some
assumptions about the disk layout - there must be one 8MB recovery
partition (FAT32) and a partition for the rootfs (Linux).
The board loads the kernel from block 0xA00 (2560) and I have reserved
32MB for the kernel (65536 blocks). I have aligned the partitions on the
erase block size (4096 byte), so the recovery partition must start on
block 69632 and end on 86016 (16385 sectors). The rootfs is assumed to
start on sector 90112.
In order to install the mbr, you run the following commands from the
u-boot command line:
* tftpboot ${loadaddr} <name of mbr file>
* mmc device 0
* mmc write ${loadaddr} 0x00 1
Run the following commands to install + boot OpenWRT:
* tftpboot ${loadaddr} openwrt-mediatek-mt7623-7623a-unielec-u7623-02-emmc-512m-squashfs-sysupgrade-emmc.bin.gz
* run boot_wr_img
* run boot_rd_img
* bootm
Recovery:
In order to recover the router, you need to follow the installation
steps above (no need to replace MBR).
Notes:
* F2FS is used as the overlay filesystem.
* The device does not ship with any valid MAC address, so a random
address has to be generated. As a work-around, I write the initial
random MAC to a file on the recovery partition. The MAC of the WAN
interface is set to the MAC-address contained in this file on each boot,
and the address of the LAN-interfaces are WAN + 1. The MAC file is kept
across sysupgrade/firstboot.
My approach is slightly different than what the stock image does. The
first fives bytes of the MAC addresses in the stock image are static,
and then the last byte is random. I believe it is better to create fully
random MAC addresses.
* In order to support the miniPCIe-slots, I needed to add missing
pcie-nodes to mt7623.dtsi. The nodes are just c&p from the upstream
dtsi.
* One of the USB3.0 phys (u3phy2) on the board can be used as either USB
or PCI, and one of the wifi-cards is connected to this phy. In order to
support switching the phy from USB to PCI, I needed to patch the
phy-driver. The patch is based on a rejected (at least last time I
checked) PCI-driver submitted to the linux-mediatek mailing list.
* The eMMC is configured to boot from the user area, and according to
the data sheet of the eMMC this value can't be changed.
* I tried to structure the MBR more nicely and use for example a
FAT32-parition for the kernel, so that we don't need to write/read from
some offset. The bootloader does not support reading from
FAT32-paritions. While the command (fatload) is there, it just throws an
error when I try to use it.
* I will submit and hope to get the DTS for the device accepted
upstream. If and when that happens, I will update the patches
accordingly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
6 years ago
|
|
|
CONFIG_CRYPTO_CRC32=y
|
|
|
|
|
CONFIG_CRYPTO_CRC32C=y
|
|
|
|
|
CONFIG_CRYPTO_CTR=y
|
|
|
|
|
CONFIG_CRYPTO_DEFLATE=y
|
|
|
|
|
CONFIG_CRYPTO_DEV_MEDIATEK=y
|
|
|
|
|
CONFIG_CRYPTO_DRBG=y
|
|
|
|
|
CONFIG_CRYPTO_DRBG_HMAC=y
|
|
|
|
|
CONFIG_CRYPTO_DRBG_MENU=y
|
|
|
|
|
CONFIG_CRYPTO_HASH=y
|
|
|
|
|
CONFIG_CRYPTO_HASH2=y
|
|
|
|
|
CONFIG_CRYPTO_HMAC=y
|
|
|
|
|
CONFIG_CRYPTO_HW=y
|
|
|
|
|
CONFIG_CRYPTO_JITTERENTROPY=y
|
|
|
|
|
CONFIG_CRYPTO_LZO=y
|
|
|
|
|
CONFIG_CRYPTO_MANAGER=y
|
|
|
|
|
CONFIG_CRYPTO_MANAGER2=y
|
|
|
|
|
CONFIG_CRYPTO_NULL=y
|
|
|
|
|
CONFIG_CRYPTO_NULL2=y
|
|
|
|
|
CONFIG_CRYPTO_RNG=y
|
|
|
|
|
CONFIG_CRYPTO_RNG2=y
|
|
|
|
|
CONFIG_CRYPTO_RNG_DEFAULT=y
|
|
|
|
|
CONFIG_CRYPTO_SEQIV=y
|
|
|
|
|
CONFIG_CRYPTO_SHA1=y
|
|
|
|
|
CONFIG_CRYPTO_SHA256=y
|
|
|
|
|
CONFIG_CRYPTO_SHA512=y
|
|
|
|
|
CONFIG_CRYPTO_WORKQUEUE=y
|
|
|
|
|
CONFIG_DCACHE_WORD_ACCESS=y
|
|
|
|
|
CONFIG_DEBUG_ALIGN_RODATA=y
|
|
|
|
|
CONFIG_DEBUG_BUGVERBOSE=y
|
|
|
|
|
CONFIG_DEBUG_GPIO=y
|
|
|
|
|
CONFIG_DEBUG_INFO=y
|
|
|
|
|
CONFIG_DEBUG_LL=y
|
|
|
|
|
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
|
|
|
|
|
CONFIG_DEBUG_MT6589_UART0=y
|
|
|
|
|
# CONFIG_DEBUG_MT8127_UART0 is not set
|
|
|
|
|
# CONFIG_DEBUG_MT8135_UART3 is not set
|
|
|
|
|
CONFIG_DEBUG_PREEMPT=y
|
|
|
|
|
CONFIG_DEBUG_UART_8250=y
|
|
|
|
|
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
|
|
|
|
|
CONFIG_DEBUG_UART_8250_SHIFT=2
|
|
|
|
|
# CONFIG_DEBUG_UART_8250_WORD is not set
|
|
|
|
|
CONFIG_DEBUG_UART_PHYS=0x11004000
|
|
|
|
|
CONFIG_DEBUG_UART_VIRT=0xf1004000
|
|
|
|
|
CONFIG_DEBUG_UNCOMPRESS=y
|
|
|
|
|
# CONFIG_DEBUG_USER is not set
|
|
|
|
|
CONFIG_DMADEVICES=y
|
|
|
|
|
CONFIG_DMA_ENGINE=y
|
|
|
|
|
CONFIG_DMA_OF=y
|
|
|
|
|
CONFIG_DTC=y
|
|
|
|
|
CONFIG_EARLY_PRINTK=y
|
|
|
|
|
CONFIG_EDAC_ATOMIC_SCRUB=y
|
|
|
|
|
CONFIG_EDAC_SUPPORT=y
|
|
|
|
|
CONFIG_ELF_CORE=y
|
mediatek: Add support for the UniElec U7623-02
This commit adds support for the MT7623A-based UniElec U7623-02 router,
with eMMC storage and 512MB RAM. The router can be delivered with NAND
Flash and more memory, but I only have access to the one configuration.
The DTS is structured in such a way that adding support for
more/different storage/memory should be straight forward.
The device has the following specifications:
* MT7623A (quad-core, 1.3 GHz)
* 512MB RAM (DDR3)
* 8GB storage (eMMC 4.5)
* 2x normal miniPCIe slots
* 1x miniPCIe slot that is connected via an internal USB OTG port
* 5x 1Gbps Ethernet (MT7530 switch)
* 1x UART header
* 1x USB 3.0 port
* 1x SATA 3.0
* 1x 40P*0.5mm FPC for MIPI LCD
* 1x SIM slot
* 12x LEDs (2 GPIO controlled)
* 1x reset button
* 1x DC jack for main power (12V)
The following has been tested and is working:
* Ethernet switch
* miniPCIe slots (tested with Wi-Fi cards)
* USB 3.0 port
* sysupgrade
* reset button
Not working:
* The miniPCIe connected via USB OTG. For the port to work, some MUSB
glue must be added. I am currently in the process of porting the glue
from the vendor SDK.
Not tested:
* SATA 3.0
* MIPI LCD
Installation:
The board ships with u-boot, and the first installation needs to be done
via the bootloader using tftp. Step number one is to update the MBR of
the eMMC, as the one that ships with the device is broken. Since the
device can ship with different storage sizes, I will not provide the
exact steps for creating a valid MBR. However, I have made some
assumptions about the disk layout - there must be one 8MB recovery
partition (FAT32) and a partition for the rootfs (Linux).
The board loads the kernel from block 0xA00 (2560) and I have reserved
32MB for the kernel (65536 blocks). I have aligned the partitions on the
erase block size (4096 byte), so the recovery partition must start on
block 69632 and end on 86016 (16385 sectors). The rootfs is assumed to
start on sector 90112.
In order to install the mbr, you run the following commands from the
u-boot command line:
* tftpboot ${loadaddr} <name of mbr file>
* mmc device 0
* mmc write ${loadaddr} 0x00 1
Run the following commands to install + boot OpenWRT:
* tftpboot ${loadaddr} openwrt-mediatek-mt7623-7623a-unielec-u7623-02-emmc-512m-squashfs-sysupgrade-emmc.bin.gz
* run boot_wr_img
* run boot_rd_img
* bootm
Recovery:
In order to recover the router, you need to follow the installation
steps above (no need to replace MBR).
Notes:
* F2FS is used as the overlay filesystem.
* The device does not ship with any valid MAC address, so a random
address has to be generated. As a work-around, I write the initial
random MAC to a file on the recovery partition. The MAC of the WAN
interface is set to the MAC-address contained in this file on each boot,
and the address of the LAN-interfaces are WAN + 1. The MAC file is kept
across sysupgrade/firstboot.
My approach is slightly different than what the stock image does. The
first fives bytes of the MAC addresses in the stock image are static,
and then the last byte is random. I believe it is better to create fully
random MAC addresses.
* In order to support the miniPCIe-slots, I needed to add missing
pcie-nodes to mt7623.dtsi. The nodes are just c&p from the upstream
dtsi.
* One of the USB3.0 phys (u3phy2) on the board can be used as either USB
or PCI, and one of the wifi-cards is connected to this phy. In order to
support switching the phy from USB to PCI, I needed to patch the
phy-driver. The patch is based on a rejected (at least last time I
checked) PCI-driver submitted to the linux-mediatek mailing list.
* The eMMC is configured to boot from the user area, and according to
the data sheet of the eMMC this value can't be changed.
* I tried to structure the MBR more nicely and use for example a
FAT32-parition for the kernel, so that we don't need to write/read from
some offset. The bootloader does not support reading from
FAT32-paritions. While the command (fatload) is there, it just throws an
error when I try to use it.
* I will submit and hope to get the DTS for the device accepted
upstream. If and when that happens, I will update the patches
accordingly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
6 years ago
|
|
|
CONFIG_EXT4_FS=y
|
|
|
|
|
# CONFIG_F2FS_CHECK_FS is not set
|
|
|
|
|
CONFIG_F2FS_FS=y
|
|
|
|
|
# CONFIG_F2FS_FS_SECURITY is not set
|
|
|
|
|
CONFIG_F2FS_FS_XATTR=y
|
|
|
|
|
CONFIG_F2FS_STAT_FS=y
|
|
|
|
|
CONFIG_FIXED_PHY=y
|
|
|
|
|
CONFIG_FIX_EARLYCON_MEM=y
|
|
|
|
|
CONFIG_FREEZER=y
|
mediatek: Add support for the UniElec U7623-02
This commit adds support for the MT7623A-based UniElec U7623-02 router,
with eMMC storage and 512MB RAM. The router can be delivered with NAND
Flash and more memory, but I only have access to the one configuration.
The DTS is structured in such a way that adding support for
more/different storage/memory should be straight forward.
The device has the following specifications:
* MT7623A (quad-core, 1.3 GHz)
* 512MB RAM (DDR3)
* 8GB storage (eMMC 4.5)
* 2x normal miniPCIe slots
* 1x miniPCIe slot that is connected via an internal USB OTG port
* 5x 1Gbps Ethernet (MT7530 switch)
* 1x UART header
* 1x USB 3.0 port
* 1x SATA 3.0
* 1x 40P*0.5mm FPC for MIPI LCD
* 1x SIM slot
* 12x LEDs (2 GPIO controlled)
* 1x reset button
* 1x DC jack for main power (12V)
The following has been tested and is working:
* Ethernet switch
* miniPCIe slots (tested with Wi-Fi cards)
* USB 3.0 port
* sysupgrade
* reset button
Not working:
* The miniPCIe connected via USB OTG. For the port to work, some MUSB
glue must be added. I am currently in the process of porting the glue
from the vendor SDK.
Not tested:
* SATA 3.0
* MIPI LCD
Installation:
The board ships with u-boot, and the first installation needs to be done
via the bootloader using tftp. Step number one is to update the MBR of
the eMMC, as the one that ships with the device is broken. Since the
device can ship with different storage sizes, I will not provide the
exact steps for creating a valid MBR. However, I have made some
assumptions about the disk layout - there must be one 8MB recovery
partition (FAT32) and a partition for the rootfs (Linux).
The board loads the kernel from block 0xA00 (2560) and I have reserved
32MB for the kernel (65536 blocks). I have aligned the partitions on the
erase block size (4096 byte), so the recovery partition must start on
block 69632 and end on 86016 (16385 sectors). The rootfs is assumed to
start on sector 90112.
In order to install the mbr, you run the following commands from the
u-boot command line:
* tftpboot ${loadaddr} <name of mbr file>
* mmc device 0
* mmc write ${loadaddr} 0x00 1
Run the following commands to install + boot OpenWRT:
* tftpboot ${loadaddr} openwrt-mediatek-mt7623-7623a-unielec-u7623-02-emmc-512m-squashfs-sysupgrade-emmc.bin.gz
* run boot_wr_img
* run boot_rd_img
* bootm
Recovery:
In order to recover the router, you need to follow the installation
steps above (no need to replace MBR).
Notes:
* F2FS is used as the overlay filesystem.
* The device does not ship with any valid MAC address, so a random
address has to be generated. As a work-around, I write the initial
random MAC to a file on the recovery partition. The MAC of the WAN
interface is set to the MAC-address contained in this file on each boot,
and the address of the LAN-interfaces are WAN + 1. The MAC file is kept
across sysupgrade/firstboot.
My approach is slightly different than what the stock image does. The
first fives bytes of the MAC addresses in the stock image are static,
and then the last byte is random. I believe it is better to create fully
random MAC addresses.
* In order to support the miniPCIe-slots, I needed to add missing
pcie-nodes to mt7623.dtsi. The nodes are just c&p from the upstream
dtsi.
* One of the USB3.0 phys (u3phy2) on the board can be used as either USB
or PCI, and one of the wifi-cards is connected to this phy. In order to
support switching the phy from USB to PCI, I needed to patch the
phy-driver. The patch is based on a rejected (at least last time I
checked) PCI-driver submitted to the linux-mediatek mailing list.
* The eMMC is configured to boot from the user area, and according to
the data sheet of the eMMC this value can't be changed.
* I tried to structure the MBR more nicely and use for example a
FAT32-parition for the kernel, so that we don't need to write/read from
some offset. The bootloader does not support reading from
FAT32-paritions. While the command (fatload) is there, it just throws an
error when I try to use it.
* I will submit and hope to get the DTS for the device accepted
upstream. If and when that happens, I will update the patches
accordingly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
6 years ago
|
|
|
CONFIG_FS_MBCACHE=y
|
|
|
|
|
CONFIG_GENERIC_ALLOCATOR=y
|
|
|
|
|
CONFIG_GENERIC_BUG=y
|
|
|
|
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
|
|
|
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
|
|
|
|
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
|
|
|
|
CONFIG_GENERIC_EARLY_IOREMAP=y
|
|
|
|
|
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
|
|
|
|
CONFIG_GENERIC_IO=y
|
|
|
|
|
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
|
|
|
|
CONFIG_GENERIC_IRQ_SHOW=y
|
|
|
|
|
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
|
|
|
|
CONFIG_GENERIC_MSI_IRQ=y
|
|
|
|
|
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
|
|
|
|
CONFIG_GENERIC_PCI_IOMAP=y
|
|
|
|
|
CONFIG_GENERIC_PHY=y
|
|
|
|
|
CONFIG_GENERIC_PINCONF=y
|
|
|
|
|
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
|
|
|
|
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
|
|
|
|
CONFIG_GENERIC_SCHED_CLOCK=y
|
|
|
|
|
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
|
|
|
|
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
|
|
|
|
CONFIG_GENERIC_STRNLEN_USER=y
|
|
|
|
|
CONFIG_GPIOLIB=y
|
|
|
|
|
CONFIG_GPIO_SYSFS=y
|
|
|
|
|
# CONFIG_GRO_CELLS is not set
|
|
|
|
|
CONFIG_HANDLE_DOMAIN_IRQ=y
|
|
|
|
|
CONFIG_HARDEN_BRANCH_PREDICTOR=y
|
|
|
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
|
|
|
CONFIG_HAS_DMA=y
|
|
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
|
CONFIG_HAS_IOPORT_MAP=y
|
|
|
|
|
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
|
|
|
|
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
|
|
|
|
CONFIG_HAVE_ARCH_BITREVERSE=y
|
|
|
|
|
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
|
|
|
|
CONFIG_HAVE_ARCH_KGDB=y
|
|
|
|
|
CONFIG_HAVE_ARCH_PFN_VALID=y
|
|
|
|
|
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
|
|
|
|
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
|
|
|
|
CONFIG_HAVE_ARM_ARCH_TIMER=y
|
|
|
|
|
CONFIG_HAVE_ARM_SMCCC=y
|
|
|
|
|
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
|
|
|
|
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
|
|
|
|
CONFIG_HAVE_CLK=y
|
|
|
|
|
CONFIG_HAVE_CLK_PREPARE=y
|
|
|
|
|
CONFIG_HAVE_CONTEXT_TRACKING=y
|
|
|
|
|
CONFIG_HAVE_C_RECORDMCOUNT=y
|
|
|
|
|
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
|
|
|
|
CONFIG_HAVE_DMA_API_DEBUG=y
|
|
|
|
|
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
|
|
|
|
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
|
|
|
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
|
|
|
|
|
CONFIG_HAVE_EBPF_JIT=y
|
|
|
|
|
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
|
|
|
|
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
|
|
|
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
|
|
|
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
|
|
|
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
|
|
|
CONFIG_HAVE_IDE=y
|
|
|
|
|
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
|
|
|
|
CONFIG_HAVE_MEMBLOCK=y
|
|
|
|
|
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
|
|
|
|
CONFIG_HAVE_NET_DSA=y
|
|
|
|
|
CONFIG_HAVE_OPROFILE=y
|
|
|
|
|
CONFIG_HAVE_OPTPROBES=y
|
|
|
|
|
CONFIG_HAVE_PERF_EVENTS=y
|
|
|
|
|
CONFIG_HAVE_PERF_REGS=y
|
|
|
|
|
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
|
|
|
|
CONFIG_HAVE_PROC_CPU=y
|
|
|
|
|
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
|
|
|
|
CONFIG_HAVE_SMP=y
|
|
|
|
|
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
|
|
|
|
CONFIG_HAVE_UID16=y
|
|
|
|
|
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
|
|
|
|
|
CONFIG_HIGHMEM=y
|
|
|
|
|
# CONFIG_HIGHPTE is not set
|
|
|
|
|
CONFIG_HOTPLUG_CPU=y
|
|
|
|
|
CONFIG_HWMON=y
|
|
|
|
|
CONFIG_HW_RANDOM=y
|
|
|
|
|
CONFIG_HW_RANDOM_MTK=y
|
|
|
|
|
CONFIG_HZ_FIXED=0
|
|
|
|
|
CONFIG_I2C=y
|
|
|
|
|
CONFIG_I2C_BOARDINFO=y
|
|
|
|
|
CONFIG_I2C_CHARDEV=y
|
|
|
|
|
CONFIG_I2C_MT65XX=y
|
|
|
|
|
CONFIG_ICPLUS_PHY=y
|
|
|
|
|
CONFIG_IIO=y
|
|
|
|
|
# CONFIG_IIO_BUFFER is not set
|
|
|
|
|
# CONFIG_IIO_TRIGGER is not set
|
|
|
|
|
CONFIG_INITRAMFS_COMPRESSION=""
|
|
|
|
|
CONFIG_INITRAMFS_ROOT_GID=1000
|
|
|
|
|
CONFIG_INITRAMFS_ROOT_UID=1000
|
|
|
|
|
CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-arm_cortex-a7_musl-1.1.14_eabi/root-mediatek /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
|
|
|
|
|
CONFIG_IOMMU_HELPER=y
|
|
|
|
|
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
|
|
|
|
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
|
|
|
|
|
CONFIG_IOMMU_SUPPORT=y
|
|
|
|
|
CONFIG_IRQCHIP=y
|
|
|
|
|
CONFIG_IRQ_DOMAIN=y
|
|
|
|
|
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
|
|
|
|
CONFIG_IRQ_FORCED_THREADING=y
|
|
|
|
|
CONFIG_IRQ_WORK=y
|
mediatek: Add support for the UniElec U7623-02
This commit adds support for the MT7623A-based UniElec U7623-02 router,
with eMMC storage and 512MB RAM. The router can be delivered with NAND
Flash and more memory, but I only have access to the one configuration.
The DTS is structured in such a way that adding support for
more/different storage/memory should be straight forward.
The device has the following specifications:
* MT7623A (quad-core, 1.3 GHz)
* 512MB RAM (DDR3)
* 8GB storage (eMMC 4.5)
* 2x normal miniPCIe slots
* 1x miniPCIe slot that is connected via an internal USB OTG port
* 5x 1Gbps Ethernet (MT7530 switch)
* 1x UART header
* 1x USB 3.0 port
* 1x SATA 3.0
* 1x 40P*0.5mm FPC for MIPI LCD
* 1x SIM slot
* 12x LEDs (2 GPIO controlled)
* 1x reset button
* 1x DC jack for main power (12V)
The following has been tested and is working:
* Ethernet switch
* miniPCIe slots (tested with Wi-Fi cards)
* USB 3.0 port
* sysupgrade
* reset button
Not working:
* The miniPCIe connected via USB OTG. For the port to work, some MUSB
glue must be added. I am currently in the process of porting the glue
from the vendor SDK.
Not tested:
* SATA 3.0
* MIPI LCD
Installation:
The board ships with u-boot, and the first installation needs to be done
via the bootloader using tftp. Step number one is to update the MBR of
the eMMC, as the one that ships with the device is broken. Since the
device can ship with different storage sizes, I will not provide the
exact steps for creating a valid MBR. However, I have made some
assumptions about the disk layout - there must be one 8MB recovery
partition (FAT32) and a partition for the rootfs (Linux).
The board loads the kernel from block 0xA00 (2560) and I have reserved
32MB for the kernel (65536 blocks). I have aligned the partitions on the
erase block size (4096 byte), so the recovery partition must start on
block 69632 and end on 86016 (16385 sectors). The rootfs is assumed to
start on sector 90112.
In order to install the mbr, you run the following commands from the
u-boot command line:
* tftpboot ${loadaddr} <name of mbr file>
* mmc device 0
* mmc write ${loadaddr} 0x00 1
Run the following commands to install + boot OpenWRT:
* tftpboot ${loadaddr} openwrt-mediatek-mt7623-7623a-unielec-u7623-02-emmc-512m-squashfs-sysupgrade-emmc.bin.gz
* run boot_wr_img
* run boot_rd_img
* bootm
Recovery:
In order to recover the router, you need to follow the installation
steps above (no need to replace MBR).
Notes:
* F2FS is used as the overlay filesystem.
* The device does not ship with any valid MAC address, so a random
address has to be generated. As a work-around, I write the initial
random MAC to a file on the recovery partition. The MAC of the WAN
interface is set to the MAC-address contained in this file on each boot,
and the address of the LAN-interfaces are WAN + 1. The MAC file is kept
across sysupgrade/firstboot.
My approach is slightly different than what the stock image does. The
first fives bytes of the MAC addresses in the stock image are static,
and then the last byte is random. I believe it is better to create fully
random MAC addresses.
* In order to support the miniPCIe-slots, I needed to add missing
pcie-nodes to mt7623.dtsi. The nodes are just c&p from the upstream
dtsi.
* One of the USB3.0 phys (u3phy2) on the board can be used as either USB
or PCI, and one of the wifi-cards is connected to this phy. In order to
support switching the phy from USB to PCI, I needed to patch the
phy-driver. The patch is based on a rejected (at least last time I
checked) PCI-driver submitted to the linux-mediatek mailing list.
* The eMMC is configured to boot from the user area, and according to
the data sheet of the eMMC this value can't be changed.
* I tried to structure the MBR more nicely and use for example a
FAT32-parition for the kernel, so that we don't need to write/read from
some offset. The bootloader does not support reading from
FAT32-paritions. While the command (fatload) is there, it just throws an
error when I try to use it.
* I will submit and hope to get the DTS for the device accepted
upstream. If and when that happens, I will update the patches
accordingly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
6 years ago
|
|
|
CONFIG_JBD2=y
|
|
|
|
|
CONFIG_KALLSYMS=y
|
|
|
|
|
CONFIG_LEDS_MT6323=y
|
|
|
|
|
CONFIG_LIBFDT=y
|
|
|
|
|
CONFIG_LOCK_SPIN_ON_OWNER=y
|
|
|
|
|
CONFIG_LZO_COMPRESS=y
|
|
|
|
|
CONFIG_LZO_DECOMPRESS=y
|
|
|
|
|
# CONFIG_MACH_MT2701 is not set
|
|
|
|
|
# CONFIG_MACH_MT6589 is not set
|
|
|
|
|
# CONFIG_MACH_MT6592 is not set
|
|
|
|
|
CONFIG_MACH_MT7623=y
|
|
|
|
|
# CONFIG_MACH_MT8127 is not set
|
|
|
|
|
# CONFIG_MACH_MT8135 is not set
|
|
|
|
|
CONFIG_MAGIC_SYSRQ=y
|
|
|
|
|
CONFIG_MDIO_BITBANG=y
|
|
|
|
|
CONFIG_MDIO_BUS=y
|
|
|
|
|
CONFIG_MDIO_DEVICE=y
|
|
|
|
|
CONFIG_MDIO_GPIO=y
|
|
|
|
|
CONFIG_MEDIATEK_MT6577_AUXADC=y
|
|
|
|
|
CONFIG_MEDIATEK_WATCHDOG=y
|
|
|
|
|
CONFIG_MFD_CORE=y
|
|
|
|
|
CONFIG_MFD_MT6397=y
|
|
|
|
|
CONFIG_MFD_SYSCON=y
|
|
|
|
|
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
|
|
|
|
CONFIG_MIGHT_HAVE_PCI=y
|
|
|
|
|
CONFIG_MIGRATION=y
|
|
|
|
|
CONFIG_MMC=y
|
|
|
|
|
CONFIG_MMC_BLOCK=y
|
|
|
|
|
CONFIG_MMC_MTK=y
|
|
|
|
|
CONFIG_MMC_SDHCI=y
|
|
|
|
|
# CONFIG_MMC_SDHCI_PCI is not set
|
|
|
|
|
CONFIG_MMC_SDHCI_PLTFM=y
|
|
|
|
|
# CONFIG_MMC_TIFM_SD is not set
|
|
|
|
|
CONFIG_MODULES_USE_ELF_REL=y
|
|
|
|
|
CONFIG_MTD_BLOCK2MTD=y
|
|
|
|
|
CONFIG_MTD_CMDLINE_PARTS=y
|
|
|
|
|
CONFIG_MTD_M25P80=y
|
|
|
|
|
CONFIG_MTD_MT81xx_NOR=y
|
|
|
|
|
CONFIG_MTD_NAND=y
|
|
|
|
|
CONFIG_MTD_NAND_ECC=y
|
|
|
|
|
CONFIG_MTD_NAND_MTK=y
|
|
|
|
|
CONFIG_MTD_SPI_NOR=y
|
|
|
|
|
CONFIG_MTD_SPLIT_FIRMWARE=y
|
|
|
|
|
CONFIG_MTD_SPLIT_UIMAGE_FW=y
|
|
|
|
|
CONFIG_MTD_UBI=y
|
|
|
|
|
CONFIG_MTD_UBI_BEB_LIMIT=20
|
|
|
|
|
CONFIG_MTD_UBI_BLOCK=y
|
|
|
|
|
# CONFIG_MTD_UBI_FASTMAP is not set
|
|
|
|
|
# CONFIG_MTD_UBI_GLUEBI is not set
|
|
|
|
|
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
|
|
|
CONFIG_MTK_EFUSE=y
|
|
|
|
|
# CONFIG_MTK_HSDMA is not set
|
|
|
|
|
CONFIG_MTK_INFRACFG=y
|
|
|
|
|
# CONFIG_MTK_IOMMU is not set
|
|
|
|
|
# CONFIG_MTK_IOMMU_V1 is not set
|
|
|
|
|
CONFIG_MTK_PMIC_WRAP=y
|
|
|
|
|
CONFIG_MTK_SCPSYS=y
|
|
|
|
|
CONFIG_MTK_THERMAL=y
|
|
|
|
|
CONFIG_MTK_TIMER=y
|
|
|
|
|
CONFIG_MULTI_IRQ_HANDLER=y
|
|
|
|
|
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
|
|
|
|
CONFIG_NEED_DMA_MAP_STATE=y
|
|
|
|
|
CONFIG_NEON=y
|
|
|
|
|
CONFIG_NET_DSA=y
|
|
|
|
|
CONFIG_NET_DSA_MT7530=y
|
|
|
|
|
CONFIG_NET_DSA_TAG_MTK=y
|
|
|
|
|
CONFIG_NET_FLOW_LIMIT=y
|
|
|
|
|
CONFIG_NET_MEDIATEK_SOC=y
|
|
|
|
|
CONFIG_NET_SWITCHDEV=y
|
|
|
|
|
# CONFIG_NET_VENDOR_AURORA is not set
|
|
|
|
|
CONFIG_NET_VENDOR_MEDIATEK=y
|
|
|
|
|
# CONFIG_NET_VENDOR_WIZNET is not set
|
|
|
|
|
CONFIG_NLS=y
|
|
|
|
|
CONFIG_NO_BOOTMEM=y
|
|
|
|
|
CONFIG_NO_HZ=y
|
|
|
|
|
CONFIG_NO_HZ_COMMON=y
|
|
|
|
|
CONFIG_NO_HZ_IDLE=y
|
|
|
|
|
CONFIG_NR_CPUS=4
|
|
|
|
|
CONFIG_NVMEM=y
|
|
|
|
|
CONFIG_OF=y
|
|
|
|
|
CONFIG_OF_ADDRESS=y
|
|
|
|
|
CONFIG_OF_ADDRESS_PCI=y
|
|
|
|
|
CONFIG_OF_EARLY_FLATTREE=y
|
|
|
|
|
CONFIG_OF_FLATTREE=y
|
|
|
|
|
CONFIG_OF_GPIO=y
|
|
|
|
|
CONFIG_OF_IRQ=y
|
|
|
|
|
CONFIG_OF_MDIO=y
|
|
|
|
|
CONFIG_OF_NET=y
|
|
|
|
|
CONFIG_OF_PCI=y
|
|
|
|
|
CONFIG_OF_PCI_IRQ=y
|
|
|
|
|
CONFIG_OF_RESERVED_MEM=y
|
|
|
|
|
CONFIG_OLD_SIGACTION=y
|
|
|
|
|
CONFIG_OLD_SIGSUSPEND3=y
|
|
|
|
|
CONFIG_PADATA=y
|
|
|
|
|
CONFIG_PAGE_OFFSET=0xC0000000
|
|
|
|
|
CONFIG_PCI=y
|
|
|
|
|
CONFIG_PCIEAER=y
|
|
|
|
|
CONFIG_PCIEPORTBUS=y
|
|
|
|
|
CONFIG_PCIE_MEDIATEK=y
|
|
|
|
|
CONFIG_PCIE_PME=y
|
|
|
|
|
CONFIG_PCI_DOMAINS=y
|
|
|
|
|
CONFIG_PCI_DOMAINS_GENERIC=y
|
|
|
|
|
CONFIG_PCI_MSI=y
|
|
|
|
|
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
|
|
|
|
CONFIG_PERF_USE_VMALLOC=y
|
|
|
|
|
CONFIG_PGTABLE_LEVELS=2
|
|
|
|
|
CONFIG_PHYLIB=y
|
|
|
|
|
CONFIG_PHY_MTK_TPHY=y
|
|
|
|
|
CONFIG_PINCTRL=y
|
|
|
|
|
CONFIG_PINCTRL_MT2701=y
|
|
|
|
|
CONFIG_PINCTRL_MT6397=y
|
|
|
|
|
CONFIG_PINCTRL_MTK=y
|
|
|
|
|
CONFIG_PM=y
|
|
|
|
|
CONFIG_PM_CLK=y
|
|
|
|
|
# CONFIG_PM_DEBUG is not set
|
|
|
|
|
CONFIG_PM_GENERIC_DOMAINS=y
|
|
|
|
|
CONFIG_PM_GENERIC_DOMAINS_OF=y
|
|
|
|
|
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
|
|
|
|
|
CONFIG_PM_OPP=y
|
|
|
|
|
CONFIG_PM_SLEEP=y
|
|
|
|
|
CONFIG_PM_SLEEP_SMP=y
|
|
|
|
|
CONFIG_POWER_RESET=y
|
|
|
|
|
CONFIG_POWER_SUPPLY=y
|
|
|
|
|
CONFIG_PREEMPT=y
|
|
|
|
|
CONFIG_PREEMPT_COUNT=y
|
|
|
|
|
# CONFIG_PREEMPT_NONE is not set
|
|
|
|
|
CONFIG_PREEMPT_RCU=y
|
|
|
|
|
CONFIG_PRINTK_TIME=y
|
|
|
|
|
CONFIG_PWM=y
|
|
|
|
|
CONFIG_PWM_MEDIATEK=y
|
|
|
|
|
# CONFIG_PWM_MTK_DISP is not set
|
|
|
|
|
CONFIG_PWM_SYSFS=y
|
|
|
|
|
CONFIG_RAS=y
|
|
|
|
|
CONFIG_RATIONAL=y
|
|
|
|
|
CONFIG_RCU_CPU_STALL_TIMEOUT=21
|
|
|
|
|
# CONFIG_RCU_EXPERT is not set
|
|
|
|
|
CONFIG_RCU_NEED_SEGCBLIST=y
|
|
|
|
|
CONFIG_RCU_STALL_COMMON=y
|
|
|
|
|
CONFIG_REGMAP=y
|
|
|
|
|
CONFIG_REGMAP_I2C=y
|
|
|
|
|
CONFIG_REGMAP_MMIO=y
|
|
|
|
|
CONFIG_REGMAP_SPI=y
|
|
|
|
|
CONFIG_REGULATOR=y
|
|
|
|
|
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
|
|
|
|
CONFIG_REGULATOR_GPIO=y
|
|
|
|
|
CONFIG_REGULATOR_MT6323=y
|
|
|
|
|
# CONFIG_REGULATOR_MT6380 is not set
|
|
|
|
|
# CONFIG_REGULATOR_MT6397 is not set
|
|
|
|
|
# CONFIG_REGULATOR_QCOM_SPMI is not set
|
|
|
|
|
CONFIG_RESET_CONTROLLER=y
|
|
|
|
|
CONFIG_RFS_ACCEL=y
|
|
|
|
|
CONFIG_RPS=y
|
|
|
|
|
CONFIG_RTC_CLASS=y
|
|
|
|
|
# CONFIG_RTC_DRV_CMOS is not set
|
|
|
|
|
# CONFIG_RTC_DRV_MT6397 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_MT7622 is not set
|
|
|
|
|
CONFIG_RTC_I2C_AND_SPI=y
|
|
|
|
|
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
|
|
|
|
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
|
|
|
|
# CONFIG_SCHED_INFO is not set
|
|
|
|
|
# CONFIG_SCSI_DMA is not set
|
|
|
|
|
# CONFIG_SERIAL_8250_DMA is not set
|
|
|
|
|
CONFIG_SERIAL_8250_FSL=y
|
|
|
|
|
CONFIG_SERIAL_8250_MT6577=y
|
|
|
|
|
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
|
|
|
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
|
|
|
CONFIG_SMP=y
|
|
|
|
|
# CONFIG_SMP_ON_UP is not set
|
|
|
|
|
CONFIG_SPARSE_IRQ=y
|
|
|
|
|
CONFIG_SPI=y
|
|
|
|
|
CONFIG_SPI_BITBANG=y
|
|
|
|
|
CONFIG_SPI_MASTER=y
|
|
|
|
|
CONFIG_SPI_MT65XX=y
|
|
|
|
|
CONFIG_SPMI=y
|
|
|
|
|
CONFIG_SRCU=y
|
|
|
|
|
# CONFIG_STRIP_ASM_SYMS is not set
|
|
|
|
|
CONFIG_SUSPEND=y
|
|
|
|
|
CONFIG_SUSPEND_FREEZER=y
|
|
|
|
|
CONFIG_SWCONFIG=y
|
|
|
|
|
CONFIG_SWIOTLB=y
|
|
|
|
|
CONFIG_SWPHY=y
|
|
|
|
|
CONFIG_SWP_EMULATE=y
|
|
|
|
|
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
|
|
|
CONFIG_TASKS_RCU=y
|
|
|
|
|
CONFIG_THERMAL=y
|
|
|
|
|
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
|
|
|
|
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
|
|
|
|
CONFIG_THERMAL_GOV_STEP_WISE=y
|
|
|
|
|
CONFIG_THERMAL_OF=y
|
|
|
|
|
# CONFIG_THUMB2_KERNEL is not set
|
|
|
|
|
CONFIG_TICK_CPU_ACCOUNTING=y
|
|
|
|
|
CONFIG_TIMER_OF=y
|
|
|
|
|
CONFIG_TIMER_PROBE=y
|
|
|
|
|
CONFIG_TREE_SRCU=y
|
|
|
|
|
CONFIG_UBIFS_FS=y
|
|
|
|
|
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
|
|
|
CONFIG_UBIFS_FS_LZO=y
|
|
|
|
|
CONFIG_UBIFS_FS_ZLIB=y
|
|
|
|
|
CONFIG_UEVENT_HELPER_PATH=""
|
|
|
|
|
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
|
|
|
|
CONFIG_UNINLINE_SPIN_UNLOCK=y
|
|
|
|
|
CONFIG_USB=y
|
|
|
|
|
CONFIG_USB_COMMON=y
|
|
|
|
|
# CONFIG_USB_EHCI_HCD is not set
|
|
|
|
|
CONFIG_USB_SUPPORT=y
|
|
|
|
|
CONFIG_USB_XHCI_HCD=y
|
|
|
|
|
CONFIG_USB_XHCI_MTK=y
|
|
|
|
|
CONFIG_USB_XHCI_PLATFORM=y
|
|
|
|
|
CONFIG_USE_OF=y
|
|
|
|
|
CONFIG_VECTORS_BASE=0xffff0000
|
|
|
|
|
CONFIG_VFP=y
|
|
|
|
|
CONFIG_VFPv3=y
|
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
|
|
|
CONFIG_WATCHDOG_CORE=y
|
|
|
|
|
CONFIG_XPS=y
|
|
|
|
|
CONFIG_XZ_DEC_ARM=y
|
|
|
|
|
CONFIG_XZ_DEC_BCJ=y
|
|
|
|
|
CONFIG_ZBOOT_ROM_BSS=0
|
|
|
|
|
CONFIG_ZBOOT_ROM_TEXT=0
|
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
